Digital Dry Desiccator (S-Series)


• External dimensions (mm): 600 x 659 x 1800
• Internal dimensions (mm): 540 x 600 x 1510
• ?* Wooden packaging (wooden frame, pallet, etc.) is used.
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolysis dehumidifier (Rosal ?)
• Dehumidification capacity (at 30% RH): 12 hours or less
• ?* This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60% RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60% RH
• Humidity control range: 25% RH to room temperature
• ?* These figures are for reference only when there is no internal load and the outdoor environment is 25 degrees C and 60% RH (they vary depending on outdoor air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60% RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 49 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 degrees C (25 degrees C to 40 degrees C)/+/- 5% RH (15 ~ 40% RH at 25 degrees C)
• ?* The humidity indicator is LL when the humidity is less than 10%. If it exceeds 60% RH, the humidity indicator will be HH.
• Display resolution: 1 deg. C/1% RH
• Sampling interval: 0.5 sec
• Material: Body/Control Unit/Steel Plate, Front Window/Tempered Glass
• Shelf board dimensions: 536 x 600 mm
• Shelf mounting pitch (minimum shelf spacing): 60 mm (40 mm)
• Shelf Board Specifications: Steel Plate
• Shelf load capacity: approx. 40kg/sheet (at uniform load)
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60Hz
• Power consumption: about 34W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers)
• Weight: 70kg
• Accessories: 4 steel shelves

Cheapest shipping from $0
SKU: 4-748-01
MPN: 4-748-01
GTIN: NULL
Stock Status: 1,000 pcs
Delivery Status: 1-3 days
$0
pcs

Description


• External dimensions (mm): 600 x 659 x 1800
• Internal dimensions (mm): 540 x 600 x 1510
• ?* Wooden packaging (wooden frame, pallet, etc.) is used.
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolysis dehumidifier (Rosal ?)
• Dehumidification capacity (at 30% RH): 12 hours or less
• ?* This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60% RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60% RH
• Humidity control range: 25% RH to room temperature
• ?* These figures are for reference only when there is no internal load and the outdoor environment is 25 degrees C and 60% RH (they vary depending on outdoor air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60% RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 49 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 degrees C (25 degrees C to 40 degrees C)/+/- 5% RH (15 ~ 40% RH at 25 degrees C)
• ?* The humidity indicator is LL when the humidity is less than 10%. If it exceeds 60% RH, the humidity indicator will be HH.
• Display resolution: 1 deg. C/1% RH
• Sampling interval: 0.5 sec
• Material: Body/Control Unit/Steel Plate, Front Window/Tempered Glass
• Shelf board dimensions: 536 x 600 mm
• Shelf mounting pitch (minimum shelf spacing): 60 mm (40 mm)
• Shelf Board Specifications: Steel Plate
• Shelf load capacity: approx. 40kg/sheet (at uniform load)
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60Hz
• Power consumption: about 34W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers)
• Weight: 70kg
• Accessories: 4 steel shelves

Similar Products

Digital Dry Desiccator (S-Series)

Digital Dry Desiccator (S-Series)

AS ONE Corporation

• External dimensions (mm): 900 x 459 x 900
• Internal dimensions (mm): 840 x 400 x 760
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolysis dehumidifier (Rosal ?)
• Dehumidification capacity (at 30% RH): 12 hours or less
• ?* This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60% RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60% RH
• Humidity control range: 25% RH to room temperature
• ?* These figures are for reference only when there is no internal load and the outdoor environment is 25 degrees C and 60% RH (they vary depending on outdoor air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60% RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 49 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 degrees C (25 degrees C to 40 degrees C)/+/- 5% RH (15 ~ 40% RH at 25 degrees C)
• ?* The humidity indicator is LL when the humidity is less than 10%. If it exceeds 60% RH, the humidity indicator will be HH.
• Display resolution: 1 deg. C/1% RH
• Sampling interval: 0.5 sec
• Material: Body/Control Unit/Steel Plate, Front Window/Tempered Glass
• Shelf board dimensions: 856 x 400 mm
• Shelf mounting pitch (minimum shelf spacing): 30 mm (10 mm)
• Shelf Board Specifications: Steel Plate
• Shelf load capacity: approx. 40kg/sheet (at uniform load)
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60Hz
• Power consumption: about 34 W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers) * Rubber feet
• Weight: 50kg
• Accessories: 3 steel shelves
$0
Digital Dry Desiccator (S-Series)

Digital Dry Desiccator (S-Series)

