Slow Stirrer 1 Tandem Digital Display

<br> • Model number: ULS-1N<br> • Type: 1 tandem digital display<br> • Size (mm): 250x250x89<br> • Rotation speed: 5 - 100rpm<br> • Stirred capacity: 5L<br> • Rotation speed accuracy: ?1rpm (in all rotation ranges)<br> • Motor: DC brushless motor<br> • Magnet: Neodium magnet<br> • Material: top board, body exterior/stainless steel (SUS304)<br> • Power supply: 100VAC 50/60Hz<br> • *Demonstration equipment is available. <br> • Smooth and stable rotation is possible even at ultra low speed. <br> • Suitable for use in incubator thanks to low heat generation design. <br> • Sealed structure that is free from condensation worries. <br> • Rotation speed errors are very small, and the feedback mechanism makes rotation speed stable even while viscosity changes. <br> • Exterier is stainless steel that gives high chemical resistance, and its structure makes it difficult for liquid to enter body. <br> • 4-positions type is rotated by one motor to eliminate variability of rotation speed among positions.

AS ONE Corporation

Cheapest shipping from $0

SKU: 2-8155-11

MPN: 2-8155-11

GTIN: NULL

Stock Status: 1,000 pcs

Delivery Status: 1-3 days

Description

• Model number: ULS-1N
• Type: 1 tandem digital display
• Size (mm): 250x250x89
• Rotation speed: 5 - 100rpm
• Stirred capacity: 5L
• Rotation speed accuracy: ?1rpm (in all rotation ranges)
• Motor: DC brushless motor
• Magnet: Neodium magnet
• Material: top board, body exterior/stainless steel (SUS304)
• Power supply: 100VAC 50/60Hz
• *Demonstration equipment is available.
• Smooth and stable rotation is possible even at ultra low speed.
• Suitable for use in incubator thanks to low heat generation design.
• Sealed structure that is free from condensation worries.
• Rotation speed errors are very small, and the feedback mechanism makes rotation speed stable even while viscosity changes.
• Exterier is stainless steel that gives high chemical resistance, and its structure makes it difficult for liquid to enter body.
• 4-positions type is rotated by one motor to eliminate variability of rotation speed among positions.

Similar Products

[Global Model] Cool Incubator i-CUBE (HOT & COOL) Without Measuring Hole 100-240V

[Global Model] Cool Incubator i-CUBE (HOT & COOL) Without Measuring Hole 100-240V

AS ONE Corporation

• Specifications: Without measurement hole<br> • Drain water: Natural evaporation method<br> • Temperature settings range : 3 - 45 deg C <br> • Convection system : Natural convection system (5 sides cooling and heating)<br> • Cooling heater: Peltier Element<br> • Setting temperature: 1 deg C unit<br> • Temperature distribution accuracy: +/- 0.5 deg C (at 37 deg C)<br> • Temperature control accuracy: +/- 0.5 deg C <br> • Material : Frame/Steel painted finish , Interior/Aluminium , Door surface/ABS Plastic<br> • Power supply: AC100 to 240 V 50/60 Hz<br> • Power cord length : 2 meters (2P plug)<br> • Safety devices: overcurrent protection fuses<br> • Capacity: 28L<br> • Outer dimensions : 413 x 420 x 485mm <br> • Innder dimensions: 219 x 329 x 369mm<br> • Weight: 13.5 kg<br> • Accessories: Shelf board x 2 pieces<br> • Power consumption: 75W<br> • Country of origin: JAPAN<br> • Control Panel : English<br> • Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

Cool Incubator i-CUBE (HOT & COOL) with Measurement Hole

Cool Incubator i-CUBE (HOT & COOL) with Measurement Hole

AS ONE Corporation

• Specifications: Measurement Hole<br> • Drain water: natural evaporation type<br> • temperature settings range: 3 to 45 deg C<br> • convection formula : Natural convection formula (5-side cooling and heating)<br> • Cooling/Heating device: Peltier element<br> • Setting Temperature: 1 deg C Unit<br> • Temperature Distribution Accuracy: +/- 0.5 deg C (at 37 degrees C)<br> • Temperature Adjustment Accuracy: +/- 0.5 deg C <br> • material : Body/Steel Coating Finish , Interior/Aluminum , Door Surface/ABS Plastic<br> • power supply: AC100 to 240 V 50/60 Hz<br> • power cord length : 2 m (2P Plug)<br> • safety device: overcurrent protection fuse<br> • contents amount: 28 L<br> • external dimension : 420 x 413 x 485 mm<br> • inner size : 329 x 219 x 369 mm<br> • Weight: 13.5 kg<br> • Accessories: shelf board x 2 pieces<br> • Power Consumption: 75 W<br> • Country of origin: JAPAN

Cool Incubator I-CUBE For Shelves

Cool Incubator I-CUBE For Shelves

AS ONE Corporation

• Preliminary shelf board (cool incubator FCI-280 )<br> • Model number: FCI-SH

Simplified Formula Incubator for Plate

Simplified Formula Incubator for Plate

AS ONE Corporation

• SBS standard plate supported<br> • Temperature distribution accuracy: +/- 0.5? or less<br> • Temperature control system: PID control<br> • Alarm time setting range: 1 minute - 99 hours 59 minutes<br> • Temperature rise time (20? -> 70?): 25 minutes or less<br> • Number of microplates allowed for installation: 2 sheets<br> • Power supply: 100 - 240VAC 50/60Hz (including AC adapter)<br> • Weight: 4.0kg<br> • Temperature adjustment range (?): Room temperature +5 - 70<br> • Outer dimension (mm): 280 x 270 x 140<br> • Model number: MyBL-P2<br> • Control Panel : English<br> • Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

Shaking Incubator MyBLP2S

Shaking Incubator MyBLP2S

AS ONE Corporation

• SBS standard plate supported<br> • Temperature distribution accuracy: +/- 0.5? or less<br> • Temperature control system: PID control<br> • Alarm time setting range: 1 minute - 99 hours 59 minutes<br> • Amplitude: 2mm<br> • Temperature rise time (20? -> 70?): 25 minutes or less<br> • Number of microplates allowed for installation: 2 sheets<br> • Power supply: 100 - 240VAC 50/60Hz (including AC adapter)<br> • Size: 280 x 270 x 140mm<br> • Weight: 7.0kg<br> • Temperature adjustment range (?): Room temperature +5 - 70<br> • Rotation speed (rpm): 100 - 1200<br> • Front lab<br> • Model number: MyBL-P2S<br> • Control Panel : English<br> • Plug: Type A (https://en.wikipedia.org/wiki/Mains_electricity_by_country)

Copyright © 2026 LabPlus eStore. All rights reserved · Powered by LiteCart®