AS ONE Corporation
Incubator (Programmed, Air Jacket Natural Convection ) 27L
AS ONE Corporation
<br>
• Model number: EIP-300V<br>
• Capacity (L): 27<br>
• Temperature range: Room temperature +5 - 80?<br>
• Convective system: Natural convection air jacket<br>
• Temperature adjustment range: Room temperature +5 - 80?<br>
• Temperature distribution width: 2? (at 37?)<br>
• Temperature control system: PID control, SSR output<br>
• Additional function: 8 steps 4 patterns of program function<br>
• Safety device: Independent excessive temperature rise prevention device (operation temperature digital settings available), overcurrent breaker, burnout mechanism (heater is OFF when sensor is disconnected)<br>
• Heater capacity: 200W<br>
• Temperature sensor: Platinum resistance thermometer Pt 100O<br>
• Excessive rise prevention sensor: K thermocouple<br>
• Chamber capacity: 27L<br>
• Shelf pitch, number of steps: 35mm pitch, 7 steps<br>
• Exterior/interior: Steel powder coating/stainless steel (SUS304)<br>
• Inner door material: Strengthened glass<br>
• Exhaust opening: f32mm x 1 piece<br>
• Weight: Approx 30kg<br>
• Power supply: 100VAC 50/60Hz cord length 2m 3P plug<br>
• Shelf board load capacity: 15kg<br>
• Accessories: Shelf board x 2 sheets, shelf board rail x 2 sets <br>
• Provided with independent overheat protector with digital temperature setting function as standard, improving safety further. <br>
• Adopts color LCD excellent in visibility leading to improved operability. <br>
• Adopts PV?SV dual display method for easy confirmation of measured values and set values as well as temperature display for overheat protection. <br>
• Provides 4-types of timer functions(ON?OFF?ON/OFF?SV start) as standard. User can select optimum timer according to amount/dimensions of sample. <br>
• Provides uniform and stable temperature environment by natural convection air jacket method and thus prevents samples from drying. <br>
• Inner door is double door made of clear material. User can observe samples inside without opening inner door. <br>
• Temperature is controlled by PID control that ensures high accuracy and stable temperature control. <br>
• Provided with key lock for improved security.
$0
Constant-Temperature Drying Oven (Timer, Natural Convection) 27L
AS ONE Corporation
<br>
• Model number: EO-300 V<br>
• capacity: 27<br>
• Temperature control range: R.T. + 20 to 300 ? C<br>
• Maximum temperature arrival time: about 60 minutes<br>
• Temperature distribution width: 25 ? C (at 300 ? C)<br>
• Temperature control system: PID control and SSR output<br>
• Additional function: Timer natural convection type ? Timer (ON timer, OFF timer, SV start / OFF timer) and Air Jacket natural convection type<br>
• Safety device: Independent overrise prevention device (Operating temperature digital setting) and overcurrent breaker burnout mechanism (heater off when sensor disconnects)<br>
• Heater capacity: 1000 W<br>
• Temperature sensor / overheating prevention sensor: K class thermocouple<br>
• inner size: 300 x 300 x 300 mm<br>
• Shelf pitch number of step: 35 mm 7 stages<br>
• Exterior / Interior: Steel powder coating / stainless steel (SUS304)<br>
• Outlet: f 32 mm x 2 pieces<br>
• external dimension: 400 x 410 x 630 mm<br>
• Weight: About 30 kg<br>
• power supply: AC100V 50 / 60Hz code length 2 m (3P Plug)<br>
• rated current: 10.5 A<br>
• shelf board Load tolerance: 15 kg<br>
• Accessories: 2 shelf board 2 pieces shelf board rails <br>
• Adopts color LCD excellent in visibility leading to improved operability. <br>
• Adopts PV?SV dual display methodfor easy confirmation of measured values and set values as well as temperature display for overheat protection. <br>
• Provides 4-types of timer functions(ON?OFF?ON/OFF?SV start) as standard. User can select optimum timer according to amount/dimensions of sample. <br>
• Adopts natural convection method that causes no scattering even when powders or light matters are put in chamber. <br>
• Temperature is controlled by PID control that ensures high accuracy and stable temperature control. <br>
• Provided with key lock for improved security.
