AS ONE Corporation
Tube Adapter for Nitrogen Concentration Meter (AJX-N2BR)
AS ONE Corporation
<br>
• Model number: N2ADP<br>
• Tube adapter (AJX-N2BR only)<br>
• Oxygen concentration conversion <br>
• Displays indicated value is 100-oxygen density(%) and degree of gas substitution of nitrogen or argon can be recognized at a glance. <br>
• Available for N*@2@* for storage of electronic component, N*@2@* for lead-free solder, desiccator, glove box and nitrogen storage. <br>
• AJX-N2BR having M16 thread hole (pitch 1*mm*) can attach to glove box or more. <br>
• N2ADP enable to measure density inside line with connecting tube of O.D. f6*mm*.
$0
Liquid Filter Cylinder Stainless Steel 40 Mesh
AS ONE Corporation
<br>
• Model number: ER-01<br>
• Configuration: Triangle frame, cylinder strainer<br>
• Cylinder strainer: f33.5 x 70mm, Stainless Steel (SUS304)<br>
• Frame: Triangle 170mm, PMMA (acrylic)<br>
• Frame bore diameter: f34mm<br>
• Stainless Steel sieve opening: 40 mesh <br>
• cylindrical strainer set in hanging frame filters liquid in accordance with filtering substances. <br>
• hanging frame can be used with beakers of 0.5~2.0*l*.
$0
Liquid Filter Cylinder Stainless Steel 80 Mesh
AS ONE Corporation
<br>
• Model number: ER-03<br>
• Configuration: Triangle frame, cylinder strainer<br>
• Cylinder strainer: f33.5 x 70mm, Stainless Steel (SUS304)<br>
• Frame: Triangle 170mm, PMMA (acrylic)<br>
• Frame bore diameter: f34mm<br>
• Stainless Steel sieve opening: 80 mesh <br>
• cylindrical strainer set in hanging frame filters liquid in accordance with filtering substances. <br>
• hanging frame can be used with beakers of 0.5~2.0*l*.
$0
Liquid Filter Cylinder Stainless Steel 100 Mesh
AS ONE Corporation
<br>
• Model number: ER-04<br>
• Configuration: Triangle frame, cylinder strainer<br>
• Cylinder strainer: f33.5 x 70mm, Stainless Steel (SUS304)<br>
• Frame: Triangle 170mm, PMMA (acrylic)<br>
• Frame bore diameter: f34mm<br>
• Stainless Steel sieve opening: 100 mesh <br>
• cylindrical strainer set in hanging frame filters liquid in accordance with filtering substances. <br>
• hanging frame can be used with beakers of 0.5~2.0*l*.
$0
Desiccator (Shading Type) 300 x 345 x 535mm
AS ONE Corporation
<br>
• Material: Body/shading PVC (vinyl chloride resin), Shelf board/PS (polystyrene), Rubber foot/natural rubber<br>
• Shelf board load capacity: Approximately 2kg/board<br>
• Total withstand load: Approx 10kg<br>
• Shelf board mounting pitch: 1 stage in the bottom/50mm, Other/30mm (minimum shelf board spacing 20mm)<br>
• Shelf board dimensions: 257 x 270 x 4mm<br>
• Weight: 4.5kg (including shelf board)<br>
• Accessories: Shelf board/3 board, Silica gel plate x 1 plate<br>
• Outer dimensions: 300 x 345 x 525mm<br>
• Inner dimension: 285 x 275 x 485mm<br>
• Model number: LH-SK <br>
• Suitable for storing light-sensitive samples because 5 sides are made of light-blocking materials.
$0
Desiccator (Shading Type) 500 x 345 x 335mm
AS ONE Corporation
<br>
• Material: Body/shading PVC (vinyl chloride resin), Shelf board/PS (polystyrene), Rubber foot/natural rubber<br>
• Shelf board load capacity: Approximately 2kg/board<br>
• Total withstand load: Approx 10kg<br>
• Shelf board mounting pitch: 1 stage in the bottom/50mm, Other/30mm (minimum shelf board spacing 20mm)<br>
• Shelf board dimensions: 456 x 270 x 5mm<br>
• Weight: 4.85kg (including shelf board)<br>
• Accessories: Shelf board x 2, Silica gel plate x 1 plate<br>
• Outer dimensions: 500 x 345 x 335mm<br>
• Inner dimension: 485 x 275 x 285mm<br>
• Model number: LL-SK <br>
• Suitable for storing light-sensitive samples because 5 sides are made of light-blocking materials.
