R & L
Bunsen burner 11mm, for LPG
R & L
• Overall height: 124 mm <p> • O.D. Of Inlet: 9.25 mm <p> • I.D. Of Outlet: 7.0 mm <p>
$0
Bunsen burner 11mm, for LPG
R & L
• Overall height: 124 mm <p> • O.D. Of Inlet: 9.25 mm <p> • I.D. Of Outlet: 7.0 mm <p>
$0
Retort ring with bosshead 50mm
R & L
• Mild steel <p>
• ID: 50mm <p>
$0
Retort ring with bosshead 75mm
R & L
• Mild steel <p>
• ID: 75mm <p>
$0
Retort ring with bosshead 106mm
R & L
• Mild steel <p>
• ID: 106mm <p>
$0
Tripod, circular, 210mm (H)
R & L
• Zinc plated steel<br>
• 150 (OD) x 135mm (ID)<br>
$0
Test tube holder
R & L
• Constructed in spring steel and nickel plated <p>
• Accepts tubes up to 50mm dia <p>
• Overall length: 130mm <p>
<p>
$0
Meker burner 20mm, for LPG
R & L
• Made of brass & all nickel plated <p>
• Top of the burner is fitted with a perforated steel head, which gives off multiple small but very hot flames <p>
• Not fitted with an air regulator <p>
• Burner head dia: 20mm (ceramic) <p>
&bul
$0
Bunsen burner 11mm, for Natural Gas
R & L
• Overall height: 124 mm <p>
• O.D. Of Inlet: 9.25 mm <p>
• I.D. Of Outlet: 7.0 mm <p>
• With air regulator <p>
• Brass finish <p>
$0
Bunsen burner 13mm, for LPG
R & L
• Overall height: 145 mm <p>
• O.D. Of Inlet: 9.25 mm <p>
• I.D. Of Outlet: 9.0 mm <p>
• With air regulator <p>
• Brass finish <p>
$0
Bypass burner, for LPG
R & L
• With gas control stopcock and pilot ignition flame <p>
• All parts nickel-plated <p>
• With air regulator <p>
• Overall height: 171 mm <p>
• O.D. Of Inlet: 9.25 mm <p>
• I.D. Of Outlet: 9.0 mm <p>
$0
Lab Jack, plate size 150 x 150mm
R & L
• Made of aluminium with stainless steel operating screw <p>
• The top and bottom plates are specially designed aluminium extrusion giving exceptional rigid and robust support without excessive weight <p>
• The plates are blue anodised finis
$0
Bunsen burner 11mm, for Coal Gas
R & L
• Overall height: 124 mm <p>
• O.D. Of Inlet: 9.25 mm <p>
• I.D. Of Outlet: 7.0 mm <p>
• With air regulator <p>
• Brass finish <p>
$0
Burette holder, Diecast alloy
R & L
• Can be clamped either vertically or horizontally to a 13mm retort rod using the plastic headed nickel plated steel screw <p>
• Suitable for burettes up to 100ml capacity <p>
$0
Spread base, rod centre / foot centre 135mm
R & L
• Manufactured in cast iron and painted acrylic blue <p>
• With central rod hole tapped 10mm fitted with rubber feet <p>
$0
Retort clamp
R & L
• Diecast in alloy and fitted with an aluminium shaft <p>
• Accepts articles up to 85mm diameter <p>
• Cork lined interlocking jaws <p>
$0
Retort base 160mm x 100mm (Blue Acrylic Base)
R & L
• Manufactured in steel <p>
• Has 10mm tapped bush pressed in to them to take the 3108 series rods <p>
• Fitted with rubber feet <p>
$0
Retort base 200mm x 125mm (Blue Acrylic Base)
R & L
• Manufactured in steel <p>
• Has 10mm tapped bush pressed in to them to take the 3108 series rods <p>
• Fitted with rubber feet <p>
$0
Retort rod 12.5 x 600mm (Aluminium)
R & L
• Threaded 10mm <p>
• Rod dia: 12.5mm <p>
• Rod length: 600mm <p>
$0
Hoffman clip 12mm, bottom hinged (Pack of 5)
R & L
• With fine adjusting screw <p>
• Nickel plated brass <p>
$0