Laboratory Furniture & Storage

Laboratory Furniture & Storage
Manufacturers
Sort By
Desiccator

Desiccator

AS ONE Corporation

• Material: Body/AS (acrylonitrile styrene) resin
• Rubber feet Height: 15mm
• Shelf board shelf spacing: 65mm
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: Approx 5kg
• Weight (including shelf board): Approx 8.8kg
• Outer dimensions: 350 x 350 x 750mm
• Inner dimension: 340 x 344.5 x 743mm
• Accessories: 4 shelf boards, Silica gel for 1 plate
• Model number: HW
• Flat door realized horizontal arrangement storage shapely.
• Joint Frame H Type (2H type) enables stacking and lateral storage.
• Taking in and out of objects smoothly from one-touch opening-and-closing type door are possible.
$0
Sit Stand Chair with Back

Sit Stand Chair with Back

AS ONE Corporation

• Seat part: PU (polyurethane), solid casting
• Leg: Steel coating finish
• Up-and down method: Gas cylinder type
• Weight: Approx 9kg
• Sitting height (mm): 650 - 800
• Model number: ERC-1
• Seat is made of integrally molded polyurethane foam that has good resistance to scratches and stains. It is suitable for use in laboratories or work sites.
• High seating height makes this chair suitable both as supporter for standing work and chair for sitting down.
• For sitting down, it is recommended to use ERC-1 with large seating face and lumbar support. As support for standing work, it is recommended to use ERC-2 that is easy to lean back on.
$0
Sit Stand Chair without Back

Sit Stand Chair without Back

AS ONE Corporation

• Seat part: PU (polyurethane), solid casting
• Leg: Steel coating finish
• Up-and down method: Gas cylinder type
• Weight approx 8kg
• Sitting height (mm): 650 - 800
• Model number: ERC-2
• Seat is made of integrally molded polyurethane foam that has good resistance to scratches and stains. It is suitable for use in laboratories or work sites.
• High seating height makes this chair suitable both as supporter for standing work and chair for sitting down.
• For sitting down, it is recommended to use ERC-1 with large seating face and lumbar support. As support for standing work, it is recommended to use ERC-2 that is easy to lean back on.
$0
IC-150MA for Shelf Board, Shelf Board Receiving

IC-150MA for Shelf Board, Shelf Board Receiving

AS ONE Corporation

• Model number: shelf board
• Material: Stainless steel (SUS304)
• Shelf board load capacity: Approx 5kg
• Size: 178 x 215mm
• Shelf pitch: 30mm (Maximum 6 stages)
• Because it is performance which PID control by microcomputer is adopted as temperature control, it is highly precise, and stabilized.
• 4 kinds of timer functions are equipped standardly.
• Temperature display adopts 2 steps display of PV and SV, and can check actual measurement and preset value at glance.
$0
Dry Boy

Dry Boy

AS ONE Corporation

• External dimensions (mm): 350 x 453 x 800
• Inner dimensions (mm): 324 x 398 x 409 (? 2 rooms)
• Material: Frame/Steel Plate melamine baking coating, Front/Glass
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolyte membrane
• Humidity: 25 %RH (With no load inside, due to environment used)
• Dehumidifying element film area: 30 x 30mm
• Power supply: AC100V 50/60 Hz 3W
• Weight: 18 kg
• Accessories: 2 pieces x 2 pieces, Key x shelf board, Digital Humidity Monitor (THA-01M), triangle Tap
$0
Dry Boy

Dry Boy

AS ONE Corporation

• External dimensions (mm): 350 x 863 x 400
• Inner dimensions (mm): 324 x 398 x 409 (? 2 rooms)
• Material: Frame/Steel Plate melamine baking coating, Front/Glass
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolyte membrane
• Humidity: 25 %RH (With no load inside, due to environment used)
• Dehumidifying element film area: 30 x 30mm
• Power supply: AC100V 50/60 Hz 3W
• Weight: 17 kg
• Accessories: 2 pieces x 2 pieces, Key x shelf board, Digital Humidity Monitor (THA-01M), triangle Tap
$0
Mobile Unit (Ut-Lab.)

Mobile Unit (Ut-Lab.)

AS ONE Corporation

• Model number: IU-UT
• Size (mm): 410 x 470 x 600
• Weight: 13kg
• Material: Body/Steel, Top plate/wooden plywood
• Shelf board mounting pitch: 40mm
• Caster: Nylon, f38mm
• Top plate withstand load: 4kg (equal load)
• Accessories: Shelf board x 1
• UT-Lab.
• It consists of body composed of steel frames and unit that can be freely selected according to thing to be stored. It has excellent flexibility and can respond flexibly to changes in experiments and research contents.
• IU-UT?IUT-UT:Handle equipped both front and back, so possible to place both left or right.
• IUT-UT:Sliding top panel provided.
$0
Mobile Unit (Ut-Lab.)

Mobile Unit (Ut-Lab.)

AS ONE Corporation

• Model number: IUT-UT
• Size (mm): 410 x 470 x 620
• Weight: 15kg
• Material: Body/Steel, Top plate/wooden plywood
• Shelf board mounting pitch: 40mm
• Caster: Nylon, f38mm
• Top plate withstand load: 4kg (equal load)
• Top plate slide width: 260mm
• Accessories: Shelf board x 1
• UT-Lab.
• It consists of body composed of steel frames and unit that can be freely selected according to thing to be stored. It has excellent flexibility and can respond flexibly to changes in experiments and research contents.
• IU-UT?IUT-UT:Handle equipped both front and back, so possible to place both left or right.
• IUT-UT:Sliding top panel provided.
$0
Mobile Unit (Ut-Lab.)

Mobile Unit (Ut-Lab.)

AS ONE Corporation

• Model number: IU3-UT
• Size (mm): 450 x 450 x 620
• Weight: 20kg
• Material: Body/Steel, Top plate/wooden plywood
• Shelf board mounting pitch: 40mm
• Caster: Nylon, f50mm (stopper x 2 front wheels)
• Top plate withstand load: 4kg (equal load)
• Accessories: Shelf board x 1
• UT-Lab.
• It consists of body composed of steel frames and unit that can be freely selected according to thing to be stored. It has excellent flexibility and can respond flexibly to changes in experiments and research contents.
• IU-UT?IUT-UT:Handle equipped both front and back, so possible to place both left or right.
• IUT-UT:Sliding top panel provided.
$0