Temperature Controllers
Temperature Controllers
[Global Model] Digital High Accuracy Temperature Controller 0 - 500? 220V?10%
AS ONE Corporation
• Settings range: 0 - 500?<br>
• Sensor type: K class thermocouple<br>
• Temperature control system: PID control (auto-tuning)<br>
• Temperature display precision: SV +/-3% or 3?, whichever is larger<br>
• Temperature setting system: Sheet key touch system<br>
• Output terminal: M4 screw terminal<br>
• Connection capacity: MAX 7A (resistance load)<br>
• Power supply: 220V?10%(2P plug)<br>
• Size: 135 x 150 x 94mm<br>
• Attached sensor: K class thermocouple f3.2 x 200mm (stainless steel sheath (SUS304)) cable length 1.9m<br>
• Country of origin: Japan<br>
• Control Panel : English<br>
• Plug: Type F(https://en.wikipedia.org/wiki/Mains_electricity_by_country)
$0
Overtemperature Control Device, Alarm Generator Screwed Fixed Sensor
AS ONE Corporation
<br>
• Screwed fixed sensor<br>
• Sheath size: f4 x 30mm<br>
• Allowable temperature limit: 180?<br>
• M8 nut tighten specification <br>
• When set temperature is exceeded, power supply is cut and it will not recover even after temperature drops(temperature overheat prevention function). <br>
• Turn on separately connected alarm or lamp according to set temperature(alarm generation function).
$0
Hot Plate
AS ONE Corporation
<br>
• Model number: EC-1200N<br>
• Highest temperature: 300 ?<br>
• Plate size: 400 x 300mm<br>
• Plate material: Aluminum<br>
• Temperature control system: PID control with auto-tuning function<br>
• Main unit size: 450 x 350 x 133mm<br>
• Plate material: Aluminum<br>
• Withstand load: Approximately 15kg (however, distributed load to 80% of plate area)<br>
• Weight: Approx 11kg<br>
• Power supply: 100VAC 50/60Hz, maximum 1kW<br>
• Time allowed for continuous use: 48 hours (at the time of 250?)<br>
• Power cord length: 2m (2P plug) <br>
• It is uniformed temperature distribution with large area hot plate that is adopted a flat plate heater as heat source. <br>
• Timer setting of 3patterns is possible. <br>
• EC-1200NR:Separation type of heater, temperature controller, and excellent in durability.
$0
Digital Temperature Controller
AS ONE Corporation
<br>
• Model number: TC-1000A<br>
• Temperature settings range: -20.0 - 500.0?<br>
• Minimum display unit: 0.1?<br>
• Temperature display precision: F, S +/- 0.5%<br>
• Temperature control system: Microcomputer type PID control<br>
• Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)<br>
• Sensor: K class thermocouple (standard), Pt100O (option)<br>
• Safety mechanism Self-diagnosis function (heater abnormality detection, sensor abnormality detection), circuit protector<br>
• Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), settings memory function, key lock function, auto-tuning function<br>
• Power supply: AC100V 50/60Hz control output (3P AC100V MAX12A)<br>
• Size: 147 x 150 x 112mm<br>
• Accessories: K class thermocouple (f4.0 x 200mm) 1 unit <br>
• <TC-1000A?2000A?3000A Common Feature> <br>
• Device is equipped with 4 types of timers(ON?OFF?ON/OFF?SET). <br>
• Temperature controller also features self-diagnostic functions such as heater malfunction detection and sensor malfunction detection. <br>
• Controller regulates temperature accurately with integrated microprocessor PID control system. <br>
• <TC-2000A?3000A Common Feature> <br>
• These controllers are equipped with repeat function and programming function that allows you to input up to 8 steps for temperature and time. <br>
• <TC-3000A> <br>
• With dedicated software(CD-ROM) that comes as standard feature and is used for data storage and communication, possible to easily manage testing data on your computer(communication cable is sold separately). <br>
• Device comes with alarm signal output function as standard feature, allowing you to stop other equipment or to start reserve system if error occurs.
