AS ONE Corporation

Cool Plate Aluminum Beads, Big (2L)
AS ONE Corporation
• Model number: Aluminum beads, large (2L)
• Size (mm): Approx f10
$0

Cool Plate Aluminum Beads, Small (2L)
AS ONE Corporation
• Model number: Aluminum beads, small (2L)
• Size (mm): Approx f4
$0

Hot Plate 600 (Chemical Resistant Top Board) 150 x 150mm
AS ONE Corporation
• Model number: HPR6-1515
• Highest temperature (?): 600
• Plate size (mm): 150 x 150
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)
• Plate material: Stainless steel (SUS304) + ceramic coating
• Size: 335 x 225 x 121mm
• Heater capacity: Sheathed heater 1350W
• Temperature controller: PID control
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Safety device: Overcurrent protection, excessive temperature rise prevention
• Power supply: 100VAC 50/60Hz
• Power cord: 2.5m, 3P plug with an earth
• Weight: 6.6kg
• Withstand load: 5kg
• *If you hit sharp metal on top board, coating will be peeled and get cracked to expose internal metal and it can cause corrosion. Please be careful.
• *If you hit sharp metal on top board, coating will be peeled and get cracked to expose internal metal and it can cause corrosion. Please be careful.
• Max. Temperature 600? Achieved 600? which has been long awaited 2-sizes available 2-sizes are provided according to the work area and work size.
• Top plate is provided with ceramic coating with improved chemical resistance.
• Top plate is not be cracked in any event because it is made of annealed SUS304.
• To prevent overheat, manual reset bimetal switch is adopted.
• Sheath heater is adopted which enables heating to high temperatures.
$0

Hot Plate 600 (Chemical Resistant Top Board) 300 x 300mm
AS ONE Corporation
• Model number: HPR6-3030
• Highest temperature (?): 600
• Plate size (mm): 300 x 300
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)
• Plate material: Stainless steel (SUS304) + ceramic coating
• Size: 485 x 375 x 125mm
• Heater capacity: Sheathed heater 4800W
• Temperature controller: PID control
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)
• Safety device: Overcurrent protection, excessive temperature rise prevention
• Power supply: Single phase 200V 50/60Hz
• Power cord: 2.5m, Plug shape (put outlet 2i.eps)
• Weight: 21kg
• Withstand load: 10kg
• *If you hit sharp metal on top board, coating will be peeled and get cracked to expose internal metal and it can cause corrosion. Please be careful.
• *30A of power supply is required.
• *If you hit sharp metal on top board, coating will be peeled and get cracked to expose internal metal and it can cause corrosion. Please be careful.
• *30A of power supply is required.
• Max. Temperature 600? Achieved 600? which has been long awaited 2-sizes available 2-sizes are provided according to the work area and work size.
• Top plate is provided with ceramic coating with improved chemical resistance.
• Top plate is not be cracked in any event because it is made of annealed SUS304.
• To prevent overheat, manual reset bimetal switch is adopted.
• Sheath heater is adopted which enables heating to high temperatures.
$0

VOLTEGA Power Stirrer (Bakelite Top Plate) 160 x 160mm
AS ONE Corporation
• Model number: VPS-160BD
• Main unit size (mm): 160 x 160 (171) x 111
• Top board size (mm): 160 x 160
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 160 x 160mm
• Rotation speed: 60 - 1350rpm
• Motor: 3W
• Stirred capacity: 10L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 20/25W
• Main unit size: 160 x 160 (171) x 111mm (Size including projections is described in ())
• Weight: 2.2/2.4kg
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0

VOLTEGA Power Stirrer (Bakelite Top Plate) 200 x 200mm
AS ONE Corporation
• Model number: VPS-200BD
• Main unit size (mm): 200 x 200 (211) x 130
• Top board size (mm): 200 x 200
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 200 x 200mm
• Rotation speed: 60 - 1350rpm
• Motor: 15W
• Stirred capacity: 20L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 40/45W
• Main unit size: 200 x 200 (211) x 130mm (Size including projections is described in ())
• Weight: 3.9/4.1kg
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0

VOLTEGA Power Stirrer (Bakelite Top Plate) 300 x 300mm
AS ONE Corporation
• Model number: VPS-300BD
• Main unit size (mm): 300 x 300 (310) x 165
• Top board size (mm): 300 x 300
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board material: Phenol Resin
• Top board size: 300 x 300mm
• Rotation speed: 60 - 1350rpm
• Motor: 40W
• Stirred capacity: 70L
• Magnet/strength (T): Neodymium/0.46
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 70/75W
• Main unit size: 300 x 300 (310) x 165mm (Size including projections is described in ())
• Weight: 8.8/9.2kg
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0

