AS ONE Corporation
AS TOOL Pleated Cartridge Filter (PP) 250mm 0.2?m
AS ONE Corporation
<br>
• Total length (mm): 250<br>
• Filteration accuracy (?m): 0.2<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 250mm 0.5?m
AS ONE Corporation
<br>
• Total length (mm): 250<br>
• Filteration accuracy (?m): 0.5<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 250mm 1?m
AS ONE Corporation
<br>
• Total length (mm): 250<br>
• Filteration accuracy (?m): 1<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 250mm 3?m
AS ONE Corporation
<br>
• Total length (mm): 250<br>
• Filteration accuracy (?m): 3<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 250mm 5?m
AS ONE Corporation
<br>
• Total length (mm): 250<br>
• Filteration accuracy (?m): 5<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 250mm 20?m
AS ONE Corporation
<br>
• Total length (mm): 250<br>
• Filteration accuracy (?m): 20<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 250mm 40?m
AS ONE Corporation
<br>
• Total length (mm): 250<br>
• Filteration accuracy (?m): 40<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 500mm 0.2?m
AS ONE Corporation
<br>
• Total length (mm): 500<br>
• Filteration accuracy (?m): 0.2<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 500mm 0.5?m
AS ONE Corporation
<br>
• Total length (mm): 500<br>
• Filteration accuracy (?m): 0.5<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 500mm 1?m
AS ONE Corporation
<br>
• Total length (mm): 500<br>
• Filteration accuracy (?m): 1<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 500mm 5?m
AS ONE Corporation
<br>
• Total length (mm): 500<br>
• Filteration accuracy (?m): 5<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 500mm 10?m
AS ONE Corporation
<br>
• Total length (mm): 500<br>
• Filteration accuracy (?m): 10<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
AS TOOL Pleated Cartridge Filter (PP) 500mm 20?m
AS ONE Corporation
<br>
• Total length (mm): 500<br>
• Filteration accuracy (?m): 20<br>
• Material: Main unit / PP, Gasket / EPDM<br>
• Maximum operating temperature: 80 ?C<br>
• Maximum allowable differential pressure: 0.48MPa (25 ?C)<br>
• Dimensions: inner diameter / F30mm, outer diameter / F69mm <br>
• There is little elution.
$0
Twin COND Meter II LAQUAtwin (Waterproof)
AS ONE Corporation
<br>
• Quantity: 1 type<br>
• Measurement range: 0 to 199.9mS/cm (0 to 19.9 S/m) , 0 to 9900 ppm<br>
• Resolution<br>
• *10 to 199?S/cm: 1?S/cm<br>
• *2200 to 1999?S/cm: 1?S/cm<br>
• *32.0 to 19.99mS/cm: 0.01mS/cm<br>
• *420.0 to 199.9mS/cm: 0.1mS/cm<br>
• Temperature display range: 0 to 50 ?/0.1 ?<br>
• Calibration: Up to 3 points<br>
• Accuracy<br>
• *Accuracy Range 1 to 3 to ?2% F.S.<br>
• *?5% F.S. against Range 4.<br>
• Key Features<br>
• *Automatic range switching, automatic recognition of standard solution, temperature conversion (25 ? Temperature Conversion Factor 2% fixed),<br>
• *Temperature sensor adjustment function, auto hold, auto stability function, auto power off (30 minutes),<br>
• *Battery level indicator, sensor replaceable, TDS conversion function (Factor (0.4 to 1.0), 442, NaCl, EN 27888)<br>
• Waterproof: IP67<br>
• environment used : 5 to 40 ? , 85% relative humidity or less (Not dew condensation)<br>
• Power supply : CR 2032 Button battery x 2 pieces (test attachment)<br>
• external dimensions/Weight : 164mm x 29mm x 20mm (excluding projections)/about 50g (excluding battery)<br>
• Accessories: Eyedropper 1 piece, Instruction Manual, Quick Manual, Storage Case, Standard Conductivity Solution (1.41mS/cm) 1 piece (14 mL), Treatment Solution 1 piece (14 mL) <br>
• It is possible to perform drop measurement with a small sample (0.12 mL ~).<br>
• It can perform various measurements such as dropping, dipping, scooping and wiping (when using the sampling sheet of the attached consumables).<br>
• Equipped with a backlight liquid crystal, measurement values can be checked even in dark places.