$0
Digital Temperature Controller
AS ONE Corporation
<br>
• Model number: TC-2000A<br>
• Temperature settings range: -20.0 - 500.0?<br>
• Minimum display unit: 0.1?<br>
• Temperature display precision: F, S +/- 0.5%<br>
• Temperature control system: Microcomputer type PID control<br>
• Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)<br>
• Sensor: K class thermocouple (standard), Pt100O (option)<br>
• Safety mechanism Self-diagnosis function (heater abnormality detection, sensor abnormality detection), circuit protector<br>
• Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), settings memory function, key lock function, auto-tuning function<br>
• Additional function: Program function: (1) Number of steps/maximum 8 steps, (2) repeat times/maximum 9999 times, (3) setting resolution/temperature 0.1?, Time 1 minute, (4) time setting range/1 minute - 99 hours 59 minutes (1 minute unit)<br>
• Power supply: AC100V 50/60Hz control output (3P AC100V MAX12A)<br>
• Size: 147 x 150 x 112mm<br>
• Accessories: K class thermocouple (f4.0 x 200mm) 1 unit <br>
• <TC-1000A?2000A?3000A Common Feature> <br>
• Device is equipped with 4 types of timers(ON?OFF?ON/OFF?SET). <br>
• Temperature controller also features self-diagnostic functions such as heater malfunction detection and sensor malfunction detection. <br>
• Controller regulates temperature accurately with integrated microprocessor PID control system. <br>
• <TC-2000A?3000A Common Feature> <br>
• These controllers are equipped with repeat function and programming function that allows you to input up to 8 steps for temperature and time. <br>
• <TC-3000A> <br>
• With dedicated software(CD-ROM) that comes as standard feature and is used for data storage and communication, possible to easily manage testing data on your computer(communication cable is sold separately). <br>
• Device comes with alarm signal output function as standard feature, allowing you to stop other equipment or to start reserve system if error occurs.
$0
Digital Temperature Controller
AS ONE Corporation
<br>
• Model number: TC-3000A<br>
• Temperature settings range: -20.0 - 500.0?<br>
• Minimum display unit: 0.1?<br>
• Temperature display precision: F, S +/- 0.5%<br>
• Temperature control system: Microcomputer type PID control<br>
• Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)<br>
• Sensor: K class thermocouple (standard), Pt100O (option)<br>
• Safety mechanism Self-diagnosis function (upper or lower limit temperature abnormality detection, heater abnormality detection, sensor abnormality detection), circuit protector<br>
• Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), settings memory function, key lock function, auto-tuning function<br>
• Additional function: Program function: (1) Number of steps/maximum 8 steps, (2) repeat times/maximum 9999 times, (3) setting resolution/temperature 0.1?, Time 1 minute, (4) time setting range/1 minute - 99 hours 59 minutes (1 minute unit)<br>
• Additional function: Upper or lower limit temperature alarm, data storage, communication function: PC output (USB) external temperature sensor supported, alarm signal output<br>
• Power supply: AC100V 50/60Hz control output (3P AC100V MAX12A)<br>
• Size: 147 x 150 x 112mm<br>
• Accessories: K class thermocouple (f4.0 x 200mm) 1 unit <br>
• <TC-1000A?2000A?3000A Common Feature> <br>
• Device is equipped with 4 types of timers(ON?OFF?ON/OFF?SET). <br>
• Temperature controller also features self-diagnostic functions such as heater malfunction detection and sensor malfunction detection. <br>
• Controller regulates temperature accurately with integrated microprocessor PID control system. <br>
• <TC-2000A?3000A Common Feature> <br>
• These controllers are equipped with repeat function and programming function that allows you to input up to 8 steps for temperature and time. <br>
• <TC-3000A> <br>
• With dedicated software(CD-ROM) that comes as standard feature and is used for data storage and communication, possible to easily manage testing data on your computer(communication cable is sold separately). <br>
• Device comes with alarm signal output function as standard feature, allowing you to stop other equipment or to start reserve system if error occurs.
$0
Digital Overtemperature Control Device
AS ONE Corporation
<br>
• Model number: OP-1000A<br>
• Settings range (?): -20.0 - 500.0<br>
• Minimum display unit (?): 0.1<br>
• Temperature display precision: To +/-2.6?<br>
• Sensor: K class thermocouple<br>
• Connection capacity: AC100V MAX12A<br>
• Safety device: Sensor abnormality detection, circuit protector<br>
• Temperature setting system: LCD digital display (setting/measurement temperature simultaneous display)<br>
• Additional function: Settings memory, key lock<br>
• Power supply: 100VAC 50/60Hz<br>
• Size: 147 x 150 x 106mm<br>
• Accessories: K class thermocouple x 1<br>
• *It doesn't return when temperature goes down after the power is cut by the temperature excessive rise. <br>
• Digital overheat protector automatically turns off power if temperature setting is exceeded(restart device to reset it). <br>
• Backlit LCD with excellent visibility simultaneously shows set temperature and actual temperature.