$0
Constant-Temperature Drying Oven (Timer, Natural Convection) 91L
AS ONE Corporation
<br>
• Model number: EO-450 V<br>
• capacity: 91<br>
• Temperature control range: R.T. + 20 to 300 ? C<br>
• Maximum temperature arrival time: about 60 minutes<br>
• Temperature distribution width: 25 ? C (at 300 ? C)<br>
• Temperature control system: PID control and SSR output<br>
• Addition function: program function with timer program function, natural convection type ? timer (ON timer, OFF timer, SV start / OFF timer) program, air jacket natural convection type ? 8 step 4 pattern<br>
• Safety device: Independent overrise prevention device (Operating temperature digital setting) and overcurrent breaker burnout mechanism (heater off when sensor disconnects)<br>
• Heater capacity: 1400 W<br>
• Temperature sensor / overheating prevention sensor: K class thermocouple<br>
• inner size: 450 x 430 x 450 mm<br>
• pitch, number of step: 35 mm, 11<br>
• Exterior / Interior: Steel powder coating / stainless steel (SUS304)<br>
• Outlet: f 32 mm x 2 pieces<br>
• external dimension: 550 x 540 x 785 mm<br>
• Weight: About 40 kg<br>
• power supply: AC100V 50 / 60Hz code length 2 m (3P Plug)<br>
• rated current: 14.5 A<br>
• shelf board Load tolerance: 5 kg<br>
• Accessories: 2 shelf board 2 pieces shelf board rails <br>
• Adopts color LCD excellent in visibility leading to improved operability. <br>
• Adopts PV?SV dual display methodfor easy confirmation of measured values and set values as well as temperature display for overheat protection. <br>
• Provides 4-types of timer functions(ON?OFF?ON/OFF?SV start) as standard. User can select optimum timer according to amount/dimensions of sample. <br>
• Adopts natural convection method that causes no scattering even when powders or light matters are put in chamber. <br>
• Temperature is controlled by PID control that ensures high accuracy and stable temperature control. <br>
• Provided with key lock for improved security.
$0
Multi Air Station Suction-Discharge Convertible Type MAS-01
AS ONE Corporation
<br>
• Model number: MAS-1<br>
• Vacuum attainment level: -75kPa<br>
• Highest exhaust Pressure forces: 0.2MPa<br>
• Intake gas flow rate 12L/min<br>
• Exhaust gas flow rate 12L/min<br>
• Connection port size: f7.5mm (Made of metal)<br>
• Power supply: AC100V 50/60Hz 0.8A<br>
• Gas contact unit material: Silicone, PA (Nylon), PTFE (4 Ethylene fluoride), brass Ni Plating<br>
• For both discharge and suction<br>
• Size: 195 x 112 x 195mm <br>
• It is convenient for carrying around and compact design and with handles. <br>
• It is dry air pump that is oil-free. <br>
• Pressure and suction in one is possible.
$0
Aspirator Vacuum Depressurization Regulating Valve
AS ONE Corporation
<br>
• Model number: Decompression regulating valve with Vacuum gauge<br>
• Decompression regulating valve with Vacuum gauge <br>
• It is possible to vacuum easily just switching the botton by self-sufficient system. <br>
• It is excels in chemical resistance and durability. <br>
• Since it is with drain cock, drainage is easy. <br>
• By using regulating valve with a vacuum gauge(option), to adjust the degree of vacuum is possible. <br>
• It uses metal aspirator, displacement is stable.
$0
Asnol Sterilization Petri Dish f90 x 15mm 10 Pieces x 50 Pack
AS ONE Corporation
<br>
• Model number: GD90-15<br>
• EOG sterilization<br>
• Material: PS (polystyrene)<br>
• Thickness: 0.8mm<br>
• With slip resistance rib<br>
• With bottom 4 division point<br>
• Diameter x height: f90 x 15mm<br>
• Quantity: 1 box (10 sheets/bag x 50 bags) <br>
• Rib is included in outside of these dishes, and it is hard to fall over when stacking.
$0
HDPE Sealed Tank White 13L
AS ONE Corporation
<br>
• Model number: HD-13 white<br>
• Capacity (L): 13<br>
• Upper outer diameter x lower outer diameter x height (mm): f302 x f276 x 266<br>
• Material: Body, lid/HDPE (high density polyethylene), Packing/Silicone rubber,<br>
• Top inner diameter x bottom inner diameter x height: f285 x f270 x 250mm <br>
• Top of lid has rib, so these are possible to stack them up. <br>
• Taper structure makes them stack. <br>
• Sealed by silicon packing, and no liquid spill.
$0
HDPE Sealed Tank Blue 13L
AS ONE Corporation
<br>
• Model number: HD-13 blue<br>
• Capacity (L): 13<br>
• Upper outer diameter x lower outer diameter x height (mm): f302 x f276 x 266<br>
• Material: Body, lid/HDPE (high density polyethylene), Packing/Silicone rubber,<br>
• Top inner diameter x bottom inner diameter x height: f285 x f270 x 250mm <br>
• Top of lid has rib, so these are possible to stack them up. <br>
• Taper structure makes them stack. <br>
• Sealed by silicon packing, and no liquid spill.
