Stainless Steel Tank

Stainless Steel Tank
[Global Model] EC Water Bath Analog 220V?10%

[Global Model] EC Water Bath Analog 220V?10%

AS ONE Corporation
• Analog
• temperature settings range: R.T. + 5 ? C to 95 ? C
• tank inner size: f 208 x 123 mm
• external dimension: 220 x 278 x 124 mm
• Temperature control method: microcomputer proportional control
• Temperature sensor: Temperature sensor (Pt 100 O)
• material: Control section cover / PP (polypropylene), water tank / stainless (SUS304), heater / stainless (SUS304) nickel plating, duckboard / aluminum
• Heater capacity: 750 W
• Safety device: Circuit breaker bimetal thermostat
• power supply: 220V?10%
• Weight: About 1.5 kg
• Country of origin: Japan
• Control Panel : English
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
[Global Model] High Power Cleaner 230V

[Global Model] High Power Cleaner 230V

AS ONE Corporation
• Suitable foe cleaning: Dust?Liquids?oil?metal swarf
• Type: Universal type
• Tank: Pail PC set
• Tank capacity (L): Liquid/8, Dust/12
• Size (mm): 336 x 336 x 682
• Suction Air volume: 2.6m3/min
• Maximum vacuum pressure: 30kPa
• Power supply: Single phase 230V / cord length/8m
• Power consumption: 1100W
• Noise level: 75dB
• Weight: 13.0kg
• Accessories: f38 GLMM hose 2m, Resin straight pipe x 2 pieces, f38-25 T-type nozzle, f8-20 strainer nozzle, f38 gap nozzle large, Nozzle with step
• Model number: SGV-110A-PC
[Global Model] High Power Cleaner 230V

[Global Model] High Power Cleaner 230V

AS ONE Corporation
• Suitable foe cleaning: Dust and powder
• Type: Only for dry type
• Tank: Pail PC set
• Tank capacity (L): 12
• Size (mm): 336 x 336 x 682
• Suction Air volume: 2.5m3/min
• Maximum vacuum pressure: 30kPa
• Power supply: Single phase 230V / cord length/8m
• Power consumption: 1100W
• Noise level: 75dB
• Weight: 14.5kg
• Accessories: f38 hose with antistatic ground 2m, f38 aluminum straight pipe x 1 piece, f38-25 T-type nozzle, f38 gap nozzle large
• Model number: SGV-110DP-PC
[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

AS ONE Corporation
• Dehumidification and humidity adjustment: automatic adjustment by dehumidifier and digital controller
• Hygrometer monitor accuracy: ? 3 ~ 4.5% RH
• Power supply 220 VAC
• Cabinet Material: Steel (Powder coating, grey)
• Door: Steel, Glass, Magnet Packing
• hygrometer: digital hygrometer
• Shelf Board Load Capacity: 50 kg/Sheet
• External Dimensions: W 440 x D 491 x H 988 (mm)
• Internal Dimensions: W 438 x D 390 x H 855 (mm)
• Usable Internal Capacity: 145 L
• Product weight: 26 kg
• Power consumption: 0 ~ 3.6 W (up to 120 W)
• Accessories: Shelf x 3, Key x 2
• Dry cavities do not have functions such as heating (raising the temperature) or cooling (lowering the temperature) in the cabinet.
• The maximum power consumption is displayed only at the moment of startup.
[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

AS ONE Corporation
• Dehumidification and humidity adjustment: automatic adjustment by dehumidifier and digital controller
• Hygrometer monitor accuracy: ? 3 ~ 4.5% RH
• Power supply 220 VAC
• Cabinet Material: Steel (Powder coating, grey)
• Door: Steel, Glass, Magnet Packing
• hygrometer: digital hygrometer
• Shelf Board Load Capacity: 50 kg/Sheet
• External Dimensions: W 880 x D 491 x H 988 (mm)
• Internal Dimensions: W 878 x D 390 x H 855 (mm)
• Usable Internal Capacity: 291 L
• Product weight: 52 kg
• Power consumption: 0 ~ 7.2 W (up to 240 W)
• Accessories: Shelf x 3, Key x 2
• Dry cavities do not have functions such as heating (raising the temperature) or cooling (lowering the temperature) in the cabinet.
• The maximum power consumption is displayed only at the moment of startup.
[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

