Water Bath

• Model number: HC-80
• Size (mm): 150 x 185 x 373
• main body material: stainless steel (SUS304)
• temperature settings range: R.T. + 10 to 80 ? C
• Temperature adjustment accuracy: ? 2 ? C (Performance of a single controller)
• Temperature control method: PID control
• Temperature display: LCD digital display
• Heater capacity: 900 W
• Safety device: Circulating water discharge detection and alarm lamp display (ON) (Heater pumps power supply OFF)
• pumps: Magnet pumps (Pump priming needs), maximum pumping volume 2.1 to 2.7 m, circulating water volume 5.5 / 6.0 L/min, viscosity range: 30 mPa*s or less
• power supply: AC100V 50 / 60Hz 15 A
• Weight is about 4.5 kg
• * The hose is not included. inner diameter f 12 mm hoses are available
• * Not available for pure water.
• Integrates pipe heater and circulation pump to heat and stir water inside.
• If circulation water flow stops, water stoppage detector shuts off heater pump power and turns on warning lamp.

• Temperature settings range: Room temperature +5? - 95?
• Chamber capacity: f208 x 120mm
• Control system: Microcomputer type proportional control
• Setting system: Analog scale method (scale width 5?)
• Display system: Dial scale display
• Temperature sensor: Bending thermometer (Pt100O)
• Heater material: Stainless steel (SUS304), Pipe heater
• Heater capacity: 750w
• Power switch: Rocker switch
• Safety device: Overcurrent protection fuse, Temperature fuse
• Power supply: 100VAC, 50/60Hz
• Accessories: Stick thermometer
• External dimensions: 250 x 310 x 150mm
• Model number: HWA-50A
• Pursued functionality and temperature control stability.
• Adopt microcomputer type proportional control(HWA-50A) and microcomputer type PID control(HWD-50D) as temperature control, and perform highly precise temperature control.
• Large-sized dial(HOA-50A) and 2-steps of PV-SV digital display(HOA-50D) excellent in operativity is adopted as temperature setting.
• Adopt LED for prevention from burn as main part, and consider safety.

• Temperature settings range: Room temperature +5? - 95?
• Chamber capacity: f208 x 120mm
• Control system: Microcomputer type PID control
• Setting system: Sheet key input system
• Display system: LED digital display
• Temperature sensor: Bending thermometer (Pt100O)
• Heater material: Stainless steel (SUS304), Pipe heater
• Heater capacity: 750w
• Power switch: Rocker switch
• Safety device: Overcurrent protection fuse, Temperature fuse + burnout mechanism
• Additional function: Timer function
• Power supply: 100VAC, 50/60Hz
• Accessories: Stick thermometer
• External dimensions: 250 x 310 x 150mm
• Model number: HWA-50D
• Pursued functionality and temperature control stability.
• Adopt microcomputer type proportional control(HWA-50A) and microcomputer type PID control(HWD-50D) as temperature control, and perform highly precise temperature control.
• Large-sized dial(HOA-50A) and 2-steps of PV-SV digital display(HOA-50D) excellent in operativity is adopted as temperature setting.
• Adopt LED for prevention from burn as main part, and consider safety.

• Outer dimension (mm): 260 x 266 (280)*1 x 266
• Chamber dimensions (mm): f180 x 180
• Water tank volume: 4L
• Body material: Stainless steel (SUS430)
• Water tank material: Stainless steel (SUS316)
• Temperature settings range: Room temperature +5 - 80?
• Temperature display precision: +/- 2?
• Temperature sensor: K class thermocouple
• Temperature control system: Microcomputer PID control
• Timer setting range: 0 - 99 hours 59 minutes
• Attachable thermometer size: f7 - f10mm
• Safety device: Temperature excessive rise prevention device, overcurrent prevention fuse
• Heater capacity: Sheathed heater 800W
• Power supply: 100VAC 50/60Hz 850W
• Power cord: 2.5m (3P plug, with 2P conversion adapter)
• Weight: Approx 7kg
• Water tank removable type
• *1 ( ) is the dimension including protrusions.
• Model number: WB-80S
• Detachable water bath can be fully washed.
• Excellent in temperature distribution because water bath is heated from bottom and sides.
• Overheat protection device is provided as standard.
• Operation switches are panel waterproof types(IP67 compliant).

• Shaking speed: 20mm (turning)/20 - 160rpm
• Number of shaking rack frames: f10mm test tube x 120
• Water tank material: Stainless steel (SUS304)
• Chamber capacity: 13L
• Turning shaking method
• Shaking table dimensions: 174 x 180 x 130mm
• Outer dimension (mm): 495 x 570 x 275
• Chamber dimensions (mm): 300 x 500 x 150
• Power supply: 100VAC, 50/60Hz, 100W
• Power cord length: 2.5m, 3P plug with ground pin (with 3P-2P conversion adapter), Accessories: Shaking rack (SUS304)
• Model number: SBR-20
• This product is shaking-type water bath with high stirring efficiency.
• Water bath is removable, so water can be replaced easily.
• This product works as constant-temperature shaking water bath when thermal-lobo series is installed.
• The shaking rack holding test tubes, and flasks, naving double spring structure.

