Rubber Stopper
Desiccator
AS ONE Corporation
• Silica gel type
• Material: Body, door/PMMA (acrylic), Door packing/latex sponge + neoprene rubber coating, Drawer/PS (polystyrene)
• Dehumidification system: Silica gel method
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)
• Internal dimensions of drawers: 113 x 494 x 68mm
• Shelf board interval: 85mm
• Shelf board load capacity: Approx 1.5kg
• Total withstand load: Approx 6kg
• Door specification: Draw latch 3 places
• Rubber foot: 25 x 20mm
• Weight: 9kg
• Size: 270 x 568 x 419mm (*The size excludes projections and dry unit. )
• Accessories: Drawer x 8 pieces, Middle partition plate x 8 sheets, Silica gel plate x 2 plates
• 8 drawers are useful for classification and storage of long or small amounts of samples.
• Transparent body and drawers facilitate confirmation of stored samples.
• Door and snap locks achieve high airtightness.
Desiccator
AS ONE Corporation
• Auto dry type
• Material: Body, door/PMMA (acrylic), Door packing/latex sponge + neoprene rubber coating, Drawer/PS (polystyrene)
• Dehumidification system: H2O electric decomposition discharge (using solid high polymer electrolyte membrane)
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)
• Internal dimensions of drawers: 113 x 494 x 68mm
• Shelf board interval: 85mm
• Shelf board load capacity: Approx 1.5kg
• Total withstand load: Approx 6kg
• Door specification: Draw latch 3 places
• Rubber foot: 25 x 20mm
• Power supply: AC100-240V 50/60Hz 3W
• Power cord length: 2m (2P plug)
• Weight: 9.5kg
• Model number: OH-PB
• Auto dry type
• Size (mm): 270 x 568 x 419 (*The size excludes projections, dry unit. )
• UT-Lab.
• Accessories: Drawer x 8 pieces, Middle partition plate x 8 sheets, Analog type temperature and humidity meter x 1
• Control Panel : N/A
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
• 8 drawers are useful for classification and storage of long or small amounts of samples.
• Transparent body and drawers facilitate confirmation of stored samples.
• Door and snap locks achieve high airtightness.
Desiccator (For Silica Gel) 1200 x 550 x 1652mm
AS ONE Corporation
• Material: Body/steel plate melamine bake coating, Front/glass
• Caster: F100mm hard rubber (with stopper x 2 pieces)
• Weight: 90kg
• Shelf board load capacity: Approximately 40kg/sheet (uniform distribution load)
• Shelf board mounting pitch: 60mm
• Number of attached shelf boards: 3 sheets
• Outer dimensions: 1200 x 550 x 1652mm
• Inner dimension: 1160 x 515 x 1515mm
• Caster: There
• *Silica gel plate is not included in the package.
• Model number: SPX-4
• Made of teel with silica gel formula.
• Left door adopts latch-type lock on top and bottom and right door adopts general rotary key.
Desiccator (For Silica Gel) 600 x 550 x 1700mm
AS ONE Corporation
• Material: Body/steel plate melamine bake coating, Front/glass
• Caster: F100mm hard rubber (with stopper x 2 pieces)
• Weight: 54kg
• Shelf board load capacity: Approximately 40kg/sheet (uniform distribution load)
• Shelf board mounting pitch: 60mm
• Number of attached shelf boards: 3 sheets
• Outer dimensions: 600 x 550 x 1700mm
• Inner dimension: 560 x 515 x 1515mm
• Caster: There
• *Silica gel plate is not included in the package.
• Model number: SPX-3
• Made of teel with silica gel formula.
• Left door adopts latch-type lock on top and bottom and right door adopts general rotary key.
Desiccator (Shading Type) 300 x 345 x 535mm
AS ONE Corporation
• Material: Body/shading PVC (vinyl chloride resin), Shelf board/PS (polystyrene), Rubber foot/natural rubber
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: Approx 10kg
• Shelf board mounting pitch: 1 stage in the bottom/50mm, Other/30mm (minimum shelf board spacing 20mm)
• Shelf board dimensions: 257 x 270 x 4mm
• Weight: 4.5kg (including shelf board)
• Accessories: Shelf board/3 board, Silica gel plate x 1 plate
• Outer dimensions: 300 x 345 x 525mm
• Inner dimension: 285 x 275 x 485mm
• Model number: LH-SK
• Suitable for storing light-sensitive samples because 5 sides are made of light-blocking materials.
