Elevating/Tilt Work Table With Casters

&bull; Size (mm): 150 x 182 x 76<br> &bull; Weight (kg): 1<br> &bull; Ozone generation: 0.004 ppm or less (Distance 150 mm)<br> &bull; Ion Balance (Distance 300 mm, Factory Default): ? 3 V or Less<br> &bull; air volume : 1.4 to 3.5 m3/min<br> &bull; Wind velocity: 1.5 to 2.9 m/sec (Straight Louver Distance 300 mm Center), 0.1 to 0.3 m/sec (Wide-angle Louver Distance 300 mm Center)<br> &bull; Input power supply: DC24V (AC Adapter Included AC100 to 240 V Compatible)<br> &bull; capacity: 12 VA<br> &bull; Output Voltage: ? 7,500 V 0-P<br> &bull; Accessories: AC adapter, wide-angle louver, lead wire for output signal (2 pieces Gumi)<br> &bull; ?Static Elimination Time: 1.5 Seconds or Less (Distance 300 mm, Factory Default)<br> &bull; ?environment used : Ambient Temperature : 0 to 40 ? C Ambient Humidity : 15 to 85 %RH (noncondensing)<br> &bull; ?filters: prefilter class<br> &bull; ?Output Signal: MOS FET Relay Non-Voltage Contact Output (NC Output) (OFF at high voltage error or fan error)<br> &bull; ?Noise: 63 dB (A) (Distance 1m)<br> &bull; ?material: Body/ABS Plastic, Discharge Needle/Tungsten, Stand/SECC, Louver/PC/ASA

&bull; Frontage (mm): 900<br> &bull; Depth (mm): 600<br> &bull; Height (mm): 740<br> &bull; Color: Green<br> &bull; equal load (kg): 800<br> &bull; Top board material: Steel<br> &bull; Mass (kg): 31<br> &bull; Assembly<br> &bull; Adjuster screw Size: M16x2 0<br> &bull; Adjuster adjustment range: 20mm<br> &bull; Body: Steel<br> &bull; Application: Various manufacturer, etc., factory work suitable.<br> &bull; Country of origin: Japan<br> &bull; Weight: 29.5kg<br> &bull; Manufacturer's model number: GWS0960<br> &bull; CODE No.: 301-1984

<br> &bull; Model number: TFV-01<br> &bull; Size: 125 x 36 x 78mm<br> &bull; Weight: Approximately 240g (including battery)<br> &bull; Display range: Wind speed/0 - 10m/s (value), 0 - 5m/s (bar graph), Temperature/0 - 50?<br> &bull; Resolution: Wind speed/0.01m/s, Temperature/0.1?<br> &bull; Accuracy: Wind speed/+/- 10%rdg +/- 0.1m/s (10 - 40?), Temperature/+/- 1? (at time of factory shipment)<br> &bull; Measuring method: Thermal type (thermistor)<br> &bull; Function: Peak hold, calibration (0.5m/s 1 point correction), external sensor automatic switching<br> &bull; Battery life: Approx 100 hours (using alkaline dry cell, at wind speed 1m/s)<br> &bull; Power supply: AA dry battery x 4 pieces (included for testing) or AC adapter (optional) <br> &bull; Possible to intuitively check wind velocity because bar graph expands and contracts in real time. <br> &bull; Adjusts display with anemometer by calibration function. <br> &bull; Possible to monitor wind speed of remote location with using external sensor(sold separately).

<br> &bull; Model number: Color sleeve for replacement (for f5mm shaft)<br> &bull; Material: POM (polyacetal) <br> &bull; Both hands to be free If you use the foot switch, continuous work is possible. <br> &bull; Because It is combination of sleeve bearing, can be stirred to ensure load it takes.

<br> &bull; Model number: Color sleeve for replacement (for f6mm shaft)<br> &bull; Material: POM (polyacetal) <br> &bull; Both hands to be free If you use the foot switch, continuous work is possible. <br> &bull; Because It is combination of sleeve bearing, can be stirred to ensure load it takes.