$0
Auto Dry Desiccator (Shading Type) 330 x 345 x 525mm
AS ONE Corporation
<br>
• Auto dry type<br>
• Material: Shading PVC (vinyl chloride resin)<br>
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge<br>
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)<br>
• Dehumidifying element membrane area: 30 x 30mm<br>
• Power supply: AC100-240V 50/60Hz<br>
• Power consumption: 3W<br>
• Shelf board interval: 1 stage in the bottom/50mm, Other/30mm<br>
• Weight: 5kg<br>
• Power cord length: 2m (2P plug)<br>
• Accessories: Shelf board x 3, Low humidity digital thermo-hygrometer (THI-HP), silica gel plate x 1<br>
• Model number: OH-SK<br>
• Outer dimension (mm) *: 330 x 345 x 525 (*including dehumidifying unit. )<br>
• Inner dimension (mm): 285 x 275 x 485<br>
• Shading type<br>
• Control Panel : N/A<br>
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country) <br>
• Dehumidification unit, which does not incorporate driving device, does not generate sound or vibration, and is very durable. <br>
• Energy-saving design has been adopted, consume only 3W, and work as economical dehumidification storage cabinets that are always turned on. <br>
• Moisture inside cabinet is released directly in gaseous state. <br>
• <Light-shielding Type> <br>
• Suitable for storage of samples sensitive to light, as 5 sides other than door are made of light-shielding materials.
$0
Auto Dry Desiccator (Shading Type) 530 x 345 x 335mm
AS ONE Corporation
<br>
• Auto dry type<br>
• Material: Shading PVC (vinyl chloride resin)<br>
• Dehumidification system: Using solid high polymer electrolyte membrane, H2O electrolytic discharge<br>
• Reaching humidity: 25%RH (with no internal load, depending on the usage environment)<br>
• Dehumidifying element membrane area: 30 x 30mm<br>
• Power supply: AC100-240V 50/60Hz<br>
• Power consumption: 3W<br>
• Shelf board interval: 1 stage in the bottom/50mm, Other/30mm<br>
• Weight: 5.4kg<br>
• Power cord length: 2m (2P plug)<br>
• Accessories: Shelf board x 2, Low humidity digital thermo-hygrometer (THI-HP), silica gel plate x 1<br>
• Model number: OL-SK<br>
• Outer dimension (mm) *: 530 x 345 x 335 (*including dehumidifying unit. )<br>
• Inner dimension (mm): 485 x 275 x 285<br>
• Shading type<br>
• Control Panel : N/A<br>
• Plug: Type A(https://en.wikipedia.org/wiki/Mains_electricity_by_country) <br>
• Dehumidification unit, which does not incorporate driving device, does not generate sound or vibration, and is very durable. <br>
• Energy-saving design has been adopted, consume only 3W, and work as economical dehumidification storage cabinets that are always turned on. <br>
• Moisture inside cabinet is released directly in gaseous state. <br>
• <Light-shielding Type> <br>
• Suitable for storage of samples sensitive to light, as 5 sides other than door are made of light-shielding materials.