VOLTEGA Power Stirrer (Stainless Steel Top Plate) 160 x 160mm
AS ONE Corporation
• Model number: VPS-160SD
• Main unit size (mm): 160 x 160 (171) x 111
• Top board size (mm): 160 x 160
• Material: SPCC (acrylic coating), Top board/Stainless Steel (SUS304)
• Motor: Induction motor
• Top board material: Stainless Steel (SUS304)
• Top board size: 160 x 160mm
• Rotation speed: 60 - 1350rpm
• Motor: 3W
• Stirred capacity: 10L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 20/25W
• Main unit size: 160 x 160 (171) x 111mm (Size including projections is described in ())
• Weight: 2.3/2.5kg
• *Demonstration equipment 3-6758-03 is available.
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0

VOLTEGA Power Stirrer (Stainless Steel Top Plate) 200 x 200mm
AS ONE Corporation
• Model number: VPS-200SD
• Main unit size (mm): 200 x 200 (211) x 130
• Top board size (mm): 200 x 200
• Material: SPCC (acrylic coating), Top board/Stainless Steel (SUS304)
• Motor: Induction motor
• Top board material: Stainless Steel (SUS304)
• Top board size: 200 x 200mm
• Rotation speed: 60 - 1350rpm
• Motor: 15W
• Stirred capacity: 20L
• Magnet/strength (T): Neodymium/0.42
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 40/45W
• Main unit size: 200 x 200 (211) x 130mm (Size including projections is described in ())
• Weight: 4.1/4.3kg
• *Demonstration equipment 3-6758-03 is available.
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0

VOLTEGA Power Stirrer (Stainless Steel Top Plate) 300 x 300mm
AS ONE Corporation
• Model number: VPS-300SD
• Main unit size (mm): 300 x 300 (310) x 165
• Top board size (mm): 300 x 300
• Material: SPCC (acrylic coating), Top board/Stainless Steel (SUS304)
• Motor: Induction motor
• Top board material: Stainless Steel (SUS304)
• Top board size: 300 x 300mm
• Rotation speed: 60 - 1350rpm
• Motor: 40W
• Stirred capacity: 70L
• Magnet/strength (T): Neodymium/0.46
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Maximum power consumption: 70/75W
• Main unit size: 300 x 300 (310) x 165mm (Size including projections is described in ())
• Weight: 9.7/10.1kg
• *Demonstration equipment 3-6758-03 is available.
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• By powerful magnet and induction motors, can be stirring of high viscosity and large capacity.
• By feedback control with tacho generator, possible to obtain stable rotation from low speed to high speed.
• Achieve stable rotation even at low speed range.
• Possible to set rotation speed that is proportional to memory by analog knob.
• Support rod options are available for all models.
• Possible to choose top plate material depending on intended use.
• Bakelite top board is excellent in oil resistance and acid resistance.
• Stainless steel top plate is excellent in chemical resistance and corrosion resistance.
$0

VOLTEGA Power Stirrer (3 Tandem Type) 450 x 111mm
AS ONE Corporation
• Model number: VPS-150S3
• Main unit size (mm): 450 x 150 x 111
• Top board size (mm): 450 x 111
• Material: Body/SPCC (acrylic coating), Top board/stainless steel (SUS304)
• Motor: Induction motor
• Top board material: Stainless steel (SUS304)
• Top board size: 450 x 150mm
• Rotation speed: 60 - 1350rpm
• Motor: 3 x 3W
• Stirred capacity: 10L x 3
• Magnet/strength (T): Neodymium/0.42 x 3
• Power supply: AC100V 50/60Hz, 2.5m 3P plug (with 2P conversion adapter)
• Heater capacity: -
• Maximum power consumption: 60W
• Main unit size: 450 x 150 (161) x 111mm (() shows dimensions including protrusion)
• Weight: 5.7kg
• *Stirring capacity and recommended stirring bars are indicated when the target is water.
• *The size of the stirring bar to be used varies depending on the capacity and the viscosity. Use properly depending on the purpose.
• With strong magnet and induction motor, possible to stir stirring bar that is apart from top plate. (Ex.11:approx.30*mm* in 500*ml* round-bottom flask/using football-shaped stirring bar)
• Possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set rotation speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, possible to used as stand.
$0

Fittings for Support Rod, for VOLTEGA Power Stirrer
AS ONE Corporation
• Model number: Fittings for support rod
• Insulation board is placed on stainless steel top plate, which enables stirring while oil bath is placed on it.
• With strong magnet and induction motor, possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, it can be used as stand.
$0

Support Rod (f16 x 450mm), for VOLTEGA Power Stirrer
AS ONE Corporation
• Model number: Support rod (f16 x 450mm)
• Main unit size (mm): Support rod (f16 x 450mm)
• Top board size (mm): Support rod (f16 x 450mm)
• Insulation board is placed on stainless steel top plate, which enables stirring while oil bath is placed on it.
• With strong magnet and induction motor, possible to stir high viscosity and large capacity liquid.
• Feedback control by tacho generator, provides stable rotation from low speed to high speed.
• It provides stable rotation even in low rotation speed range.
• Adjustment dial is analog type that can set speed in proportion to dial scale.
• Dedicated fixing bracket can be attached on the back side, and by combining with support rod, it can be used as stand.
$0

