AS ONE Corporation

Funnel for Waste Liquid f300mm
AS ONE Corporation
• Funnel diameter (mm): f 300
• Material: funnel / PE (polyethylene), Sphere / PP (polypropylene)
• Applicable tank mouth inner diameter: f 50 mm
• Sphere diameter: f40mm
• Recommended tank: recovery of waste liquid container (5-037-03, 5-085-2.03, 5-085-11.12)
• Reduces odor coming from funnel.
• When liquid is poured, ball floats to let liquid flow into tank.
• For HRH-P, if filled with waste liquid, upper PP(polypropylene) ball and indicator rod float from funnel to show that funnel is full.
$0

Funnel for Waste Liquid f120mm (With Full Water Markings)
AS ONE Corporation
• Type number: HRH-P (full watermark)
• funnel diameter (mm): f 120
• Material: funnel / PE (polyethylene), Sphere / PP (polypropylene)
• Applicable tank mouth inner diameter: f 50 mm
• Sphere diameter: f 30 mm
• Recommended tank: recovery of waste liquid container (5-037-03, 5-085-2.03, 5-085-11.12)
• Reduces odor coming from funnel.
• When liquid is poured, ball floats to let liquid flow into tank.
• For HRH-P, if filled with waste liquid, upper PP(polypropylene) ball and indicator rod float from funnel to show that funnel is full.
$0

Round Test Tube Stand
AS ONE Corporation
• Material: Stainless steel (SUS304)
• Adaptive test tube: f18mm test tube
• Number of test tubes strage: 24 pieces
• Model number: RSS-140
• Size (mm): f140 x 205
• These products are designed to fit inner dimensions of autoclave.
• Enable processing of many test tubes in autoclave at once.
• Handle makes easy to carry.
$0

Round Test Tube Stand
AS ONE Corporation
• Material: Stainless steel (SUS304)
• Adaptive test tube: f18mm test tube
• Number of test tubes strage: 57 pieces
• Model number: RSS-210
• Size (mm): f210 x 205
• These products are designed to fit inner dimensions of autoclave.
• Enable processing of many test tubes in autoclave at once.
• Handle makes easy to carry.
$0

Slim Stirrer Individual Rotation Control
AS ONE Corporation
• Separate rotation control
• Number of stirring: 4
• Size: 499 x 100 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSI-4
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
$0

Slim Stirrer Individual Rotation Control
AS ONE Corporation
• Separate rotation control
• Number of stirring: 8
• Size: 499 x 190 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSI-8
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
$0

Slim Stirrer Individual Rotation Control
AS ONE Corporation
• Separate rotation control
• Number of stirring: 12
• Size: 699 x 190 x 52mm
• Rotation speed: 100 - 1700rpm
• Motor: DC brush motor (rotation axis center interval 100mm)
• Exterior material: Stainless steel (SUS304)
• Stirred capacity: Up to 500mL
• Power supply: 100VAC 50/60Hz
• Power cord length: 2.5m
• Model number: KSI-12
• The compact, lateral and flat body utilizes limited space to the maximum extent.
• The KSI type allows individual setting of the number of rotations, and enables various stirring at the same time.
• The KSS type rotates all motors for the same number of rotations, and enables rotation under identical conditions.
• Multiple 500*ml* beakers can be set in the compact body.
$0

Needle Valve Unit (For Vacuum Adjustment)
AS ONE Corporation
• Model number: PSR-01
• Valve material: Polyamide, brass
• Connection port size (mm): f8
• For vacuum adjustment
• Compactly arranged the necessity for pressure control of vacuum pump.
• It is capable of simple pressure adjustment of pump by using its open side needle valve.
• It can be used to leak between pumps after decompression completion.
$0

Mini Water Pump
AS ONE Corporation
• Model number: EWP-01
• Maximum vacuum attainment level: -20kPa or more
• Liquid junction material EPDM (ethylene propylene rubber), PBT resin
• Size: 50 x 170 x 35mm
• Pipe fittings: f5.5mm hose end
• Power supply: 100VAC, 50/60Hz 20W
• Power cord length: Approximately 2m (2P plug)
• Flow rate: 100mL/minute
• Maximum discharge pressure: 30kPa or more
• Product is self-priming pump, and does not require priming water.
• Diaphragm and valve are integrated model to realize a light and compact body.
• The separately-sold battery pack allows outdoor use.
$0

ASPURE Inner Glove Without Fingers Free 10 Pairs 20 Pcs
AS ONE Corporation
• Size: Free
• Type: without fingertip
• Quantity: 1 pack (10 pairs)
• Material: Nylon 100% (filament fiber)
• For both right and left
• Designed to be used as inner gloves for latex, nitrile, and PVC gloves.
• Elasticated gloves high tensile strength.
$0