$0
Stand with Adjuster Black 360 x 300mm
AS ONE Corporation
<br>
• Model number: ST-360<br>
• Strut material: Stainless steel (SUS304)<br>
• Internal base dimension: 260 x 190mm<br>
• Strut size: f19 x 800mm<br>
• Weight: Approx 8kg<br>
• Base color: Black<br>
• External base dimension: 360 x 300mm
$0
Stand with Adjuster Black 360 x 335mm
AS ONE Corporation
<br>
• Model number: ST-360C<br>
• Strut material: Stainless steel (SUS304)<br>
• Internal base dimension: 280 x 210mm<br>
• Strut size: f19 x 800mm<br>
• Weight: Approx 8kg<br>
• Base color: Black<br>
• External base dimension: 360 x 335mm (size containing caster. )
$0
Stand with Adjuster Black 330 x 270mm
AS ONE Corporation
<br>
• Model number: ST-300<br>
• Strut material: Stainless steel (SUS304)<br>
• Internal base dimension: 260 x 192mm<br>
• Strut size: f16 x 700mm<br>
• Weight: Approx 8kg<br>
• Base color: Black<br>
• External base dimension: 330 x 270mm
$0
Stand with Adjuster Black 330 x 305mm
AS ONE Corporation
<br>
• Model number: ST-300C<br>
• Strut material: Stainless steel (SUS304)<br>
• Internal base dimension: 260 x 192mm<br>
• Strut size: f16 x 700mm<br>
• Weight: Approx 8kg<br>
• Base color: Black<br>
• External base dimension: 330 x 305mm (size containing caster. )
$0
Stand
AS ONE Corporation
<br>
• Material: Strut/iron (chromium plating), Base/casting iron (coating)<br>
• Pipe diameter x height: f16 x 700mm<br>
• Internal base dimension: 162/170 x 308mm<br>
• Weight: Approx 4kg<br>
• Model number: ST-U<br>
• Holder: without <br>
• U-shaped base performs to have enough space.
$0
Holder
AS ONE Corporation
<br>
• Model number: ML-16<br>
• Unclutched fixed type<br>
• adaptive pipe diameter (mm): f 9.5 to f 16<br>
• Material: zinc alloy die cast (hard chrome plating) <br>
• Fixed type can be quartered to support rod. <br>
• Rotary type can be placed at any direction desired by rotating 360? to support rod. <br>
• Possible to choose type with tab or without tab, according to weight of objects etc.
$0
Holder
AS ONE Corporation
<br>
• Model number: MNNL-16<br>
• A fixed fixed type<br>
• adaptive pipe diameter (mm): f 9.5 to f 16<br>
• Material: zinc alloy die cast (hard chrome plating) <br>
• Fixed type can be quartered to support rod. <br>
• Rotary type can be placed at any direction desired by rotating 360? to support rod. <br>
• Possible to choose type with tab or without tab, according to weight of objects etc.
$0
Holder
AS ONE Corporation
<br>
• Model number: MNR-16<br>
• rotation type with nails<br>
• adaptive pipe diameter (mm): f 9.5 to f 16<br>
• Material: zinc alloy die cast (hard chrome plating) <br>
• Fixed type can be quartered to support rod. <br>
• Rotary type can be placed at any direction desired by rotating 360? to support rod. <br>
• Possible to choose type with tab or without tab, according to weight of objects etc.
$0
Holder
AS ONE Corporation
<br>
• Model number: MR-18<br>
• rotation type without nails<br>
• adaptive pipe diameter (mm): f 9.5 to f 18<br>
• Material: zinc alloy die cast (hard chrome plating) <br>
• Fixed type can be quartered to support rod. <br>
• Rotary type can be placed at any direction desired by rotating 360? to support rod. <br>
• Possible to choose type with tab or without tab, according to weight of objects etc.
$0
Holder
AS ONE Corporation
<br>
• Model number: MST-19 T<br>
• adaptive pipe diameter (mm): Maximum f 19<br>
• Material: zinc alloy die cast <br>
• T-shaped fixing screw facilitates tightening. <br>
• Clamp rod can be attached at right angle to support rod. <br>
• Due to provided support, MRA-19T can fix heavy load, flat plate, and panel with thickness of up to 19*mm*. <br>
• MOS-29T with different opening dia. is compatible with large dia. objects, and easy to use.
$0
Holder with Support
AS ONE Corporation
<br>
• Model number: MRA-19 T<br>
• adaptive pipe diameter (mm): Maximum f 19<br>
• Material: zinc alloy die cast <br>
• T-shaped fixing screw facilitates tightening. <br>
• Clamp rod can be attached at right angle to support rod. <br>
• Due to provided support, MRA-19T can fix heavy load, flat plate, and panel with thickness of up to 19*mm*. <br>
• MOS-29T with different opening dia. is compatible with large dia. objects, and easy to use.
$0
Holder For Large Mouth Diameter Correspondence Type
AS ONE Corporation
<br>
• Model number: MOS-29T<br>
• Applicable pipe diameter (mm): f9.5 - 29?f9.5 - 23<br>
• Material: Aluminum alloy die casting (body), Stainless Steel knob bolt (screw part) <br>
• T-shaped fixing screw facilitates tightening. <br>
• Clamp rod can be attached at right angle to support rod. <br>
• Due to provided support, MRA-19T can fix heavy load, flat plate, and panel with thickness of up to 19*mm*. <br>
• MOS-29T with different opening dia. is compatible with large dia. objects, and easy to use.
$0