Water Tank for Observation, Acrylic Thin Type Approximately 0.45L
AS ONE Corporation
• Model number: Thin type (150 x 30)
• Capacity (L): Approx 0.45
• Outer dimension (mm): 150 x 30 x 150
• Body material: PMMA (Acrylic)
• Plate thickness: 3mm
• Water resistant temperature: 50?
• Weight: Approx 200g
• Flat and easy-to-carry aquarium that allows to observe samples without damaging them.
• Made of high transparent acrylic board.
• Usable not only for underwater observation but for observation of insects or underground observation.
$0

Water Tank for Observation, Acrylic Thin Type Approximately 0.6L
AS ONE Corporation
• Model number: Thin type (150 x 40)
• Capacity (L): Approx 0.6
• Outer dimension (mm): 150 x 40 x 150
• Body material: PMMA (Acrylic)
• Plate thickness: 3mm
• Water resistant temperature: 50?
• Weight: Approx 220g
• Flat and easy-to-carry aquarium that allows to observe samples without damaging them.
• Made of high transparent acrylic board.
• Usable not only for underwater observation but for observation of insects or underground observation.
$0

Water Tank for Observation, Acrylic Thin Type Approximately 0.65L
AS ONE Corporation
• Model number: Thin type (180 x 30)
• Capacity (L): Approx 0.65
• Outer dimension (mm): 180 x 30 x 180
• Body material: PMMA (Acrylic)
• Plate thickness: 3mm
• Water resistant temperature: 50?
• Weight: Approx 280g
• Flat and easy-to-carry aquarium that allows to observe samples without damaging them.
• Made of high transparent acrylic board.
• Usable not only for underwater observation but for observation of insects or underground observation.
$0

Water Tank for Observation, Acrylic Thin Type Approximately 0.92L
AS ONE Corporation
• Model number: Thin type (180 x 40)
• Capacity (L): Approx 0.92
• Outer dimension (mm): 180 x 40 x 180
• Body material: PMMA (Acrylic)
• Plate thickness: 3mm
• Water resistant temperature: 50?
• Weight: Approx 300g
• Flat and easy-to-carry aquarium that allows to observe samples without damaging them.
• Made of high transparent acrylic board.
• Usable not only for underwater observation but for observation of insects or underground observation.
$0

Release Handle for Press Machine
AS ONE Corporation
• Model number: AJRH1
• Material: Nickel plating steel
• Ensures smooth pressure reduction through the rotation of the release handle inserted to the release valve.
$0

Lab Shaker Wide (40mm Type) Shaking Method/Round-Trip
AS ONE Corporation
• Model number: SR-5
• Product name: Body
• Specification: Shaking method/round-trip
• Shaking speed: 20 - 180rpm
• Motor: DC brushless motor 36W
• Timer: Wind-up type maximum 60 minutes (continuous operation available)
• Power supply: AC100V, 50/60Hz, 5A
• Power cord length: 2.5m (with 3P plug, 2P - 3P conversion adapter)
• Exterior material: Steel
• Size: 391 x 396 x 140mm
• Shaking width: 40mm
• Shaking platform size: 350 x 300mm
• Withstand load: 5kg or less
• Weight: Approx 17kg
•
• Flask holder/all-purpose shaker table(sold separately) can be replaced easily without any tool.
•
• Possible to used for 2 types of erlenmeyer flasks by moving clamp lugs.
•
• Bracket for spring net attachment has mounting holes at intervals of 10*mm* so that spring net height can be set to 70, 60, 50, or 40*mm*.
•
• Top plate is provided with rubber sheet for slip prevention.
$0

Lab Jack Holder 170 x 170 x 61mm 1 Set ( + Fixture)
AS ONE Corporation
• Model number: LJH-150
• Size (mm): 170 x 170 x 61
• Supported top board (mm): 150 x 150
• Quantity: 1 expression (Body + Fixture)
• main body material: stainless steel (SUS304)
• Main accessories: L shaped metal bracket x 4 pieces, Knurling 5 pieces, spring (S 130 x 2 pieces)
• * Please note that this product has a spring structure with compression due to pressurization
• * It can be attached to a flat plate top board lab jack.
• Possible to customized with 4 types of spring length(optional).
• Mounting location of spring can be changed, preventing beakers and Erlenmeyer flasks on jack from falling.
• Several holes of L-shaped mounting fixture allows you to change mounting location of spring to make fine adjustment of spring force.
• Adding optional spring enables product to be used for various purposes such as fixing of round-bottom flasks and ensuring of stronger fixing.
$0