Desiccator (Shading Type) 500 x 345 x 335mm
AS ONE Corporation
• Material: Body/shading PVC (vinyl chloride resin), Shelf board/PS (polystyrene), Rubber foot/natural rubber
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: Approx 10kg
• Shelf board mounting pitch: 1 stage in the bottom/50mm, Other/30mm (minimum shelf board spacing 20mm)
• Shelf board dimensions: 456 x 270 x 5mm
• Weight: 4.85kg (including shelf board)
• Accessories: Shelf board x 2, Silica gel plate x 1 plate
• Outer dimensions: 500 x 345 x 335mm
• Inner dimension: 485 x 275 x 285mm
• Model number: LL-SK
• Suitable for storing light-sensitive samples because 5 sides are made of light-blocking materials.
Desiccator 300 x 345 x 525mm
AS ONE Corporation
• Material: Body/transparent PMMA (acrylic), Shelf board/PS (polystyrene), Rubber foot/natural rubber
• Frontage size: 258 x 458mm
• Shelf board dimensions: 257 x 270 x 4mm
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: 10kg
• Shelf board mounting pitch: 1 stage in the bottom/50mm, Other/30mm (minimum shelf board spacing 20mm)
• Weight (including shelf board): 4.5kg
• Accessories: Shelf board x 3, silica gel plate x 1
• Outer dimensions: 300 x 345 x 525mm
• Inner dimension: 285 x 275 x 485mm
• Model number: LH
• Frontage size: 258 x 458mm
• Shelf board dimensions: 257 x 270 x 4mm
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: 10kg
• Shelf board mounting pitch: 1 stage in the bottom/50mm, Other/30mm (minimum shelf board spacing 20mm)
• Weight (including shelf board): 4.5kg
• Accessories: Shelf board x 3, silica gel plate x 1
• Outer dimensions: 300 x 345 x 525mm
• Inner dimension: 285 x 275 x 485mm
• Model number: LH
Desiccator 500 x 345 x 335mm
AS ONE Corporation
• Material: Body/transparent PMMA (acrylic), Shelf board/PS (polystyrene), Rubber foot/natural rubber
• Frontage size: 258 x 458mm
• Shelf board dimensions: 456 x 270 x 5mm
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: 10kg
• Shelf board mounting pitch: 1 stage in the bottom/50mm, Other/30mm (minimum shelf board spacing 20mm)
• Weight (including shelf board): 3.3kg
• Accessories: Shelf board x 2, silica gel plate x 1
• Outer dimensions: 500 x 345 x 335mm
• Inner dimension: 485 x 275 x 285mm
• Model number: LL
• Frontage size: 258 x 458mm
• Shelf board dimensions: 456 x 270 x 5mm
• Shelf board load capacity: Approximately 2kg/board
• Total withstand load: 10kg
• Shelf board mounting pitch: 1 stage in the bottom/50mm, Other/30mm (minimum shelf board spacing 20mm)
• Weight (including shelf board): 3.3kg
• Accessories: Shelf board x 2, silica gel plate x 1
• Outer dimensions: 500 x 345 x 335mm
• Inner dimension: 485 x 275 x 285mm
• Model number: LL
Digital Orbital Shaker
AS ONE Corporation
• Extracorporeal Dimensions (mm): 314 x 310 x 197
• inner size shaking table (mm): 279 x 279
• Material: Main unit/ABS Plastic, shaking table/aluminum
• Speed: 20 to 300rpm (1rpm unit)
• Swivel width: 19mm
• Timer setting: 0 to 74 hours (Per minute), continuous Operation
• Load: 4.5kg
• System requirements: 2 to 40 ?C, 20 to 80 %RH (non-condensing)
• Power supply: AC100 to 240 V 50/60Hz
• Weight: 10kg
• DC brushless motor
• Accessories: shaking table x 1 piece, Nonslip rubber mat x 1 piece, divider rubber cord x 8 pieces, power supply adapter x 1 piece, power supply conversion plug (4 kinds)
• inner size shaking table (mm): 279 x 279
• Material: Main unit/ABS Plastic, shaking table/aluminum
• Speed: 20 to 300rpm (1rpm unit)
• Swivel width: 19mm
• Timer setting: 0 to 74 hours (Per minute), continuous Operation
• Load: 4.5kg
• System requirements: 2 to 40 ?C, 20 to 80 %RH (non-condensing)
• Power supply: AC100 to 240 V 50/60Hz
• Weight: 10kg
• DC brushless motor
• Accessories: shaking table x 1 piece, Nonslip rubber mat x 1 piece, divider rubber cord x 8 pieces, power supply adapter x 1 piece, power supply conversion plug (4 kinds)
Digital Orbital Shaker
AS ONE Corporation
• Extracorporeal Dimensions (mm): 314 x 310 x 197
• inner size shaking table (mm): 279 x 279
• Material: Main unit/ABS Plastic, shaking table/aluminum
• Speed: 20 to 300rpm (1rpm unit)
• Swivel width: 19mm
• Timer setting: 0 to 74 hours (Per minute), continuous Operation
• Load: 4.5kg
• System requirements: 2 to 40 ?C, 20 to 80 %RH (non-condensing)
• Power supply: AC100 to 240 V 50/60Hz
• Weight: 10kg
• DC brushless motor
• Accessories: shaking table x 1 piece, Nonslip rubber mat x 1 piece, divider rubber cord x 8 pieces, power supply adapter x 1 piece, power supply conversion plug (4 kinds)
Double Balloon Rubber
AS ONE Corporation
• Model number: No.6
• Tube diameter: Outer diameter/f7mm, Inner diameter/f5mm
• Material: Natural rubber (latex)
• Tube diameter: Outer diameter/f7mm, Inner diameter/f5mm
• Material: Natural rubber (latex)
Double Balloon Rubber
AS ONE Corporation
• Model number: No.8
• Tube diameter: Outer diameter/f7mm, Inner diameter/f5mm
• Material: Natural rubber (latex)
• Tube diameter: Outer diameter/f7mm, Inner diameter/f5mm
• Material: Natural rubber (latex)
Dropper (Silicone Rubber) For
AS ONE Corporation
• Type number: For 5 mL
• Hole diameter: f 6.7 mm
• Total length: 63 mm
• Made of silicone rubber
• * Prices per 1 piece.