• Shaking speed: 20mm (turning)/20 - 160rpm
• Number of shaking rack frames: f10mm test tube x 252
• Water tank material: Stainless steel (SUS304)
• Chamber capacity: 20L
• Turning shaking method
• Shaking table dimensions: 244 x 290 x 130mm
• Outer dimension (mm): 420 x 450 x 275
• Chamber dimensions (mm): 230 x 390 x 150
• Power supply: 100VAC, 50/60Hz, 100W
• Power cord length: 2.5m, 3P plug with ground pin (with 3P-2P conversion adapter), Accessories: Shaking rack (SUS304)
• Model number: SBR-13
• This product is shaking-type water bath with high stirring efficiency.
• Water bath is removable, so water can be replaced easily.
• This product works as constant-temperature shaking water bath when thermal-lobo series is installed.
• The shaking rack holding test tubes, and flasks, naving double spring structure.

• Material: Aluminum (surface anodic oxide processing)
• Internal dimensions: 104 x 126 x 122mm
• Weight: Approx 1.8kg
• Size (mm): 120 x 142 x 130
• *You cannot contain liquid in aluminum beads bath.
• Model number: Aluminum beads bath
• A Peltier device is used to cool the plate surface constantly.(The temperature will not lower to or below 0? due to the excessive cooling prevention function.)
• When an aluminum block(sold separately)is used, the unit keeps the sample at a low temperature efficiently.
• The aluminum beads bath can keep the sample cool efficiently when used with aluminum beads.
• When used with a cold insulation box, samples can be kept cool more effectively as they are less susceptible to the ambient air.
• The cold insulation case allows the user to view the inside from the top and open/close the top cover.

• Model number: SCB-S
• external dimension (mm): 115 x 85
• inner size (mm): 106 x 66
• Material: stainless steel (SUS304)
• * For a high power stirrer, see 1-4136-01.
• Excellent in keeping cool and retaining warmth with vacuum thermal insulating structure.
• Hard to be damaged by shock and can be used safely.
• Liquid in bath can be stirred with magnet stirrer.

• Model number: SCB-L
• external dimension (mm): 147 x 110
• inner size (mm): 135 x 90
• Material: stainless steel (SUS304)
• * For a high power stirrer, see 1-4136-01.
• Excellent in keeping cool and retaining warmth with vacuum thermal insulating structure.
• Hard to be damaged by shock and can be used safely.
• Liquid in bath can be stirred with magnet stirrer.

• Top board material: Stainless steel (SUS304)
• Motor: Induction motor
• Withstand load: 12kg
• Size: 200 x 240 x 155mm
• Weight: 4.3kg
• Magnet strength: 0.25T
• Power supply: 100VAC 50/60Hz 1A
• Model number: HPS-100B
• Rotation speed (rpm): 50 - 1400
• By the air heat insulating layer between a top plate and electric part, it can agitate of oil bath.
• Agitate powerfully with powerful magnet.

• Model number: HTC-1000
• Sealed system circulation method
• Highest temperature rise time: About 90 minutes (when using as constant temperature water tank)
• Time settings range: 0 minute - 99 hours (1 minute unit)
• Temperature settings unit: 1?
• Pump capacity: Maximum flow/17/20L/min, Maximum head/9.9/13.2m
• External dimensions: 505 x 360 x 370mm
• Internal dimensions: 300 x 300 x 300 (usable dimensions: 225) mm
• Circulation connection port (inlet, outlet) outer diameter: 11mm
• Water tank volume: 27L
• Safety device: Self-diagnosis function (Upper or lower limit temperature abnormality detection, heater disconnection detection, sensor abnormality detection), electrical leakage and overcurrent breaker, abnormal heating prevention device, float type no-water burning prevention
• Power supply: AC100V 50/60Hz 23A
• Weight: Approx 25kg
• Temperature control width: Within ?0.5?
• Temperature adjustment range (?): Room temperature +25 - 90
• *Performance is ambient temperature 25?, when closed the cover with water volume of 25L.

• Model number: RTS-1973
• Capacity: 19L
• Body material: PC (polycarbonate)
• Maximum outer diameter: 367fmm
• Inner diameter: f306mm
• Overall height: 498mm (including vacuum gauge)
• Metal cock outer diameter: Side of body/f9mm, Vacuum gauge/f8mm
• Weight: Approx 3kg
• Simple and compact design.
• By reducing pressure in water, can be checked leak status in containers.
• Body is sturdy by PC(polycarbonate) made.
• Can hold vacuum status without using grease.

