Fluid Coupling Tube
Fluid Coupling Tube
S Couplers KK130 Plug One-touch
AS ONE Corporation
• Make: Plug<br>
• Connection port diameter: -<br>
• Working fluid: Air<br>
• Hose designation: -<br>
• Applicable Hoses inner diameter/outer diameter (mm): -<br>
• Cv value: Up 34% #<br>
• Lightweight: 14% (12 g) reduction * * Compared with conventional KK 13 series<br>
• Pressure of use : 1.5 MPa (One-touch fitting type: 1 MPa)<br>
• capacity to resist pressure : 2 MPa<br>
• Material/Finishing : Body : Brass (electroless nickel plating) , Seal Rubber : Nitrile Rubber (NBR)<br>
• Country of origin: China<br>
• Securities Code: 119 -7120<br>
$0
Ion Blow Gun AGZ III
AS ONE Corporation
• Model number: AGZ3<br>
• Size (mm): 164.6 x 25 x 135.8<br>
• Weight (g) * 1: 200<br>
• Output voltage: approximately 2500 V AC<br>
• Air pressure: 0.05 to 0.6 MPa<br>
• Air flow rate: 370 L/min (MAX at 0.6 MPa)<br>
• ion balance: ? 15 V or less (Distance 100 mm)<br>
• Ozone generation: 0.04 ppm or less (Distance 150 mm)<br>
• power supply: DC24V (AC adapter attached AC100V~AC240V)<br>
• Air coupling: outer diameter f6 mm<br>
• * Compressor is not included<br>
• * excluding cables
$0
Battery-Powered Flow Meter
AS ONE Corporation
<br>
• Model number: DF067<br>
• Flow rate range (L/min): 1.5 - 14.1<br>
• Connection port: NPT3/8 female<br>
• Conform fluid: Water<br>
• Fluid temperature: 0 - 40?<br>
• Instant flow rate: 1.5 - 14.1L/min<br>
• Integrating flow: 9999.9L<br>
• Measurement accuracy: +/- 10% (FS)<br>
• Maximum operating pressure: 0.6MPa<br>
• Function: Auto ON/OFF, battery remaining amount alarm<br>
• Liquid junction material: POM (polyacetal), nylon type plastic mug, stainless steel (SUS304), EPDM (ethylene propylene rubber)<br>
• Power: AAA dry cell x 2 (included for test)<br>
• Size: 74 x 52 x 70mm<br>
• Weight: 140g <br>
• Possible to mounted horizontally. <br>
• Convenient for carrying around by battery operated type.
$0
Battery-Powered Flow Meter
AS ONE Corporation
<br>
• Model number: DF0671<br>
• Instantaneous flow rate area (L/min): 0.8 to 8.0<br>
• Connection port: G 1/4 male<br>
• adaptive fluid: Water<br>
• Fluid temperature: 0 to 40 ?<br>
• Accumulated flow rate: 99999 L<br>
• Measurement accuracy: ?10% (FS)<br>
• maximum working pressure : 0.6MPa<br>
• Function: Auto ON/OFF/Battery level alarm<br>
• Materials of liquid contact part : POM (polyacetal) , nylon plastic , stainless steel (SUS304) , EPDM (ethylene propylene rubber)<br>
• Power supply : AA size battery x 2 pieces (test attachment)<br>
• Size: 74 x 52 x 70mm<br>
• Weight: 140g <br>
• Can be mounted horizontally.<br>
• As it is a battery-powered type, it is convenient to carry.
$0
Battery-Powered Flow Meter
AS ONE Corporation
<br>
• Model number: DF0671 -44<br>
• Instantaneous flow rate area (L/min): 1.5 to 25.0<br>
• Connection port: G 1/2 male<br>
• adaptive fluid: Water<br>
• Fluid temperature: 0 to 60 ?<br>
• Accumulated flow rate: 99999 L<br>
• Measurement accuracy: ?10% (FS)<br>
• maximum working pressure : 0.6MPa<br>
• Function: Auto ON/OFF/Battery level alarm<br>
• Materials of liquid contact part : PPS (polyphenylene sulfide) , nylon plastic , ceramic , EPDM (ethylene propylene rubber)<br>
• Power supply : AA size battery x 2 pieces (test attachment)<br>
• Size: 71 x 35 x 56mm<br>
• Weight: 140g <br>
• Can be mounted horizontally.<br>
• As it is a battery-powered type, it is convenient to carry.
$0
Titanium Cooling Coil
AS ONE Corporation
<br>
• Model number: MR-01<br>
• Material: TTH-340W (Titanium pipe type II)<br>
• Heat transfer area: 0.1m2<br>
• Cooling water flow rate: 4 - 10L/min<br>
• Cooling tube plate thickness: 0.5tmm<br>
• Joint: Outer diameter 10.5mm<br>
• Coil size (Outer diameter x Length): f10mm x 3.4m<br>
• Main unit size: f100 x 160 (overall height of 315) mm<br>
• Accessories: Stainless Steel (SUS304) support <br>
• Contents fluid can be powerfully cooled by passing cold water.
$0
Titanium Cooling Coil
AS ONE Corporation
<br>
• Model number: MR-02<br>
• Material: TTH-340W (Titanium pipe type II)<br>
• Heat transfer area: 0.14m2<br>
• Cooling water flow rate: 4 - 10L/min<br>
• Cooling tube plate thickness: 0.5tmm<br>
• Barb: Outer diameter 10.5mm<br>
• Coil size (Outer diameter x Length): f10mm x 4.5m<br>
• Main unit size: f100 x 196 (overall height of 350) mm<br>
• Accessories: Stainless Steel (SUS304) support <br>
• Contents fluid can be powerfully cooled by passing cold water.
$0
Double-Pipe Heat Exchanger
AS ONE Corporation
<br>
• Model number: NH-S1<br>
• Size: Overall height/230mm, Coil diameter/112mm<br>
• Heat transfer area: 0.037m2<br>
• Material: Stainless steel (SUS304)<br>
• Mounting section tube diameter (inside tube, outside tube): PT1/8<br>
• Coil height: 71mm<br>
• Coil length: 2.0m<br>
• Number of turns: 4 <br>
• The sent fluid to the inner/outer tube of dual tube respectively will be discharged after continuously cooling and heating influenced by temperature difference of inside /outside fluid.
$0
Double-Pipe Heat Exchanger
AS ONE Corporation
<br>
• Model number: NH-S2<br>
• Size: Overall height/230mm, Coil diameter/112mm<br>
• Heat transfer area: 0.07m2<br>
• Material: Stainless steel (SUS304)<br>
• Mounting section tube diameter (inside tube, outside tube): PT1/8<br>
• Coil height: 130mm<br>
• Coil length: 3.7m<br>
• Number of turns: 11.5 <br>
• The sent fluid to the inner/outer tube of dual tube respectively will be discharged after continuously cooling and heating influenced by temperature difference of inside /outside fluid.
$0