$0
Oil Bath Stirrer
AS ONE Corporation
<br>
• Temperature settings range: Room temperature +5 - 200?<br>
• Temperature display precision: +/- 2?<br>
• Heater capacity: Sheathed heater 750W<br>
• Temperature sensor: K class thermocouple<br>
• Temperature control system: Microcomputer PID control<br>
• Rotation speed: 100 - 1200rpm<br>
• Timer setting range: 0 - 99 hours 59 minutes<br>
• Safety device: Temperature excessive rise prevention device, overcurrent prevention fuse<br>
• Material: Stainless steel (SUS430), Tank/stainless steel (SUS316)<br>
• Power supply: 100VAC 50/60Hz 800W<br>
• Power cord length: 2.5m (3P plug)<br>
• Water tank volume: 4L<br>
• Attachable thermometer size: f7 - f10mm<br>
• Body weight: 4.6kg<br>
• Accessories: Stir bar (f8mm x 30mm) x 1 pc, 2P-3P conversion adapter<br>
• Outer dimension (mm): 260 x 266 (290) *1 x 241<br>
• Chamber dimensions (mm): f180 x 180<br>
• *When samples are stirred directly, use containers of f100mm or less instead of the duckboard. *1 ( ) is the dimension including protrusions.<br>
• Model number: OBS-200M <br>
• Possible to regulate temperature accurately and stably by means of PID control. <br>
• With integrated stirrer, possible to also heat sample or heat medium while stirring it. <br>
• Operation switches are panel waterproof types(conforming to IP67).
$0
Duckboard for Water Bath
AS ONE Corporation
<br>
• External dimensions: f170 x 45mm<br>
• Material: Stainless steel (SUS304)<br>
• Model number: Duckboard
$0
Water Bath Stirrer
AS ONE Corporation
<br>
• tank inner size (mm): 180 x 180<br>
• material: Main body / stainless steel (SUS430), tank / stainless (SUS316)<br>
• temperature settings range: R.T. + 5 to 80 ? C<br>
• Temperature display accuracy: ? 2 ? C<br>
• Heater capacity: Sez heater 750 W<br>
• Temperature sensor: K class thermocouple<br>
• Temperature control system: microcomputer PID control<br>
• rotation speed: 100 to 1200 rpm<br>
• Safety device: Temperature overrise prevention device and overcurrent prevention fuse<br>
• Timer setting range: 0 to 99 hours 59 minutes<br>
• Mountable thermometer size: f7 to 10 mm<br>
• power supply: AC100V 50 / 60Hz 800 W<br>
• Nagayoshi power cord: 2.5 m (With 3P Plug 2PP2-3 P Conversion Adapter)<br>
• Accessories: agitator (f8 x 30 mm) ? 1 piece<br>
• external dimension (mm): 260 x 266 (290) x 241 * () inside Including protrusion<br>
• * Do not use duckboard when mixing the sample directly. Use a container below 100 mm<br>
• The demo machine is equipped with 3-1496-01<br>
• Model Number: WBS-80 M <br>
• Possible to regulate temperature accurately and stably by means of PID control. <br>
• With integrated stirrer, possible to also heat sample or heat medium while stirring it. <br>
• Operation switches are panel waterproof types(conforming to IP67).
$0
Vice Heat Press Machine Analog
AS ONE Corporation
<br>
• Model number: MNP-001<br>
• Type: Analog<br>
• Size: 250 x 150 x 492mm<br>
• Plate size: 80 x 60mm<br>
• Stroke: 0 - 70mm<br>
• Heating temperature: -20 - 200?<br>
• Heater capacity: 160W x 1<br>
• Temperature adjustment: Microcomputer type proportional control<br>
• Sensor: K class thermocouple<br>
• Power supply: 100VAC 50/60Hz<br>
• Power cord length: 2.5m (3P plug with ground pin)<br>
• Lead feed amount: 1 Handle rotation 4mm<br>
• Weight: Approx 18kg <br>
• A simple hot press convenient for testing under a low weight. <br>
• Allows for manual adjustment of the pressure to any value. <br>
• Only the temperature of the upper hot plate can be adjusted(MNP-001). <br>
• Suitable for heating compression molding tests of various materials.