$0
Aspirator Cooling Coil Tube
AS ONE Corporation
<br>
• Size (mm): f85 x 270<br>
• Coil size: f80 x 160mm (Total length approx . 2830mm)<br>
• Connection port diameter: outer diameter f10/inner diameter f9mm<br>
• Material : Stainless steel SUS304
$0
Sealing Sticker 100 Pieces
AS ONE Corporation
<br>
• Size (mm): 60 x 15<br>
• Quantity : 1 bag (100 pieces)<br>
• Material: PET <br>
• It is a seal for tamper-proof that white letters OPEN VOID appear when the seal is removed.<br>
• Because it does not leave glue, it does not soil the object.<br>
• The 7-digit unique number is printed on it, so it is possible to manage opening and unopening of chemicals and storage cabinets.<br>
• It can be managed safely.
$0
Controller For Cuvette Stirrer Simultaneous Controll (3 Output) Type
AS ONE Corporation
<br>
• Specification: Simultaneous control (3 output)<br>
• Material: Steel<br>
• Outer dimensions: 86 x 116 (Dimensions with protrusion: 126) x 39mm<br>
• Power supply: AC100 to 240 V 50/60Hz (AC Adapter)<br>
• Connection cord length: 1.5 m<br>
• Accessories: AC Adapter<br>
• *The stirrer is not included in the controller. <br>
• Stable low rotation for small containers!<br>
• Stable rotation is possible even at low speed.<br>
• Suitable for stirring small containers such as cuvettes.
$0
Controller For Cuvette Stirrer Individual Controll (3 Output) Type
AS ONE Corporation
<br>
• Specification: Individual control (3 output)<br>
• Material: Steel<br>
• Outer dimensions: 86 x 116 (Dimensions with protrusion: 126) x 39mm<br>
• Power supply: AC100 to 240 V 50/60Hz (AC Adapter)<br>
• Connection cord length: 1.5 m<br>
• Accessories: AC Adapter<br>
• *The stirrer is not included in the controller. <br>
• Stable low rotation for small containers!<br>
• Stable rotation is possible even at low speed.<br>
• Suitable for stirring small containers such as cuvettes.
$0
Cuvette Stirrer
AS ONE Corporation
<br>
• Specification: 50 to 1500rpm<br>
• Rotation speed: 50 to : 1500rpm<br>
• Size: f23 x 29mm<br>
• Motor: core less motor<br>
• Capacity: 10mL<br>
• Material: Aluminium, silicone Mold<br>
• Stirring system: Magnetic rotary stirring<br>
• Recommended stirrer bar: f2 x 5mm, f2 x 7mm, f3 x 6mm, f3 x 8mm, f4 x 6mm<br>
• *The stirrer does not come with the controller itself. <br>
• Stable low rotation for small containers!<br>
• Stable rotation is possible even at low speed.<br>
• The bottom of the stirrer is silicon mold, so it is stable.<br>
• Suitable for stirring small containers such as cuvettes.
$0
Economy Tubular Electric Furnace
AS ONE Corporation
<br>
• Outer dimensions (mm): 210 x 210 x 290<br>
• Inner dimensions (mm): 50 x 140<br>
• Inner capacity (L): 0.3<br>
• Temperature settings range: 100 to: 900 ?C/Temperature: 800 ?C<br>
• Temperature setting resolution: 1 ?C<br>
• Time setting resolution: 1 minute<br>
• Timer: ON/OFF/SV timer<br>
• Temperature control method: PID control<br>
• Safety mechanism: Sensor abnormality detection, over-rise prevention relay, over-current fuse<br>
• Sensor: K class thermocouple<br>
• Heater capacity: 800W<br>
• Material: Exterior/Steel, Heat resistant coating, Furnace/Ceramic fiber<br>
• Power supply: AC100V 50/60Hz<br>
• Weight: about 5.2kg<br>
• *There is no core tube attached to the main body. Be sure to use the core tube during operation. <br>
• Easy-to-use compact and personal tubular electric furnace<br>
• Compact design: A compact, personal, general-purpose tubular electric furnace.<br>
• Speedy temperature rise: A high-performance type with a rapid temperature rise time of approximately 28 minutes to the maximum temperature.<br>
• Heating under inert environment possible: By using the gas substitution unit, heat can be performed while replacing with inert gas.<br>
• Temperature setting and furnace temperature can be checked by digital display.<br>
• You can choose the material of the core tube according to the application.
$0