AS ONE Corporation
• Dehumidification and humidity adjustment: automatic adjustment by dehumidifier and digital controller
• Hygrometer monitor accuracy: ? 3 ~ 4.5% RH
• Power supply 220 VAC
• Cabinet Material: Steel (Powder coating, grey)
• Door: Steel, Glass, Magnet Packing
• hygrometer: digital hygrometer
• Shelf Board Load Capacity: 50 kg/Sheet
• External Dimensions: W 880 x D 748 x H 988 (mm)
• Internal Dimensions: W 878 x D 650 x H 855 (mm)
• Usable Internal Capacity: 485 L
• Product weight: 68 kg
• Power consumption: 0 ~ 10.8 W (up to 360 W)
• Accessories: Shelf x 3, Key x 2
• Dry cavities do not have functions such as heating (raising the temperature) or cooling (lowering the temperature) in the cabinet.
• The maximum power consumption is displayed only at the moment of startup.
[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

AS ONE Corporation
• Dehumidification and humidity adjustment: automatic adjustment by dehumidifier and digital controller
• Hygrometer monitor accuracy: ? 3 ~ 4.5% RH
• Power supply 220 VAC
• Cabinet Material: Steel (Powder coating, Silver)
• Door: Steel, Glass, Magnet Packing
• hygrometer: digital hygrometer
• Shelf Board Load Capacity: 100 kg/Sheet
• External Dimensions: W 1200 x D 748 x H 1855 (mm)
• Internal Dimensions: W 1198 x D 650 x H 1620 (mm)
• Usable Internal Capacity: 1261 L
• Product weight: 220 kg
• Power consumption: 0 ~ 21.6 W (up to 720 W)
• Accessories: Shelf x 5, Key x 2, Horizontalizer
• Dry cavities do not have functions such as heating (raising the temperature) or cooling (lowering the temperature) in the cabinet.
• The maximum power consumption is displayed only at the moment of startup.
[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

[Global Model] WET-CABI Constant Moisture Tank (50 ~ 75% RH) Humidification Type WET Series

AS ONE Corporation
• Dehumidification and humidity adjustment: automatic adjustment by dehumidifier and digital controller
• Hygrometer monitor accuracy: ? 3 ~ 4.5% RH
• Power supply 220 VAC
• Cabinet Material: Steel (Powder coating, Silver)
• Door: Steel, Glass, Magnet Packing
• hygrometer: digital hygrometer
• Shelf Board Load Capacity: 100 kg/Sheet
• External Dimensions: W 1200 x D 748 x H 1845 (mm)
• Internal Dimensions: W 1198 x D 650 x H 1620 (mm)
• Usable Internal Capacity: 1261 L
• Product weight: 220 kg
• Power consumption: 0 ~ 21.6 W (up to 720 W)
• Accessories: Shelf x 5, Key x 2, Horizontalizer
• Dry cavities do not have functions such as heating (raising the temperature) or cooling (lowering the temperature) in the cabinet.
• The maximum power consumption is displayed only at the moment of startup.
Analog EC Water Bath Stirrer

Analog EC Water Bath Stirrer

AS ONE Corporation

• Analog
• Temperature settings range: Room temperature +5 - 95?
• Temperature control system: Microcomputer type proportional control
• Rotation speed setting range: 100 - 1500rpm
• Weight: Approx 3.3kg
• Temperature sensor: Resistance thermometer (Pt100O)
• Motor: AC motor
• Material: Body/Noryl resin (R), Tank/Stainless steel (SUS304), Heater/Stainless steel (SUS304) nickel plating
• Heater capacity: 750W
• Safety device: Temperature excessive rise prevention device, overcurrent prevention fuse
• Power supply: 100VAC, 50/60Hz, 800W (cord length 2m, 3P plug)
• Accessories: Stir bar (f8 x 30mm) x 1 pc
• External dimensions: 240 x 280 x 220mm
• Chamber dimensions (mm): f208 x 123
• *When samples are stirred directly, use containers of f110mm or less instead of the duckboard.
• Model number: EWS-100R
• By feedback control of microcomputer-style, stable control of rotation speed is available.
• Body is made of engineer plastic(Noryl resin*R*), and body is excellent in strength, heat resistance, chemical resistance.
• Possible to operate temperature and revolution speed independently, setting is easy.
• When temperature exceeds, switch is turned off by compulsion and error messages are displayed.
Beads Bath Cool & Warm