$0
Sensor Protection Tube
AS ONE Corporation
<br>
• For f3.2mm (FEP)<br>
• Model number: Sensor protection tube <br>
• Equipped with 2 output terminals of 3P receptacle and terminal stop. <br>
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch. <br>
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment). <br>
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Digital Desktop Temperature Controller 0 - 399?
AS ONE Corporation
<br>
• Model number: TJA-450K<br>
• Settings range: 0 - 399?<br>
• Sensor type: K class thermocouple<br>
• Temperature control system: ON/OFF control (2 positions type)<br>
• Temperature display precision: +/-1% (FS) +/- 1 digit or 3? whichever is larger<br>
• Temperature setting system: 3 digits digital switch settings<br>
• Output terminal: 3P outlet, M4 screw terminal,<br>
• Connection capacity: MAX 15A (resistance load)<br>
• Power supply: 100VAC 50/60Hz<br>
• Size: 135 x 150 x 94mm<br>
• Attached sensor: K class thermocouple f3.2 x 200mm (stainless steel sheath (SUS304)) cable length 1.9m <br>
• Equipped with 2 output terminals of 3P receptacle and terminal stop. <br>
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch. <br>
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment). <br>
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Digital Desktop Temperature Controller 0.0 - 99.9?
AS ONE Corporation
<br>
• Model number: TJA-450P<br>
• Settings range: 0.0 - 99.9?<br>
• Sensor type: Pt100O<br>
• Temperature control system: ON/OFF control (2 positions type)<br>
• Temperature display precision: +/-1% (FS) +/- 1 digit or 3? whichever is larger<br>
• Temperature setting system: 3 digits digital switch settings<br>
• Output terminal: 3P outlet, M4 screw terminal<br>
• Connection capacity: MAX 15A (resistance load)<br>
• Power supply: 100VAC 50/60Hz<br>
• Size: 135 x 150 x 94mm<br>
• Attached sensor: Pt100O f4 x 200mm (stainless steel sheath (SUS304)) cable length: 1.9m <br>
• Equipped with 2 output terminals of 3P receptacle and terminal stop. <br>
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch. <br>
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment). <br>
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Digital High Accuracy Temperature Controller 0 - 500?
AS ONE Corporation
<br>
• Model number: TJA-550K<br>
• Settings range: 0 - 500?<br>
• Sensor type: K class thermocouple<br>
• Temperature control system: PID control (auto-tuning)<br>
• Temperature display precision: SV +/-3% or 3?, whichever is larger<br>
• Temperature setting system: Sheet key touch system<br>
• Output terminal: 3P outlet, M4 screw terminal<br>
• Connection capacity: MAX 10A (resistance load)<br>
• Power supply: 100VAC 50/60Hz<br>
• Size: 135 x 150 x 94mm<br>
• Attached sensor: K class thermocouple f3.2 x 200mm (stainless steel sheath (SUS304)) cable length 1.9m <br>
• Equipped with 2 output terminals of 3P receptacle and terminal stop. <br>
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch. <br>
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment). <br>
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Digital High Accuracy Temperature Controller 0.0 - 200.0?
AS ONE Corporation
<br>
• Model number: TJA-550P<br>
• Settings range: 0.0 - 200.0?<br>
• Sensor type: Pt100O<br>
• Temperature control system: PID control (auto-tuning)<br>
• Temperature display precision: SV +/-3% or 3?, whichever is larger<br>
• Temperature setting system: Sheet key touch system<br>
• Output terminal: 3P outlet, M4 screw terminal<br>
• Connection capacity: MAX 10A (resistance load)<br>
• Power supply: 100VAC 50/60Hz<br>
• Size: 135 x 150 x 94mm<br>
• Attached sensor: Pt100O f4 x 200mm (stainless steel sheath (SUS304)) cable length: 1.9m <br>
• Equipped with 2 output terminals of 3P receptacle and terminal stop. <br>
• TJA-450 series temperature setting can be done easily and precisely by just pressing the DIP switch. <br>
• TJA-550 series temperature control system allows highly accurate temperature control with PID control(auto tuning equipment). <br>
• TJA-550 series temperature display adopts PV/SV two-level display which shows measured values and set values at a glance, preventing setting mistakes and so on.