$0
Vice Heat Press Machine Digital
AS ONE Corporation
<br>
• Model number: MNP2-002D<br>
• Type: Digital settings<br>
• Size (mm): 250 x 150 x 512<br>
• Plate size: 80 x 60mm<br>
• Stroke: 0 - 45mm<br>
• Weighted: Maximum approx 500kg<br>
• Heating temperature: -20 - 200?<br>
• Heater capacity: 160W x 2<br>
• Temperature adjustment: PID control<br>
• Sensor: K class thermocouple<br>
• Power supply: 100VAC 50/60Hz<br>
• Power cord length: 2.5m (3P plug with ground pin)<br>
• Lead feed amount: 1 Handle rotation 4mm<br>
• Weight: Approx 18kg <br>
• A simple hot press convenient for testing under a low weight. <br>
• Allows for manual adjustment of the pressure to any value. <br>
• Only the temperature of the upper hot plate can be adjusted(MNP-001). <br>
• Suitable for heating compression molding tests of various materials.
$0
Vice Press Machine
AS ONE Corporation
<br>
• Model number: MP-001<br>
• Size: 250 x 150 x 467mm<br>
• Plate size: 132 x 80mm<br>
• Stroke: 0 - 115mm<br>
• Lead feed amount: 1 Handle rotation 4mm <br>
• This simple press is convenient for tests with low load. <br>
• The manual type enables arbitrary pressure adjustment. <br>
• These products are suitable for compression tests of various materials.
$0
Vice Press Machine
AS ONE Corporation
<br>
• Model number: MP-200<br>
• Size: 320 x 270 x 467mm<br>
• Plate size: 200 x 200mm<br>
• Stroke: 0 - 115mm<br>
• Lead feed amount: 1 Handle rotation 4mm <br>
• This simple press is convenient for tests with low load. <br>
• The manual type enables arbitrary pressure adjustment. <br>
• These products are suitable for compression tests of various materials.
$0
K Thermocouple (Sheath Type)
AS ONE Corporation
<br>
• Model number: KTO-1650<br>
• Sheath size: f1.6 x 50mm<br>
• Temperature range: -50 - 650?<br>
• Lead wire length: 2m<br>
• Lead wire terminal part: Crimp Y terminal<br>
• Sheath material: Stainless steel (SUS316)<br>
• Lead wire coating material: Glass<br>
• *Please use it in an environment that temperature of the base of the sheath is 100? or less. <br>
• We have an extensive lineup.
$0
K Thermocouple (Sheath Type)
AS ONE Corporation
<br>
• Model number: KTO-16100<br>
• Sheath size: f1.6 x 100mm<br>
• Temperature range: -50 - 650?<br>
• Lead wire length: 2m<br>
• Lead wire terminal part: Crimp Y terminal<br>
• Sheath material: Stainless steel (SUS316)<br>
• Lead wire coating material: Glass<br>
• *Please use it in an environment that temperature of the base of the sheath is 100? or less. <br>
• We have an extensive lineup.
$0
K Thermocouple (Sheath Type)
AS ONE Corporation
<br>
• Model number: KTO-16150<br>
• Sheath size: f1.6 x 150mm<br>
• Temperature range: -50 - 650?<br>
• Lead wire length: 2m<br>
• Lead wire terminal part: Crimp Y terminal<br>
• Sheath material: Stainless steel (SUS316)<br>
• Lead wire coating material: Glass<br>
• *Please use it in an environment that temperature of the base of the sheath is 100? or less. <br>
• We have an extensive lineup.
$0
K Thermocouple (Sheath Type)
AS ONE Corporation
<br>
• Model number: KTO-16200<br>
• Sheath size: f1.6 x 200mm<br>
• Temperature range: -50 - 650?<br>
• Lead wire length: 2m<br>
• Lead wire terminal part: Crimp Y terminal<br>
• Sheath material: Stainless steel (SUS316)<br>
• Lead wire coating material: Glass<br>
• *Please use it in an environment that temperature of the base of the sheath is 100? or less. <br>
• We have an extensive lineup.
$0
K Thermocouple (Sheath Type)
AS ONE Corporation
<br>
• Model number: KTO-16300<br>
• Sheath size: f1.6 x 300mm<br>
• Temperature range: -50 - 650?<br>
• Lead wire length: 2m<br>
• Lead wire terminal part: Crimp Y terminal<br>
• Sheath material: Stainless steel (SUS316)<br>
• Lead wire coating material: Glass<br>
• *Please use it in an environment that temperature of the base of the sheath is 100? or less. <br>
• We have an extensive lineup.
$0