AS ONE Corporation
Exhaust Fan Option Filter Unit
AS ONE Corporation
<br>
• Model number: HEPA filter unit<br>
• With HEPA filter<br>
• Activated charcoal, dust removal filter unit<br>
• *It cannot be used for L type. <br>
• Exhaust fan parts available for both portable fume hoods and draft benches.
$0
Exhaust Fan Option (Activated Carbon Dust Filter Unit) HEPA Filter Unit
AS ONE Corporation
<br>
• Applicable model: Model M<br>
• Specification: HEPA with filter<br>
• Remove small particles (0.3 ?m and above)
$0
Exhaust Fan Option (Activated Carbon Dust Filter Unit) HEPA Filter Replacement
AS ONE Corporation
<br>
• Specification: Replacement HEPA Filters<br>
• Applicable model: Model M
$0
Exhaust Fan Option (Activated Carbon Dust Filter Unit) HEPA Filter Unit
AS ONE Corporation
<br>
• Applicable model: L<br>
• Specification: HEPA with filter<br>
• Remove small particles (0.3 ?m and above)
$0
Exhaust Fan Option (Activated Carbon Dust Filter Unit) HEPA Filter Replacement
AS ONE Corporation
<br>
• Specification: Replacement HEPA Filters<br>
• Applicable model: L
$0
Exhaust Fan Option (Activated Carbon Dust Filter Unit) Activated Carbon Unit Acid Resistant Type
AS ONE Corporation
<br>
• Applicable model : L type (acid resistant type)<br>
• Specification: Acidic gas activated carbon (3kg) included<br>
• Exterior material: PVC<br>
• Weight : 6.4 kg (including activated carbon)<br>
• Static pressure (indication): about 300 Pa
$0
Exhaust Fan Option (Activated Carbon Dust Filter Unit) Dust Filter Unit Acid Resistant Type
AS ONE Corporation
<br>
• Applicable model : L type (acid resistant type)<br>
• Specification: Medium Performance with filter<br>
• Remove relatively large particles (10 ?m and above) and dust<br>
• Exterior material: PVC<br>
• Filter material: Polyester nonwoven fabric<br>
• Weight: 0.6 kg<br>
• Static pressure (indication): approx. 120 to 150 Pa
$0
Exhaust Fan Option (Activated Carbon Dust Filter Unit) Dust Filter Acid Resistant Type Replacement
AS ONE Corporation
<br>
• Type: Replacement dust filter, acid proof type<br>
• Applicable model : L type (acid resistant type)<br>
• Specification: Medium Performance
$0
Compact Draft
AS ONE Corporation
<br>
• main body material: stainless steel (SUS304)<br>
• power supply: AC100V 50 / 60Hz<br>
• Maximum Power Consumption: 110/130 W (50 / 60Hz)<br>
• air volume: approx. 4 m
3 / min (Door 1/3 open, 0.5 m/s face speed without load) * It may vary depending on the working environment<br>
• Lighting: fluorescent lamps (10 W) 1 piece<br>
• Sash opening surface: 620 x 575 mm<br>
• External Dimensions: With standard fan / 700 x 555 x 920/1090 mm with M-type fan / 700 x 555 x 920/1160 mm<br>
• Available inner size: Plumbing / 474 x 498 mm with no plumbing / 698 x 498 mm<br>
• Weight: CD7S-F, IN, FX, INX / 40.5 kg, CD7S-N, NX / 34.5 kg, CD7S-MF, MFX / 43.0 kg, cart / 6.4 kg<br>
• Type accessory with fan: 1 fan unit, 1 duct hose (f 100 mm x 2.5 m)<br>
• Type accessories with plumbing: 1 drain hose (1 m), 1 hose nipple (outer diameter f 16 mm)<br>
• Fan specification: No fan<br>
• Water supply / drainage:<br>
• Model number: CD7S-N<br>
• * Please contact your facility group for an application for local exhaust equipment<br>
• ?<<Contact Us>> AS ONE Corporation Facilities Group ? TEL : 0120-500-558 ? Fax : 0120-500-483 ? Email : setsubi@so.as-1.co.jp ? TEL Reception Time / 9 : 00 to 5 : 30 (Excluding soil, days and holidays) <br>
• Air volume control type can adjust in 3-steps(strong?medium?weak) of exhaust air volume. <br>
• Balance-weight type front door can be stopped in arbitrary position. <br>
• Activated carbon unit(sold separately) can be attached. <br>
• Dedicated cart(sold separately) is offered as option to facilitate installation and movement.