$0
Mass Temperature Controller
AS ONE Corporation
<br>
• Model number: TXN-25A<br>
• Temperature settings range (Pt sensor/K class thermocouple): 0.0 - 200.0?/0 - 500?.<br>
• Temperature control system: PID control, SSR output<br>
• Connection capacity: AC100/200V 25A<br>
• Timer type: Autostart, auto-stop, SV start<br>
• Timer setting available time: 1 minute - 99 hours 59 minutes<br>
• Temperature indication accuracy: +/- 2? or +/- 0.3% + 1 digit, whichever is larger<br>
• Output: Control voltage output/AC100/200V 25A, Alarm contact output/AC100/200V 2.4A<br>
• Power cord: Non (connected to power terminal on the back terminal block)<br>
• Safety device: Overcurrent breaker<br>
• Size: 190 x 239 x 220mm<br>
• *Sensor is not included in the package. Please select one of the shape, type according to the application (no connector type).<br>
• *Power cord is not included. Please prepare according to used power voltage. <br>
• Since it is mass thermoregulator of max. 25A, control of large-sized heater etc. is possible. <br>
• Since it is 100V, 200V combination, possible to use it broadly in one set. <br>
• Timer set of 3 patterns is possible. <br>
• Both K type thermo couple and Pt100ohm can be used(factory setting is K type thermo couple).
$0
Hot Plate
AS ONE Corporation
<br>
• Highest temperature (?): 300<br>
• Plate size (mm): 400 x 300<br>
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)<br>
• Plate material: Aluminum + ceramic coating<br>
• Size/( ) includes protrusion: 440 x 347 (372) x 123mm<br>
• Heater capacity: Mica heater 1400W<br>
• Temperature controller: PID control<br>
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)<br>
• Safety device: Overcurrent protection, excessive temperature rise prevention<br>
• Power supply: 100VAC 50/60Hz<br>
• Power cord: 2.5m, 3P plug with an earth<br>
• Weight: 11kg<br>
• Withstand load: 10kg<br>
• Chemical top board<br>
• Model number: HPR-4030 <br>
• To prevent overheat, manual reset bimetal switch is adopted.
$0
Big Hot Plate
AS ONE Corporation
<br>
• Highest temperature (?): 300<br>
• Plate size (mm): 600 x 400<br>
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)<br>
• Plate material: Aluminum + ceramic coating<br>
• Size/( ) includes protrusion: 640 x 440 (453.5) x 160.5mm<br>
• Heater capacity: Mica heater 1400W x 2<br>
• Temperature controller: PID control<br>
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)<br>
• Safety device: Overcurrent protection, excessive temperature rise prevention<br>
• Power supply: Single phase 200V 50/60Hz<br>
• Power cord: 2.5m<br>
• Weight: 31.5kg<br>
• Withstand load: 20kg<br>
• Chemical top board<br>
• Model number: HPRB-6040 <br>
• To prevent overheat, manual reset bimetal switch is adopted. <br>
• With twice larger plate size than standard one, it supports large work.
$0
High Temperature Hot Plate
AS ONE Corporation
<br>
• Highest temperature (?): 500<br>
• Plate size (mm): 400 x 300<br>
• Body material: Stainless steel (SUS304, SUS430 for bottom plate only)<br>
• Plate material: Stainless steel (SUS410) + ceramic coating<br>
• Size/( ) includes protrusion: 555 x 340 (353.5) x 118mm<br>
• Heater capacity: Sheathed heater 3800W<br>
• Temperature controller: PID control<br>
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)<br>
• Safety device: Overcurrent protection, excessive temperature rise prevention<br>
• Power supply: Single phase 200V 50/60Hz<br>
• Power cord: 2.5m<br>
• Weight: 26kg<br>
• Withstand load: 10kg<br>
• Chemical top board<br>
• Model number: HPRH-4030 <br>
• To prevent overheat, manual reset bimetal switch is adopted. <br>
• Sheath heater is adopted which enables heating to high temperatures.
