Magnetic Stirrer & Hotplate Stirrer
Program Hot Plate EC1200NP
AS ONE Corporation
• Model number: EC-1200NP
• Highest temperature: 300 ?
• Plate size: 400 x 300mm
• Plate material: Aluminum
• Temperature control system: PID control with auto-tuning function
• Heater capacity: 900W
• Withstand load: Approx 10kg
• Power supply: AC100 V50/60Hz
• Power cord length: 2m (2P plug)
• Time allowed for continuous use: 48 hours (at the time of 250?)
• Variable temperature-gradient type
• It is a programmed control hot plate which can memorize 4 kinds of programs of max.16 steps.
• PID temperature control and temperature control stabilized with the SSR output are possible.
Program Hot Plate To 430?
AS ONE Corporation
• Model number: HP-2SA
• Highest temperature: 430?
• Plate size: 180 x 180mm
• Plate material: Aluminum die cast (ceramic coating)
• Main unit size: 200 x 260 x 118mm
• Operating temperature range: Room temperature +10 - 430?
• Temperature control system/sensor: Microcomputer type PID control/K thermocouple sensor
• Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit)
• Program function: 1 pattern 8 steps/temperature and time settings for each step
• Heater capacity: 1300W
• Power supply: 100VAC 50/60Hz
• Temperature distribution width: -4?
Replacement Knob Screw For Stirrer Shaft
AS ONE Corporation
• Specification: Replacement Mounting Knob Screw
Slim Stirrer Individual Rotation Control
AS ONE Corporation
• Separate rotation control
• Number of stirring: 4
• Size: 499 x 100 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSI-4
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
Slim Stirrer Individual Rotation Control
AS ONE Corporation
• Separate rotation control
• Number of stirring: 8
• Size: 499 x 190 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSI-8
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
Slim Stirrer Individual Rotation Control
AS ONE Corporation
• Separate rotation control
• Number of stirring: 12
• Size: 699 x 190 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSI-12
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
Slim Stirrer Same Rotation Control
AS ONE Corporation
• Same rotation control
• Number of stirring: 4
• Size: 499 x 100 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSS-4
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
Slim Stirrer Same Rotation Control
AS ONE Corporation
• Same rotation control
• Number of stirring: 5
• Size: 499 x 190 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSS-8
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
Stainless Stirring Rod Centrifugal Blade for Stirrer (Front Lab)
AS ONE Corporation
• Centrifugal blade
• Material: Stainless steel (400mm)
• Front lab
• Model number: FLCSI
• Starting speed of rotation is smooth, which prevents sample from spilling.
• PRO type stirs at constant rotation speed even when viscosity changes.
• Possible to operate PRO type and get data from it using personal computer(RS232)
Stainless Stirring Rod Cross Blade for Stirrer (Front Lab)
AS ONE Corporation
• Cross blade
• Material: Stainless steel (400mm)
• Front lab
• Model number: FLXSI
• Starting speed of rotation is smooth, which prevents sample from spilling.
• PRO type stirs at constant rotation speed even when viscosity changes.
• Possible to operate PRO type and get data from it using personal computer(RS232)
Stainless Stirring Rod Plate Blade for Stirrer (Front Lab)
AS ONE Corporation
• Plate blade
• Material: Stainless steel (400mm)
• Front lab
• Model number: FLPSI
• Starting speed of rotation is smooth, which prevents sample from spilling.
• PRO type stirs at constant rotation speed even when viscosity changes.
• Possible to operate PRO type and get data from it using personal computer(RS232)
Stainless Stirring Rod Straight Blade for Stirrer (Front Lab)
AS ONE Corporation
• Straight blade
• Material: Stainless steel (400mm)
• Front lab
• Model number: FLSSI
• Starting speed of rotation is smooth, which prevents sample from spilling.
• PRO type stirs at constant rotation speed even when viscosity changes.
• Possible to operate PRO type and get data from it using personal computer(RS232)
Stirrer for Jungle
AS ONE Corporation
• Stirrer body
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Material: Stirrer exterior/PP (polypropylene), Top board, support/stainless steel (SUS304)
• Size: Stirrer part/100 x 135 x 30mm, Mounting arm/f8 x 215mm
• Cord length: 1m (f2.5mm mini plug attached)
• Weight: 480g
• Model number: S-1A
• *CS-1, CS-4, and holder are not included in the package.
• The remote controller can be put on the desk, and improves the operability.
• The controller gives 4 outputs, and allows connection of up to 4 stirrers.
Stirring Duckboard for Bath Stirrer
AS ONE Corporation
• main body material: stainless steel (SUS304 430) and others
• Magnet: Samakova magnet
• Recommended agitator size: 25 ? f8 mm, 30 ? f8 mm
• Leg 4 pieces Standard Dimensions: f 128 mm
• Environmental resistance: In water and oil
• Available temperature range: 5 to 200 ? C
• Weight: 0.2 kg
• Accessory: Hex wrench
• duckboard Dimensions (mm): 160 x 46.5
• The foot of pitch Dimensions (mm): f 102 to f 154
• * It is also possible to combine the bus stirrer and the duckboard (Please be careful of combinations.)
• * The adaptive bus star is water tank inner diameter f 180 mm or more
• * Recommended water bus stirrer (2-7940-31), oil bus stirrer (2-7939-21)
• model number: agitation duckboard
Support Rod (f16 x 450mm), for VOLTEGA Power Stirrer
AS ONE Corporation
• Model number: Support rod (f16 x 450mm)
• Main unit size (mm): Support rod (f16 x 450mm)
• Top board size (mm): Support rod (f16 x 450mm)
• Insulation board is placed on stainless steel top plate, which enables stirring while oil bath is placed on it.
• With strong magnet and induction motor, possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, it can be used as stand.
Support Rod for Stirrer
AS ONE Corporation
• Model number: Support rod (f6 x 350mm)
Support Rod for Stirrer
AS ONE Corporation
• Model number: Support rod (f6 x 350mm)
Test Tube Mixer TRIO
AS ONE Corporation
• Model number: HM-1N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Flat attachment x 1 piece, attachment base x 1 piece
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).
Test Tube Mixer TRIO
AS ONE Corporation
• Model number: HM-2N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Flat attachment x 1 piece, attachment base x 1 piece
• Rotation speed display: LED 10 steps
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).
Test Tube Mixer TRIO (Many Attachments)
AS ONE Corporation
• Model number: HM-1FN
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotation speed feedback system
• Function: Switch type for automatic (touch) start, continuous operation
• Motor: High rotation DC brush motor
• Motor output: Approx 18W
• Power supply: 100 - 240VAC 50/60Hz (including AC adapter)
• Material: Aluminum die cast
• Size: 125 x 155 x 100mm
• Weight: 2.3kg
• Accessories: Single/flat/tube attachment x 1 piece each, attachment/microplate/stirrer base x 1 piece each
• High Type
• Control Panel : English
• Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• Possible to choose 2-types of operation mode(touch mode, continuous operation mode).
• TM-2N?2FN?HM-2N?2FN:Strength of shaking and rotation speed can be checked by LED bar graph.
• By attaching stirrer base, Usable as stirrer that is capable of stirring up to 2000*ml*(Max. speed 1500rpm).