Beads Bath Cool & Warm

AS ONE Corporation

• Specification: Cool & Warm
• Outer dimensions: 335 x 241 x 266mm
• Tank inner dimensions: 300 x 150 x 150mm
• Main Weight: about 9.0kg
• Heat-cooled ability: 2 Peltier units 76W
• Temperature control method: PID control
• Temperature sensor: K class thermocouple
• Temperature settings range (?C) : R.T. -20 to 60 (? Not below 0 ?C)
• Material : Body/SPCC , water tank/Lid/Stainless steel (SUS304)
• Load tolerance: 8kg
• Power supply: AC100V 50/60Hz with 3P plug
• Power consumption: about 250W
• Safety function: Overcurrent protection fuse, manual return type bimetal
• *This machine is for beads, so you cannot put liquid in water tank.
Constant-Low-Temperature Water Circulator (Peltier Type) 1.5L

Constant-Low-Temperature Water Circulator (Peltier Type) 1.5L

AS ONE Corporation

• temperature settings range: 4 to 65 ? C
• Size: 305 x 280 x 235 mm
• tank inner size (Top): 160 x 170 x 70 mm
• Minimum set temperature unit: 0.1 ? C
• Temperature adjustment accuracy: ? 1.0 ? C
• Temperature control method: PID control and digital display
• Heat cooling system: heating and cooling by Peltier element
• Circulation Method: Agitation by electromagnetic pumps
• Safety device: Overcurrent fuse
• capacity: about 1.5 L
• material: water tank / stainless steel (SUS304), main body / steel powder coating
• power supply: AC100V, 50 / 60Hz, 1.1 A
• power cord: 2 m (3P Plug)
• Weight: 9 kg
• * If R.T. 25 ? C is set at 5 ? C or below, it is recommended that the R.T. be below 20 ? C
• Model Number: CTB-1
• Electronic cooling method adopting peltier elements realizes clean cooling and heating.
• Delicate temperature control is enabled for both heating and cooling.
Constant-Low-Temperature Water Circulator (Peltier Type) 3.0L

Constant-Low-Temperature Water Circulator (Peltier Type) 3.0L

AS ONE Corporation

• temperature settings range: 4 to 65 ? C
• Size: 435 x 280 x 235 mm
• tank inner size (Top): 230 x 150 x 80 mm
• Minimum set temperature unit: 0.1 ? C
• Temperature adjustment accuracy: ? 1.0 ? C
• Temperature control method: PID control and digital display
• Heat cooling system: heating and cooling by Peltier element
• Circulation Method: Agitation by electromagnetic pumps
• Safety device: Overcurrent fuse
• capacity: about 3.0 L
• material: water tank / stainless steel (SUS304), main body / steel powder coating
• power supply: AC100V, 50 / 60Hz, 2.1 A
• power cord: 2 m (3P Plug)
• Weight: 13 kg
• * If R.T. 25 ? C is set at 5 ? C or below, it is recommended that the R.T. be below 20 ? C
• Model Number: CTB-2
• Electronic cooling method adopting peltier elements realizes clean cooling and heating.
• Delicate temperature control is enabled for both heating and cooling.
Cool Incubator

Cool Incubator

AS ONE Corporation

• Model number: KMH-050
• External dimensions: 483 x 487 (554) x 690mm *Size including projections is described in ().
• Internal dimensions: 400 x 335 x 370mm
• Temperature settings range: -15 to +50?
• Refrigerant: HFC-134a (CFC regulation supported)
• Program operation: 8 steps 2 patterns continuous repeat (1 step 0 - 99 hours, memory backup approximately 48 hours)
• Temperature accuracy: Freezer ON/OFF control/+/-1.5? (5.0? without any load), Heater proportion control/?0.5? (37? without any load)
• Temperature distribution width: +/- 0.5? (at 37.0? without any load)
• Capacity: 50L
• Power supply: Single phase 100V 50/60Hz 10A
• Power cord length: 3m
• Weight: 40kg
• Material: Exterior/steel acrylic baking finish, Interior/stainless steel (NSSC180)
• Accessories: Shelf board x 2 sheets, Shading plate, Rubber leg
• Drainage and cleaning processings(drain outlet?drainage tank, etc.) are not required.
• Informing by buzzer and digital display in case of temperature.
• Measurement holes are provided in the cabinet(?it is not attached to KMH-050)..
Digital EC Water Bath Stirrer