ASPURE Inner Glove With Fingers S 10 Pairs 20 Pcs
AS ONE Corporation
• Size: S
• Type: with fingertip
• Quantity: 1 pack (10 pairs)
• Material: Nylon 100% (filament fiber)
• For both right and left
• Designed to be used as inner gloves for latex, nitrile, and PVC gloves.
• Elasticated gloves high tensile strength.
$0

ASPURE Inner Glove With Fingers M 10 Pairs 20 Pcs
AS ONE Corporation
• Size: M
• Type: with fingertip
• Quantity: 1 pack (10 pairs)
• Material: Nylon 100% (filament fiber)
• For both right and left
• Designed to be used as inner gloves for latex, nitrile, and PVC gloves.
• Elasticated gloves high tensile strength.
$0

ASPURE Inner Glove With Fingers L 10 Pairs 20 Pcs
AS ONE Corporation
• Size: L
• Type: with fingertip
• Quantity: 1 pack (10 pairs)
• Material: Nylon 100% (filament fiber)
• For both right and left
• Designed to be used as inner gloves for latex, nitrile, and PVC gloves.
• Elasticated gloves high tensile strength.
$0

ASPURE Inner Glove With Fingers XL 10 Pairs 20 Pcs
AS ONE Corporation
• Material: Nylon 100% (filament fiber)
• For both right and left
• Size: LL
• Type: with fingertip
• Quantity: 1 pack (10 pairs)
• *Samples 1-4293-01 and 1-4294-01 to -03 are available.
• Designed to be used as inner gloves for latex, nitrile, and PVC gloves.
• Elasticated gloves high tensile strength.
$0

ASPURE ESD Polyester Gloves XL
AS ONE Corporation
• Size: XL
• Quantity: 1 pack (10 pairs)
• Material: Polyester filament fiber (carbon braiding)
• Surface resistance value: 10 9~10 10O/?
• Color (wrist part): Blue
• Knitted carbon reduces static electricity.
• Breathable and low dust generation can be used comfortably.
$0

ASPURE PVC Glove
AS ONE Corporation
• Size: S
• Quantity: 1 box (100 Pcs/bag x 10 bags)
• Material: PVC (vinyl chloride resin)
• Length: About 280mm
• Thickness: About 0.11mm
• For both right and left
• Disposable type
• Excellent fitting property and silky-smooth feeling.
• Packaged every 100pieses under environment of class 1000.
$0

PCR Tray , Lid 5 Color Pack (Blue, Green, Orange, Pink, Yellow x 4 Pcs)
AS ONE Corporation
• Model number: T328-96AS
• Size (mm): 130 x 90 x 30
• Color: Five-color pack
• Material: PP (Polypropylene)
• Allowable temperature limit: -90 - 121?
• Autoclavable
• With lid
• Quantity: 1 case (body, lid 5 colors x 4 pieces included)
• Convenient for storage of 0.2*ml* single, 8 lines and 12 lines PCR tube, and PCR plate.
• Connecting horizontally and piling up is perpendicularly are possible.
$0

PCR Tray Blue , Lid x 20 Pcs
AS ONE Corporation
• Model number: T328-96B
• Size (mm): 130 x 90 x 30
• Color: Blue
• Material: PP (Polypropylene)
• Allowable temperature limit: -90 - 121?
• Autoclavable
• With lid
• Quantity: 1 case (body, lid x 20 pieces included)
• Convenient for storage of 0.2*ml* single, 8 lines and 12 lines PCR tube, and PCR plate.
• Connecting horizontally and piling up is perpendicularly are possible.
$0

PCR Tray Green , Lid x 20 Pcs
AS ONE Corporation
• Model number: T328-96G
• Size (mm): 130 x 90 x 30
• Color: Green
• Material: PP (Polypropylene)
• Allowable temperature limit: -90 - 121?
• Autoclavable
• With lid
• Quantity: 1 case (body, lid x 20 pieces included)
• Convenient for storage of 0.2*ml* single, 8 lines and 12 lines PCR tube, and PCR plate.
• Connecting horizontally and piling up is perpendicularly are possible.
$0

PCR Tray Orange , Lid x 20 Pcs
AS ONE Corporation
• Model number: T328-96O
• Size (mm): 130 x 90 x 30
• Color: Orange
• Material: PP (Polypropylene)
• Allowable temperature limit: -90 - 121?
• Autoclavable
• With lid
• Quantity: 1 case (body, lid x 20 pieces included)
• Convenient for storage of 0.2*ml* single, 8 lines and 12 lines PCR tube, and PCR plate.
• Connecting horizontally and piling up is perpendicularly are possible.
$0