• Hole diameter: f 6.7 mm
• Total length: 63 mm
• Made of silicone rubber
• * Prices per 1 piece.
Earplug (Flange Type)
AS ONE Corporation
• Model number: EP-531
• Quantity: 1 set (2 pieces)
• material: Synthetic rubber
• Quantity entered: 100 pairs
• * Price per set.
• These plugs are flange type and superior in fitting property.
Fluorine Rubber Packing (For AVO)
AS ONE Corporation
• Applicable model: AVO-200
• Material: Fluorine rubber
• *When replacing the packing, scrape off the bonding marks (sticking) of the packing on the metal surface with a cutter, and then apply the adhesive thinly.
• *Use KE45T100 (61-2816-48) as the adhesive. (It can be used for both of silicone rubber type and fluorine rubber type.)
• Replacement door packing for vacuum dryer (AVO series).
• Can be firmly fixed with the dedicated fixing bracket.
Fluorine Rubber Packing (For AVO)
AS ONE Corporation
• Applicable model: AVO-250/DVS-250
• Material: Fluorine rubber
• *When replacing the packing, scrape off the bonding marks (sticking) of the packing on the metal surface with a cutter, and then apply the adhesive thinly.
• *Use KE45T100 (61-2816-48) as the adhesive. (It can be used for both of silicone rubber type and fluorine rubber type.)
• Replacement door packing for vacuum dryer (AVO series).
• Can be firmly fixed with the dedicated fixing bracket.
Fluorine Rubber Packing (For AVO)
AS ONE Corporation
• Applicable model: AVO-310/DVS-310
• Material: Fluorine rubber
• *When replacing the packing, scrape off the bonding marks (sticking) of the packing on the metal surface with a cutter, and then apply the adhesive thinly.
• *Use KE45T100 (61-2816-48) as the adhesive. (It can be used for both of silicone rubber type and fluorine rubber type.)
• Replacement door packing for vacuum dryer (AVO series).
• Can be firmly fixed with the dedicated fixing bracket.
Frame for Fume Hood 1000 x 700 x 800mm
AS ONE Corporation
• Material: Top plate/wooden plywood double-sided melamine bonded (soft-edged winding), Leg/25 square steel pipe melamine baking coating
• Caster: f65mm made of rubber with stopper (2 pieces)
• Model number: DLK-900
• Adaptive model: DL-900
• Size (mm): 1000 x 700 x 800
• Weight (kg): 19
Frame for Fume Hood 800 x 700 x 800mm
AS ONE Corporation
• Material: Top plate/wooden plywood double-sided melamine bonded (soft-edged winding), Leg/25 square steel pipe melamine baking coating
• Caster: f65mm made of rubber with stopper (2 pieces)
• Model number: DLK-600
• Adaptive model: DL-600
• Size (mm): 800 x 700 x 800
• Weight (kg): 17
Gap Wagon 750 x 250 x 800mm
AS ONE Corporation
• Material: Stainless steel (*stainless steel material that is magnetic and has characteristics equivalent to SUS304. )
• Caster: f50mm made of rubber (with diagonal stopper)
• Withstand load: Approximately 20kg/shelf
• Shelf spacing: 320mm
• Foot pipe diameter: f25mm
• Size (mm): 750 x 250 x 800
• Weight (kg): 8
• Model number: B
• Space, which can not be used before, is usable by these products.
• Excellent in durability, chemical and corrosion resistance.