$0
Drip-Proof Hot Plate
AS ONE Corporation
<br>
• Highest temperature (?): 300<br>
• Plate size (mm): 400 x 300<br>
• Body material: Body/Stainless steel (SUS304), Control unit/stainless steel (SUS430)<br>
• Plate material: Aluminum + ceramic coating<br>
• Size/( ) includes protrusion: Body/440 x 340 (380) x 120.5mm, Control unit/110 x 150 (171) x 102mm<br>
• Heater capacity: Sheathed heater 1400W<br>
• Temperature controller: PID control<br>
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)<br>
• Safety device: Overcurrent protection<br>
• Power supply: 100VAC 50/60Hz<br>
• Power cord: 2.5m, 3P plug with an earth<br>
• Weight: 11.8kg (control unit included)<br>
• Withstand load: 10kg<br>
• Chemical top board<br>
• Model number: HPRW-4030 <br>
• Body has drip-proof structure enduring any boiled over water(drip-proof structure:IPX3). <br>
• Because body and controller are separated, body placed in draft can be controlled remotely. The distance between body and control box is approx.3*m* (unseparable).
$0
General-Purpose Hot Plate
AS ONE Corporation
<br>
• Model number: HP2020<br>
• Highest temperature: 300 ?<br>
• Plate size: 200 x 200mm<br>
• Plate material: Aluminum<br>
• Size: 202 x 202 x 64mm<br>
• Heater capacity: 700W<br>
• Temperature sensor: K class thermocouple<br>
• Mounting screw hole: M4 tapping 4 points<br>
• Power supply: 100VAC 50/60Hz<br>
• *Please use it by connecting to temperature controller or Slidac (temperature controller P.360 1-7582-01, etc. Please be careful of power consumption. ). *Power cord is not included. <br>
• These simple hot plates consist with heating plate, heater and thermocouple temperature sensor.
$0
General-Purpose Hot Plate
AS ONE Corporation
<br>
• Model number: HP4030<br>
• Highest temperature: 300 ?<br>
• Plate size: 400 x 300mm<br>
• Plate material: Aluminum<br>
• Size: 402 x 302 x 64mm<br>
• Heater capacity: 1400W<br>
• Temperature sensor: K class thermocouple<br>
• Mounting screw hole: M4 tapping 4 points<br>
• Power supply: 100VAC 50/60Hz<br>
• *Please use it by connecting to temperature controller or Slidac (temperature controller P.360 1-7582-01, etc. Please be careful of power consumption. ). *Power cord is not included. <br>
• These simple hot plates consist with heating plate, heater and thermocouple temperature sensor.
$0
Separate Hot Plate
AS ONE Corporation
<br>
• Heater capacity: Sheathed heater 900W<br>
• Temperature controller: PID control<br>
• Temperature display precision: +/- 2?<br>
• Hot plate surface temperature: Room temperature +5? - 200?<br>
• Temperature control timer: 0 - 99 hours 59 minutes (with equipment stop function)<br>
• Plate material: Aluminum + ceramic coating<br>
• Plate unit: Size/402.5 x 302.5 x 120mm, Material/stainless steel (SUS304, SUS430)<br>
• Control unit: Size/110 x 150 (169) x 102mm, () shows dimensions including protrusion, Material/stainless steel (SUS430)<br>
• Safety device: Overcurrent protection, temperature fuse<br>
• Power supply: 100VAC 50/60Hz<br>
• Power cord: 2.5m 3P plug with an earth (with 2P conversion adapter)<br>
• Weight: Body/5.7kg, Control unit/1.9kg<br>
• Withstand load: 10kg<br>
• Highest temperature (?): 200<br>
• Plate size (mm): 400 x 300<br>
• Chemical top board<br>
• Model number: SHPR-4030 <br>
• Because plate and control unit are separated, possible to place plate alone in draft. The distance between body and control box is approx.2*m*(separatable). <br>
• Possible to used for various applications because plate has no edge. <br>
• With foldable legs, plate thickness can be reduced to 39*mm*, convenient dimensions for storage. <br>
• Compact dimensions easy to set and carry.
$0