R & L

• O.D. Of Inlet: 9.25 mm

• I.D. Of Outlet: 7.0 mm

Bunsen burner 11mm, for LPG

• O.D. Of Inlet: 9.25 mm

• I.D. Of Outlet: 7.0 mm

Retort ring with bosshead 50mm

• Mild steel

• ID: 50mm

Retort ring with bosshead 75mm

• Mild steel

• ID: 75mm

Retort ring with bosshead 106mm

• Mild steel

• ID: 106mm

Tripod, circular, 210mm (H)

• Zinc plated steel
• 150 (OD) x 135mm (ID)

Test tube holder

• Constructed in spring steel and nickel plated

• Accepts tubes up to 50mm dia

• Overall length: 130mm

Meker burner 20mm, for LPG

• Made of brass & all nickel plated

• Top of the burner is fitted with a perforated steel head, which gives off multiple small but very hot flames

• Not fitted with an air regulator

• Burner head dia: 20mm (ceramic)

&bul

Bunsen burner 11mm, for Natural Gas

• O.D. Of Inlet: 9.25 mm

• I.D. Of Outlet: 7.0 mm

• With air regulator

• Brass finish

Bunsen burner 13mm, for LPG

• Overall height: 145 mm

• O.D. Of Inlet: 9.25 mm

• I.D. Of Outlet: 9.0 mm

• With air regulator

• Brass finish

Bypass burner, for LPG

• With gas control stopcock and pilot ignition flame

• All parts nickel-plated

• With air regulator

• Overall height: 171 mm

• O.D. Of Inlet: 9.25 mm

• I.D. Of Outlet: 9.0 mm

Lab Jack, plate size 150 x 150mm

• Made of aluminium with stainless steel operating screw

• The top and bottom plates are specially designed aluminium extrusion giving exceptional rigid and robust support without excessive weight

• The plates are blue anodised finis

Bunsen burner 11mm, for Coal Gas

• O.D. Of Inlet: 9.25 mm

• I.D. Of Outlet: 7.0 mm

• With air regulator

• Brass finish

Burette holder, Diecast alloy

• Can be clamped either vertically or horizontally to a 13mm retort rod using the plastic headed nickel plated steel screw

• Suitable for burettes up to 100ml capacity

Spread base, rod centre / foot centre 135mm

• Manufactured in cast iron and painted acrylic blue

• With central rod hole tapped 10mm fitted with rubber feet

Retort clamp

• Diecast in alloy and fitted with an aluminium shaft

• Accepts articles up to 85mm diameter

• Cork lined interlocking jaws

Retort base 160mm x 100mm (Blue Acrylic Base)

• Manufactured in steel

• Has 10mm tapped bush pressed in to them to take the 3108 series rods

• Fitted with rubber feet

Retort base 200mm x 125mm (Blue Acrylic Base)

• Manufactured in steel

• Has 10mm tapped bush pressed in to them to take the 3108 series rods

• Fitted with rubber feet

Retort rod 12.5 x 600mm (Aluminium)

• Threaded 10mm

• Rod dia: 12.5mm

• Rod length: 600mm

Hoffman clip 12mm, bottom hinged (Pack of 5)

• With fine adjusting screw

• Nickel plated brass