AS ONE Corporation

• External dimensions (mm): 1200 x 659 x 1800
• Internal dimensions (mm): 1140 x 600 x 1510
• ?* Wooden packaging (wooden frame, pallet, etc.) is used.
• Dehumidification method: H2O electrolysis discharge by solid polymer electrolysis dehumidifier (Rosal ?)
• Dehumidification capacity (at 30% RH): 18 hours or less
• ?* This is a reference from when the room is open to air with no internal load and an outdoor environment of 25 degrees Celsius and 60% RH (it varies depending on the outside air conditions).
• Humidity setting range: 10 ~ 60% RH
• Humidity control range: 25% RH to room temperature
• ?* These figures are for reference only when there is no internal load and the outdoor environment is 25 degrees C and 60% RH (they vary depending on outdoor air conditions).
• Measuring range: 0 ~ 60 degrees C/10 ~ 60% RH
• Temperature/humidity sensor: Temperature/thermistor element, humidity/resistance type sensor for low humidity measurement
• Dehumidifying element area: approximately 98 cm 2
• Humidity control system: microcomputer ON/OFF control
• Temperature and humidity display accuracy: +/- 1 degrees C (25 degrees C to 40 degrees C)/+/- 5% RH (15 ~ 40% RH at 25 degrees C)
• ?* The humidity indicator is LL when the humidity is less than 10%. If it exceeds 60% RH, the humidity indicator will be HH.
• Display resolution: 1 deg. C/1% RH
• Sampling interval: 0.5 sec
• Material: Body/Control Unit/Steel Plate, Front Window/Tempered Glass
• Shelf board dimensions: 1136 x 600 mm
• Shelf mounting pitch (minimum shelf spacing): 60 mm (40 mm)
• Shelf Board Specifications: Steel Plate
• Shelf load capacity: approx. 40kg/sheet (at uniform load)
• Safety device: Individual operation malfunction error display function of solid polymer electrolytic dehumidifier (when short-circuit or disconnection), overcurrent fuse
• Power supply: AC100V 50/60Hz
• Power consumption: about 63 W
• Power cord length: approx. 2 m (3P plug/body grounded)
• Caster: 100 mm in diameter, made of hard rubber (with 2 stoppers)
• Weight: 115kg
• Accessories: 4 steel shelves
$0
Desiccator

Desiccator

AS ONE Corporation
• Auto dry type
• Material: ABS resin molding
• Power supply: AC100~240V 50/60Hz
• Power consumption: 3W
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Humidity control range: 25%RH (with no internal load, depending on the usage environment)
• Shelf board interval: Shelf rest 5 stages, shelf pitch 70mm
• Weight: 3.9kg
• Accessories: Shelf board x 2
• Model number: SD-3
• Outer dimension (mm): 310 x 359 x 450
• Inner dimension (mm): 300 x 300 x 440
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
$0
Auto Dry Desiccator 330 x 345 x 525mm

Auto Dry Desiccator 330 x 345 x 525mm

AS ONE Corporation
• Auto dry type
• Material: Transparent PMMA (acrylic)
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)
• Dehumidifying element membrane area: 30 x 30mm
• Power supply: AC100-240V 50/60Hz
• Power consumption: 3W
• Shelf board interval: 1 stage in the bottom/50mm, Other/30mm
• Weight: 5kg
• Power cord length: 2m (2P plug)
• Accessories: Shelf board x 3, Low humidity digital thermo-hygrometer (THI-HP), silica gel plate x 1
• Model number: OH-3S
• Outer dimension (mm) *: 330 x 345 x 525 (*including dehumidifying unit. )
• Inner dimension (mm): 285 x 275 x 485
• Country of origin: JAPAN
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
$0
Auto Dry Desiccator 530 x 345 x 335mm

Auto Dry Desiccator 530 x 345 x 335mm

AS ONE Corporation
• Auto dry type
• Material: Transparent PMMA (acrylic)
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)
• Dehumidifying element membrane area: 30 x 30mm
• Power supply: AC100-240V 50/60Hz
• Power consumption: 3W
• Shelf board interval: 1 stage in the bottom/50mm, Other/30mm
• Weight: 5.4kg
• Power cord length: 2m (2P plug)
• Accessories: Shelf board x 2, Low humidity digital thermo-hygrometer (THI-HP), silica gel plate x 1
• Model number: OL-3S
• Outer dimension (mm) *: 530 x 345 x 335 (*including dehumidifying unit. )
• Inner dimension (mm): 485 x 275 x 285
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
$0