Auto Dry Glove Box 1247 x 535 x 500mm

<br> &bull; Material: Body/Transparent PMMA (acrylic resin), Valve, vacuum gauge mounting seat/PC (polycarbonate) resin<br> &bull; Pass box allowable vacuum degree: 1Torr (approx 133Pa)<br> &bull; Power supply: AC100V 50/60Hz<br> &bull; Weight: 19.4kg<br> &bull; Accessories: Digital Thermo-hygrometer (1-7584-21) x 1 piece, Vacuum gauge x 1 piece, Glove for Glove box (large) x 1 pair<br> &bull; Size (mm): 847 x 485 x 450<br> &bull; Weight (kg): 26<br> &bull; Model number: AD600 <br> &bull; Dehumidifies inside of box with polymer electrolyte membrane. <br> &bull; Maintenance cost can be minimized because there is no need to use consumables, such as silica gel, and power consumption is low. <br> &bull; There is no need to use heater, fan, or motor, which may cause operation noise or vibration. <br> &bull; Passbox is possible to vacuum-depressurize

<br> &bull; Material: Body/Transparent PMMA (acrylic resin), Valve, vacuum gauge mounting seat/PC (polycarbonate) resin<br> &bull; Pass box allowable vacuum degree: 1Torr (approx 133Pa)<br> &bull; Power supply: AC100V 50/60Hz<br> &bull; Weight: 29.0kg<br> &bull; Accessories: Digital Thermo-hygrometer (1-7584-21) x 1 piece, Vacuum gauge x 1 piece, Glove for Glove box (large) x 1 pair<br> &bull; Size (mm): 1047 x 535 x 500<br> &bull; Weight (kg): 36<br> &bull; Model number: AD800 <br> &bull; Dehumidifies inside of box with polymer electrolyte membrane. <br> &bull; Maintenance cost can be minimized because there is no need to use consumables, such as silica gel, and power consumption is low. <br> &bull; There is no need to use heater, fan, or motor, which may cause operation noise or vibration. <br> &bull; Passbox is possible to vacuum-depressurize

<br> &bull; Size (mm): 70 x 230 x 255<br> &bull; Connection port: outer diameter f6mm rigid tube or Rc 1/8 female screw<br> &bull; Operating pressure: 0.005MPa *<br> &bull; pressure of use: 0.08MPa or less * The product will not operate if the pressure difference between the two paths is less than this.<br> &bull; Accessories: Cartridge cartridge x 1 piece<br> &bull; [cartridge cartridge cartridge]<br> &bull; Cartridge size: CO2/approx. f40 x 134mm<br> &bull; Connection shape: 5/8 -18 UNF female screw<br> &bull; Amount of gas to be filled: CO 2/40 L (74 g) ? Standard: About 3 days in 1 piece (It depends on how you use it.)<br> &bull; *Cartridges are consumables. It does not regenerate even when pressurized.

<br> &bull; Quantity: 1 type<br> &bull; Measurement range: 0 to 199.9mS/cm (0 to 19.9 S/m) , 0 to 9900 ppm<br> &bull; Resolution<br> &bull; *10 to 199?S/cm: 1?S/cm<br> &bull; *2200 to 1999?S/cm: 1?S/cm<br> &bull; *32.0 to 19.99mS/cm: 0.01mS/cm<br> &bull; *420.0 to 199.9mS/cm: 0.1mS/cm<br> &bull; Temperature display range: 0 to 50 ?/0.1 ?<br> &bull; Calibration: Up to 3 points<br> &bull; Accuracy<br> &bull; *Accuracy Range 1 to 3 to ?2% F.S.<br> &bull; *?5% F.S. against Range 4.<br> &bull; Key Features<br> &bull; *Automatic range switching, automatic recognition of standard solution, temperature conversion (25 ? Temperature Conversion Factor 2% fixed),<br> &bull; *Temperature sensor adjustment function, auto hold, auto stability function, auto power off (30 minutes),<br> &bull; *Battery level indicator, sensor replaceable, TDS conversion function (Factor (0.4 to 1.0), 442, NaCl, EN 27888)<br> &bull; Waterproof: IP67<br> &bull; environment used : 5 to 40 ? , 85% relative humidity or less (Not dew condensation)<br> &bull; Power supply : CR 2032 Button battery x 2 pieces (test attachment)<br> &bull; external dimensions/Weight : 164mm x 29mm x 20mm (excluding projections)/about 50g (excluding battery)<br> &bull; Accessories: Eyedropper 1 piece, Instruction Manual, Quick Manual, Storage Case, Standard Conductivity Solution (1.41mS/cm) 1 piece (14 mL), Treatment Solution 1 piece (14 mL) <br> &bull; It is possible to perform drop measurement with a small sample (0.12 mL ~).<br> &bull; It can perform various measurements such as dropping, dipping, scooping and wiping (when using the sampling sheet of the attached consumables).<br> &bull; Equipped with a backlight liquid crystal, measurement values can be checked even in dark places.

&bull; Capacity: 1L<br> &bull; Mouth outer diameter x mouth inner diameter x body diameter x total height (mm): f82 x f75 x f89 x 187<br> &bull; Material: Body, lid/HDPE (high density polyethylene), Packing/LDPE (low density polyethylene)<br> &bull; *It is the price of 1 piece.<br> &bull; *Inner lid is not included.<br> &bull; RoHS2 (EU) 2015/863<br>