Pump
Siphon Pump (Colorful Pump) Light Blue
AS ONE Corporation
• Model number: BL-2 light blue
• Total length x hose length (mm): Approximately 541 x 538
• Hose outer diameter x tip diameter (mm): Approximately f20 x f15
• Material: PE (Polyethylene)
• Allowable temperature limit: Approximately 70?
• Selectable from 6 colors for identification of liquid to be used.
$0
Siphon Pump (Colorful Pump) Gray
AS ONE Corporation
• Model number: BL-2 gray
• Total length x hose length (mm): Approximately 541 x 538
• Hose outer diameter x tip diameter (mm): Approximately f20 x f15
• Material: PE (Polyethylene)
• Allowable temperature limit: Approximately 70?
• Selectable from 6 colors for identification of liquid to be used.
$0
Siphon Pump (Colorful Pump) Black
AS ONE Corporation
• Model number: BL-2 black
• Total length x hose length (mm): Approximately 541 x 538
• Hose outer diameter x tip diameter (mm): Approximately f20 x f15
• Material: PE (Polyethylene)
• Allowable temperature limit: Approximately 70?
• Selectable from 6 colors for identification of liquid to be used.
$0
Siphon Pump (Colorful Pump) Pink
AS ONE Corporation
• Color: Pink
• Total length x hose length (mm): about 541 x 538
• Hose outer diameter x tip diameter (mm): about f20 x f15
• Material : PE (Polyethylene)
• Heat-resistant temperature: about 70 ?C
• Choose from 7 colors to distinguish the liquid used.
$0
Pump Head for Tubing Pump for Micro Tube
AS ONE Corporation
• Model number: DG-1
• Pump head for micro tube
• Conform tube/1 x 1sss, 2 x 1sss, 2.4 x 0.8sss
• Maximum flow rate: 48mL/min
• Rotation speed: To 100rpm
• Material: Exterior/ABS resin, Cartridge/POM (polyacetal), Roller/stainless steel (SUS316)
• Front lab
• sss type is for micro tube pump set(FRONTLAB) and # type is for tubing pump set.
$0
Pump Head for Tubing Pump for 2 Run Type Micro Tube
AS ONE Corporation
• Model number: DG-2
• Pump head for 2 run type micro tube
• Conform tube/1 x 1sss, 2 x 1sss, 2.4 x 0.8sss
• Maximum flow rate: 48mL/min
• Rotation speed: To 100rpm
• Material: Exterior/ABS resin, Cartridge/POM (polyacetal), Roller/stainless steel (SUS316)
• Front lab
• sss type is for micro tube pump set(FRONTLAB) and # type is for tubing pump set.
$0
Pump Head for Tubing Pump Single Lever Down Type (For 1.6mm)
AS ONE Corporation
• Model number: 1515
• Single lever down type pump head (for 1.6mm)
• Conform tube/L/S13, 14, 19, 16, 25, 17, 18
• Maximum flow rate: 2200mL/min
• Rotation speed: To 600rpm
• Material: Exterior/PES (polyethersulfone), Roller/stainless steel (SUS316)
• Front lab
• sss type is for micro tube pump set(FRONTLAB) and # type is for tubing pump set.
$0
Pump Head for Tubing Pump Single Lever Down Type (For 2.4mm)
AS ONE Corporation
• Model number: 2515
• Single lever down type pump head (for 2.4mm)
• Conform tube/L/S15, 24
• Maximum flow rate: 1600mL/min
• Rotation speed: To 600rpm
• Material: Exterior/PES (polyethersulfone), Roller/stainless steel (SUS316)
• Front lab
• sss type is for micro tube pump set(FRONTLAB) and # type is for tubing pump set.
$0
Foot Switch for Tubing Pump
AS ONE Corporation
• Model number: Footswitch
• Foot switch
• Front lab
• sss type is for micro tube pump set(FRONTLAB) and # type is for tubing pump set.
$0
American Screw for Tubing Pump
AS ONE Corporation
• Model number: American screws
• 1515, 2515 American screw for fixing
• Quantity: 2 pieces
• Front lab
• sss type is for micro tube pump set(FRONTLAB) and # type is for tubing pump set.
$0
Stirring Circulation Pump (Connection: Reinforced ABS Resin)
AS ONE Corporation
• Stirring capacity: Approximately 10L/min (for water)
• Pump head: Maximum approximately 350mm (for water)
• Power supply: 100VAC 50/60Hz
• Power cord length: Approximately 1.8m (2P plug)
• External body dimension: 80 x 100 x 258mm
• Weight: 1.0kg
• Model number: FKP-0 (wetted part: Reinforced ABS resin)
• Stir the solution in a tank powerfully.
• Temperature unevenness can be prevented, if performs heating with thrown-in type heater.
• If external circulation kit(sold separately) is used together, solution can be transferred to other cooling coils, jacket, etc.
$0
External Circulation Kit for Stirring Circulation Pump
AS ONE Corporation
• Stirring capacity: Approximately 10L/min (for water)
• Pump head: Maximum approximately 350mm (for water)
• Power supply: 100VAC 50/60Hz
• Power cord length: Approximately 1.8m (2P plug)
• External circulation kit material: Brass chromium plating
• External body dimension: 80 x 100 x 258mm
• Weight: 1.0kg
• Model number: External circulation kit
• Stir the solution in a tank powerfully.