$0
Compact Draft
AS ONE Corporation
<br>
• main body material: stainless steel (SUS304)<br>
• power supply: AC100V 50 / 60Hz<br>
• Maximum Power Consumption: 110/130 W (50 / 60Hz)<br>
• air volume: approx. 4 m
3 / min (Door 1/3 open, 0.5 m/s face speed without load) * It may vary depending on the working environment<br>
• Lighting: fluorescent lamps (10 W) 1 piece<br>
• Sash opening surface: 620 x 575 mm<br>
• External Dimensions: With standard fan / 700 x 555 x 920/1090 mm with M-type fan / 700 x 555 x 920/1160 mm<br>
• Available inner size: Plumbing / 474 x 498 mm with no plumbing / 698 x 498 mm<br>
• Weight: CD7S-F, IN, FX, INX / 40.5 kg, CD7S-N, NX / 34.5 kg, CD7S-MF, MFX / 43.0 kg, cart / 6.4 kg<br>
• Type accessory with fan: 1 fan unit, 1 duct hose (f 100 mm x 2.5 m)<br>
• Type accessories with plumbing: 1 drain hose (1 m), 1 hose nipple (outer diameter f 16 mm)<br>
• Fan specification: No fan<br>
• Plumbing: None<br>
• Model number: CD7S-NX<br>
• * Please contact your facility group for an application for local exhaust equipment<br>
• ?<<Contact Us>> AS ONE Corporation Facilities Group ? TEL : 0120-500-558 ? Fax : 0120-500-483 ? Email : setsubi@so.as-1.co.jp ? TEL Reception Time / 9 : 00 to 5 : 30 (Excluding soil, days and holidays) <br>
• Air volume control type can adjust in 3-steps(strong?medium?weak) of exhaust air volume. <br>
• Balance-weight type front door can be stopped in arbitrary position. <br>
• Activated carbon unit(sold separately) can be attached. <br>
• Dedicated cart(sold separately) is offered as option to facilitate installation and movement.
$0
Handy Carry Type
AS ONE Corporation
<br>
• Material: Top plate/melamine plywood Shelf/Stainless steel (SUS304)<br>
• Tray Internal dimensions: 606 x 396 x 20mm<br>
• Withstand load: Top board/20kg, Shelf/20kg (total withstand load about 40kg)<br>
• Caster: f65mm made of rubber (antistatic type, with stopper x 2 pieces)<br>
• Knockdown<br>
• Model number: ST-3<br>
• Size (mm): 650 x 440 x 935<br>
• Weight (kg): 13.7 <br>
• Top plate can use as unit researching base and lower steps as tray of medicine or accessories (fall prevention frame equipped). <br>
• Shelf board can be used as tray, because it can remove freely
$0
Compact Draft
AS ONE Corporation
<br>
• Material: Body / PVC (vinyl chloride Plastic), Door / Transparent PVC (vinyl chloride Plastic)<br>
• external dimension: 800 x 550 x 1770 mm (Include fan units)<br>
• Sash opening: 720 x 580 mm<br>
• Weight: About 43 kg<br>
• Sink size: 700 x 370 x 100 mm<br>
• power supply: AC100V 50 / 60Hz<br>
• Interior lighting: fluorescent lamps (10 W) x 1 piece<br>
• Maximum Power Consumption: 100/120 W (50 / 60Hz)<br>
• air volume: approx. 5 m
3 / min (Door 1/3 open, 0.5 m/s face speed without load) ? The exhaust adjustment function is set at strong setting ? It may change depending on the working environment<br>
• Water supply: Rc 1/2 (f 16 mm step drill with a connecting port on the back of the draft)<br>
• Wastewater: f 18 mm step drill (With a drainage hose 1 m)<br>
• Configuration: Draft main body only<br>
• Model number: HF -800 DXN body<br>
• PVC<br>
• air volume (m3/min): 3.4 / 3.9<br>
• Static pressure (kPa): 0.36 / 0.5<br>
• Power Consumption (W): 93/110<br>
• * Shipping, carrying, installation and assembly costs are required separately. Please contact us<br>
• * Please contact your facility group for an application for local exhaust equipment<br>
• ?30 (Excluding soil, days and holidays) <<Contact Us>> AS ONE to Co. 0120-500-558, 0120-500-483 Ltd setsubi@so.as-1.co.jp<br>
• * A dedicated cart (Sales 3 -4056 ? 04) is easy to install and move. <br>
• HF-800DXNA can adjust quantity of exhaust to 3-steps(strong?middle?weak). <br>
• Reducing fan noise and suppressing power consumption in accordance with using situation. <br>
• Used instrument can be washed efficiently by wide sink. <br>
• Activated carbon unit(sold separately) can be attached by single touch.
$0
Piping Parts Round Hood
AS ONE Corporation
<br>
• Material: PVC (vinyl chloride resin)<br>
• Connection port size: f75mm<br>
• Model number: Round hood<br>
• Size (mm): f300 x 50
$0
Piping Parts Square Hood
AS ONE Corporation
<br>
• Material: PVC (vinyl chloride resin)<br>
• Connection port size: f75mm<br>
• Model number: Square hood<br>
• Size (mm): 300 x 350 x 90
$0
Piping Parts Hood
AS ONE Corporation
<br>
• Material: PVC (vinyl chloride resin)<br>
• Connection port size: f75mm<br>
• Model number: PVC hood<br>
• Size (mm): 300 x 150 x 300
$0
Piping Part 2 Duct (Intermediate Type) f50mm
AS ONE Corporation
<br>
• Specification: f50mm<br>
• Material: PVC
$0
Piping Part 2 Duct (Intermediate Type) f100mm
AS ONE Corporation
<br>
• Specification: f100mm<br>
• Material: PVC
$0
Piping Part 2 Duct (Direct Type) f50mm
AS ONE Corporation
<br>
• Specification: f50mm<br>
• Material: PVC
$0
Piping Part 2 Duct (Direct Type) f100mm
AS ONE Corporation
<br>
• Specification: f100mm<br>
• Material: PVC
$0
Portable Fume Hood Table Hood
AS ONE Corporation
<br>
• Material: PVC (vinyl chloride resin)<br>
• Weight: 7.0kg<br>
• Duct connection section: f75mm<br>
• Model number: Table hood<br>
• Main unit size (mm): 600 x 400 x 640
$0