Pump

Pump
[Global Model] Circulation Type Handy Cooler TRL-108H AC220V

[Global Model] Circulation Type Handy Cooler TRL-108H AC220V

AS ONE Corporation
• External dimension :W265 X D375 X H580mm
• Inner dimension:W180 X D110 X H180mm
• Temperature range:-10?~+80?
• Temperature control :Temperature digital indicating PID control
• Temperature accuracy:?0.05?
• Refrigerator :Air cooling 130W
• Refrigerant :HFC-134a
• Cooling ability:180W(at 10? 50Hz)
• Circulation pump:Magnet pump 20W Combined agitator pump function Max.lift :head 2m Max.head :9L/min.
• Safety device:Earth leakage breaker
• HIGH Alarm, LOW Alarm, LOW LEVEL Alarm
• Refrigerator protection thermostat,
• Temperature sensor failure alarm
• Timer :Auto Start timer or Auto Stop timer
• Material : Inner basin Stainless steel (SUS-304)?External housing Steel plate with baked enamel finish
• Accessory Lid : 1 peace
• Power supply:AC220 V single-phase 4A 50Hz
[Global Model] Oil-Sealed Rotary Vacuum Pump

[Global Model] Oil-Sealed Rotary Vacuum Pump

AS ONE Corporation
• Execution 60Hz: 50Hz/280 L/min, exhaust speed/336 L/min
• Reaching pressure: G.V. Closed/0.67 Pa, G.V. Open/6.7 Pa
• Motor used: 3 phase, 200 -240 V/380 -460 V, 750 W, 4P
• Total Load Current (A)
• 50Hz : 3.6 (200 V) , 3.7 (220 V) , 4.0 (230 V) , 4.2 (240 V) , 2.1 (400 V) , 2.3 (380 V) , 2.4 (415 V)
• 60Hz : 3.3 (200 V) , 3.2 (220 V) , 3.2 (230 V) , 3.2 (240 V) , 1.9 (380 V) , 1.9 (400 V) , 1.9 (440 V) , 2.0 (460 V)
• Amount of oil: 700 to 1,100 mL
• Oil used: R -7
• Mass: 34.5 kg
• Intake pipe diameter: KF -25
• Operating ambient temperature range: 7 to 40 ? C.
• Max Dimensions: 181 (W) x 536 (L) x 269 (H)
• RoHS Compliant: Yes
• Power suply: 200-240V
• *The ultimate pressure is measured by the Pirani gauge.
• *Power supply plugs and power cord are not included.
• Country of origin: China
[Global Model]Diaphragm Dry Vacuum Pump 24.0kPa

[Global Model]Diaphragm Dry Vacuum Pump 24.0kPa

AS ONE Corporation
• Model number: DAP-12S
• Discharge air volume: 12/14 (L/min) (50/60Hz)
• Achieving pressure: 24.0kPa
• Exhaust speed (effective) (L/min): 12/14(50/60Hz)
• Power supply: 1f220-230V 50/60Hz
• Power consumption: 10W
• Full load current: 0.39/0.43A (50/60Hz)
• Intake, exhaust port diameter: Rc1/8
• Size: 93 x 163 x 100.6mm
• Weight: 1.9kg
• *Inlet and exhaust pipes are not included in the package.
• Country of origin: Japan
[Global Model]Diaphragm Dry Vacuum Pump 6.65kPa

[Global Model]Diaphragm Dry Vacuum Pump 6.65kPa

AS ONE Corporation
• Model number: DAP-6D
• Discharge air volume: 6/7 (L/min) (50/60Hz)
• Achieving pressure: 6.65 (kPa)
• Exhaust speed (effective) (L/min): 6/7(50/60Hz)
• Power supply: 1f220-230V 50/60Hz
• Power consumption: 10W
• Full load current: 0.39/0.43A (50/60Hz)
• Intake, exhaust port diameter: Rc1/8
• Size: 93 x 163 x 100.6mm
• Weight: 1.9kg
• *Inlet and exhaust pipes are not included in the package.
• Country of origin: Japan
[Global Model]Dry Vacuum Pump (Pressurizing/Depressurizing Convertible Diaphragm Type) 33.3kPa

[Global Model]Dry Vacuum Pump (Pressurizing/Depressurizing Convertible Diaphragm Type) 33.3kPa

AS ONE Corporation
• Model number: DAP-30
• Discharge air volume: 30/36 (L/min)
• Exhaust speed (L/min): 30/36
• Achieving pressure (kPa): 33.3
• Pressurization: 0.15MPa (gauge pressure)
• Intake and exhaust port: (OD) f9 x (ID) f5mm
• Power supply: 1f220V
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/CR
• Size: 142 x 215 x 180mm
• Weight: 3.6kg
• Internal thermal protector
• Diaphragm type for both pressurizing and de-pressurizing
• Country of origin: Japan
[Global Model]Dry Vacuum Pump 13.3kPa

[Global Model]Dry Vacuum Pump 13.3kPa

AS ONE Corporation
• Model number: ?DA-120S
• Exhaust speed (L/min): 120/144
• Achieving pressure (kPa): 13.3
• Inlet diameter (OD) x (ID) mm: 14 x 9
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 162 x 358 x 238
• Weight (kg): 19
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/EPDM (ethylene propylene rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan
[Global Model]Dry Vacuum Pump 19.9kPa

[Global Model]Dry Vacuum Pump 19.9kPa

AS ONE Corporation
• Model number: ?DA-40S
• Discharge air volume: 40/46 (L/min)
• Exhaust speed (L/min): 40/46
• Achieving pressure (kPa): 19.9
• Inlet diameter (OD) x (ID) mm: 9 x 5
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 128 x 242 x 178
• Weight (kg): 7.2
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/heat-resistant NBR (nitrile rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan
[Global Model]Dry Vacuum Pump 3.32kPa

[Global Model]Dry Vacuum Pump 3.32kPa

AS ONE Corporation
• Model number: ?DA-60D
• Exhaust speed (L/min): 60/72(50/60Hz)
• Achieving pressure (kPa): 3.32
• Inlet diameter (OD) x (ID) mm: 14 x 9
• Internal thermal protector
• Power supply: 1f220V 50/60Hz
• Size (mm): 156 x 358 x 238
• Weight (kg): 19
• Gas contact unit material: Pump head/aluminum die cast, Intake and exhaust valve/Stainless steel, Diaphragm/EPDM (ethylene propylene rubber)
• *Unloader valve is an option (A mechanism that eliminates the differential pressure between pump head and outside by inhaling outside air into the pump head when a diaphragm type dry vacuum pump stops operating).
• Country of origin: Japan