• Temperature unevenness can be prevented, if performs heating with thrown-in type heater.
• If external circulation kit(sold separately) is used together, solution can be transferred to other cooling coils, jacket, etc.
$0
Stirring Circulation Pump (Connection: Stainless)
AS ONE Corporation
• Stirring capacity: Approximately 10L/min (for water)
• Pump head: Maximum approximately 350mm (for water)
• Power supply: 100VAC 50/60Hz
• Power cord length: Approximately 1.8m (2P plug)
• External body dimension: 80 x 100 x 258mm
• Weight: 1.0kg
• Model number: FKP-1 (wetted part: Stainless)
• Stir the solution in a tank powerfully.
• Temperature unevenness can be prevented, if performs heating with thrown-in type heater.
• If external circulation kit(sold separately) is used together, solution can be transferred to other cooling coils, jacket, etc.
$0
Needle Valve Unit (For Vacuum Adjustment)
AS ONE Corporation
• Model number: PSR-01
• Valve material: Polyamide, brass
• Connection port size (mm): f8
• For vacuum adjustment
• Compactly arranged the necessity for pressure control of vacuum pump.
• It is capable of simple pressure adjustment of pump by using its open side needle valve.
• It can be used to leak between pumps after decompression completion.
$0
Mini Water Pump
AS ONE Corporation
• Model number: EWP-01
• Maximum vacuum attainment level: -20kPa or more
• Liquid junction material EPDM (ethylene propylene rubber), PBT resin
• Size: 50 x 170 x 35mm
• Pipe fittings: f5.5mm hose end
• Power supply: 100VAC, 50/60Hz 20W
• Power cord length: Approximately 2m (2P plug)
• Flow rate: 100mL/minute
• Maximum discharge pressure: 30kPa or more
• Product is self-priming pump, and does not require priming water.
• Diaphragm and valve are integrated model to realize a light and compact body.
• The separately-sold battery pack allows outdoor use.
$0
Additional Pump Head for Tubing Pump
AS ONE Corporation
• Model number: ISO-313X
• Pass liquid, slurry, and gas in fixed quantity.
• There are not grand seal and valve and there are no worries about valve leak or seal leak.
• There are no worries about adverse current in action of automatic reverse stop valve.
• With flip top system(up-and-down opening-and-closing system), exchange of tube can carry out smoothly by one-touch.
$0
Cooling Coil for Constant Temperature Water Circulator (With Window)
AS ONE Corporation
• Cooling coil (coil part: f75 x 170, ring outer diameter: f8, Stainless Steel (SUS304))
• Model number: TRW-C
• Observation door is attached forward and backward, convenient for observation of sample, and measurement.
• Thickness of frame upper part becomes 25*mm*, and visibility is improved.
• In addition to microcomputer type PID control, stirring in tub with sufficient efficiency with magnet pump realizes high temperature distribution accuracy.
• Program operation function can also perform No.-of-times setup of repeat which input of max. 8-steps is possible, and also repeats input step, and is made to operate.
$0
Lid 42c for Constant Temperature Water Circulator (With Window)
AS ONE Corporation
• Lid for 42TP type
• Material: Stainless steel (SUS304)
• Size: 389 x 377mm
• Model number: 42C
• Observation door is attached forward and backward, convenient for observation of sample, and measurement.
• Thickness of frame upper part becomes 25*mm*, and visibility is improved.
• In addition to microcomputer type PID control, stirring in tub with sufficient efficiency with magnet pump realizes high temperature distribution accuracy.
• Program operation function can also perform No.-of-times setup of repeat which input of max. 8-steps is possible, and also repeats input step, and is made to operate.
$0
Multi Air Pump for Research Suction-Discharge Convertible Type
AS ONE Corporation
• Model number: LMP-100
• Discharge air volume: 18/22L/min
• Achieving vacuum degree: 133mbar (100Torr, 13.3kPa)
• Size: 224 x 206 x 254mm
• Weight: 6.6kg
• Displacement: 18/22L/min
• Highest pressure: 6.8bar (99PSIG)
• Connection port size: 8mm
• Gas contact unit material: Aluminum, Stainless steel, Teflon
• Power supply: AC100V 50/60Hz 4.6/3.3A
• For both discharge and suction
• There is no mixing of oil with oil-free dry pump.
• Possible to use it for the suction side, equipping the water trap and pressurization side standardly with the air filter, and feeling easy.
• The regulator with gauge is equipped for suction and pressurization.
$0
Suction-Discharge Chemical-Resistant Pump
AS ONE Corporation
• Model number: PT-10
• Pump performance: 70 - 380mL/min
• Material: Pump body/PPS (polyphenylene sulfide), Pump seal section/NBR (nitrile rubber), Hose part/Silicone rubber, Hose tip/PE (polyethylene), PP (polypropylene), Exterior/stainless steel (SUS430), Tank part/HDPE (high density polyethylene)
• Size: 150 x 394 x 328mm
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Tube length: 1m
• Accessories: Plastic container
• Discharge quantity: 90 - 350mL/min
• Tank capacity: 10L
• *For replacement tank use square bottle 10, 20L.
• These products can be used for various applications such as dispensing solution inside tank and sucking liquid waste from outside.
• Liquid sending speed can be controlled easily using knob.
• Tank is replaceable, and can be disposed of instead of discharging contents using pump.
$0