Digital EC Water Bath Stirrer

AS ONE Corporation

• Digital
• Temperature settings range: Room temperature +5 - 95? (0.1? unit)
• Temperature control system: Microcomputer type PID control (2 steps)
• Display precision: +/- 0.5%rdg or +/- 1? (larger one) +/- 1dgt
• Rotation speed setting range: 100 - 1500rpm (10rpm unit)
• Weight: Approx 3.4kg
• Temperature sensor: Resistance thermometer (Pt100O)
• Motor: AC motor
• Material: Body/Noryl resin (R), Tank/Stainless steel (SUS304), Heater/Stainless steel (SUS304) nickel plating
• Heater capacity: 750W
• Safety device: Temperature excessive rise prevention device, overcurrent prevention fuse
• Power supply: 100VAC, 50/60Hz, 800W (cord length 2m, 3P plug)
• Accessories: Stir bar (f8 x 30mm) x 1 pc
• External dimensions: 240 x 280 x 220mm
• Chamber dimensions (mm): f208 x 123
• *When samples are stirred directly, use containers of f110mm or less instead of the duckboard.
• Model number: EWS-100RD
• By feedback control of microcomputer-style, stable control of rotation speed is available.
• Body is made of engineer plastic(Noryl resin*R*), and body is excellent in strength, heat resistance, chemical resistance.
• Possible to operate temperature and revolution speed independently, setting is easy.
• When temperature exceeds, switch is turned off by compulsion and error messages are displayed.
EC Oil Bath

EC Oil Bath

AS ONE Corporation

• Model number: EO-200RD
• Temperature settings range: Room temperature +5? - 180?
• Digital
• Temperature sensor: Resistance thermometer (Pt100O)
• Material: Control unit cover/PP (Polypropylene), Water tank/Stainless steel (SUS304), Heater/Stainless steel (SUS304) nickel plating
• Heater capacity: 750W
• Power supply: 100VAC 50/60Hz
• Weight: Approx 1.5kg
• Safety device: Circuit breaker, bimetal thermostat
• External dimensions: 220 x 275 x 124mm
• Chamber dimensions: f208 x 123mm
• Temperature control system: Microcomputer type PID control
• Display precision: +/- 0.5%rdg or +/- 1? (larger one) +/- 1dgt
• Timer: ON/OFF, set time (0 - 99 hours 59 minutes)
• Water tank shape: Round
• Control cover is made of PP, excellent in chemical resistance.
• When temperature exceeds, heater switch is turned off by compulsion and error messages are displayed.
EC Oil Bath

EC Oil Bath

AS ONE Corporation

• Model number: EO-200KD
• Temperature settings range: Room temperature +5? - 180?
• Digital
• Temperature sensor: Resistance thermometer (Pt100O)
• Material: Control unit cover/PP (Polypropylene), Water tank/Stainless steel (SUS304), Heater/Stainless steel (SUS304) nickel plating
• Heater capacity: 750W
• Power supply: 100VAC 50/60Hz
• Weight: Approx 1.5kg
• Safety device: Circuit breaker, bimetal thermostat
• External dimensions: 210 x 274 x 124mm
• Chamber dimensions: 200 x 123mm
• Temperature control system: Microcomputer type PID control
• Display precision: +/- 0.5%rdg or +/- 1? (larger one) +/- 1dgt
• Timer: ON/OFF, set time (0 - 99 hours 59 minutes)
• Water tank shape: Square
• Control cover is made of PP, excellent in chemical resistance.
• When temperature exceeds, heater switch is turned off by compulsion and error messages are displayed.
EC Oil Bath

EC Oil Bath

AS ONE Corporation

• Model number: EO-200R
• Temperature settings range: Room temperature +5? - 180?
• Analog
• Temperature sensor: Resistance thermometer (Pt100O)
• Material: Control unit cover/PP (Polypropylene), Water tank/Stainless steel (SUS304), Heater/Stainless steel (SUS304) nickel plating
• Heater capacity: 750W
• Power supply: 100VAC 50/60Hz
• Weight: Approx 1.5kg
• Safety device: Circuit breaker, bimetal thermostat
• External dimensions: 220 x 278 x 124mm
• Chamber dimensions: f208 x 123mm
• Temperature control system: Microcomputer type proportional control
• Water tank shape: Round
• Control cover is made of PP, excellent in chemical resistance.
• When temperature exceeds, heater switch is turned off by compulsion and error messages are displayed.