• Model number: JC-S1
• Size: Overall height/400mm, Coil diameter/150mm
• Heat transfer area: 0.1m2
• Material: Stainless steel (SUS304)
• Coil diameter: Inner diameter/f6mm, Outer diameter/f8mm
• Coil height: 115mm
• Coil length: 4.1m
• Number of turns: 7
• Leave it stand alone in approx.10~20*l* of liquid in vat, send water, warm water, steam, etc. to the coil tube, and cool and heat them.

• Model number: JC-S2
• Size: Overall height/400mm, Coil diameter/150mm
• Heat transfer area: 0.15m2
• Material: Stainless steel (SUS304)
• Coil diameter: Inner diameter/f6mm, Outer diameter/f8mm
• Coil height: 165mm
• Coil length: 6.0m
• Number of turns: 11.5
• Leave it stand alone in approx.10~20*l* of liquid in vat, send water, warm water, steam, etc. to the coil tube, and cool and heat them.

• Model number: JC-S3
• Size: Overall height/400mm, Coil diameter/150mm
• Heat transfer area: 0.20m2
• Material: Stainless steel (SUS304)
• Coil diameter: Inner diameter/f6mm, Outer diameter/f8mm
• Coil height: 225mm
• Coil length: 7.9m
• Number of turns: 15.5
• Leave it stand alone in approx.10~20*l* of liquid in vat, send water, warm water, steam, etc. to the coil tube, and cool and heat them.

• Digital incubator flat type (body)
• Size (mm): 97 x 342 x 231
• Weight: 3kg
• Temperature settings range: Room temperature +5 - 80?
• Temperature control accuracy: +/- 0.1?
• Temperature control system: Digital display, platinum sensor PID control
• Heater unit size: 140mm
• Heater capacity: 1kW
• Agitator: Jet pump
• Protective device: With float type no-water burning prevention function
• Power supply: 100VAC 50/60Hz
• Power cord length: 1.8m (3P plug)
• Model number: HT-10DN
• *Actual product has white rim for acrylic water tank.
• Possible to set main body simply by placing it in corner of shallow water bath.
• Float type dry heating protector is provided.
• When used with transferring branch pipe, possible to circulate constant temperature water through external sealed water bath.
• Possible to used as constant temperature bath excellent in accuracy by setting it in even plastic container or stainless steel tray.
• HT-100VND can adjust flow rate and is provided with water bath(outer dimensions:334?198?158*mm*).

• Digital incubator flat type (body)
• Size (mm): 105 x 142 x 320
• Weight: 3.3kg
• Temperature settings range: Room temperature +5 - 80?
• Temperature control accuracy: +/- 0.1?
• Temperature control system: Digital display, platinum sensor PID control
• Heater unit size: 140mm
• Heater capacity: 1kW
• Agitator: Jet pump
• Protective device: With float type no-water burning prevention function
• Power supply: 100VAC 50/60Hz
• Power cord length: 1.8m (3P plug)
• Model number: HT-90DN
• Possible to set main body simply by placing it in corner of shallow water bath.
• Float type dry heating protector is provided.
• When used with transferring branch pipe, possible to circulate constant temperature water through external sealed water bath.
• Possible to used as constant temperature bath excellent in accuracy by setting it in even plastic container or stainless steel tray.
• HT-100VND can adjust flow rate and is provided with water bath(outer dimensions:334?198?158*mm*).

• Model number: AS-FRACK2
• Suitable tube diameter (f mm): approx. 215 x 170 x 490 mm (When Used)
• Material: Water repellent paper (Freezers can be used.)
• number of step: 7 stages
• Comfortable Free Bock Socks: 147 x 160 x 55 mm
•
• Non-water absorbent material to make it easy to remove tubes are in low-temperature storage.
• Convenient handle provides easy removal from racks and similar fixtures.
•
• Made of water-repellent paper so that fingertips do not feel cold when carrying in comparison with metal products and to decrease risk of frostbite.
• Possible to folded to save space when stored.

• Material: MDPE (medium density polyethylene)
• Water soluble acrylic adhesive
• Thickness: 35?m/layer (film)
• With serial number (countdown)
• Size (mm): 300 x 300
• Hole size (mm): f150
• Quantity: 1 sheet (30 lamination)
• Sheets designed to be attached to air shower wall.
• It helps to promoteworkplace organization methodology of 5S (sorting, setting-in-order, shining, standardizing and sustaining) because garbage and foreign object are visible.
• Multi-layered type sheets, each of sheet can be peeled off and thrown.
• Featuring tags to count down sheets by peeling off films.

• Specification: White, Strong Adhesion
• Size (mm): 300 x 300
• Quantity: 1 Sheet (30 Layers)
• Material: MDPE (Medium Density Polyethylene)
• Water-Soluble Acrylic Adhesive
• Thickness: 35?m/layer (film)
• Hole size: f150mm
• With serial number (countdown)