AS ONE Corporation
Ultra-Thin Type Chemical Closet (Wooden Chemical Closet) Drawer
AS ONE Corporation
<br>
• Model number: Drawer 1800<br>
• Size (mm): 245 x 473 x 1800<br>
• Material: Body/particle board, Rail/steel<br>
• Shelf size: 174 x 425mm<br>
• Number of stages: Up 2 stage rack + Down 4 stage rack<br>
• Drawer withstand load: Upper 25kg, Lower 100kg<br>
• Standard amount of storage : 500mL reagent bottle x 60 volumes<br>
• Weight: 58kg<br>
• Accessories: Key x 2 pieces <br>
• Ultra slim chemical storage with full width less than 250*mm* does not take space, therefore enable to use extra spaces in laboratory efficiently. <br>
• Safety specifications with earthquake resistant latch and cylinder lock. <br>
• Special dowels that prevent shelf boards from dropping down or coming out is adopted for shelf boards of opening door type. <br>
• Earthquake-resistant fixing brackets are supplied.
$0
Wooden Chemical Storage Unit (Ut-Lab.) 463 x 478 x 650
AS ONE Corporation
<br>
• Model number: DAP-T<br>
• Size (mm): 463 x 478 x 650<br>
• Material: Body/particle board, Rail/steel<br>
• Standard amount of storage : 500mL reagent bottle x 40 volumes<br>
• Withstand load: (Upper) 25kg, (Lower) 80kg (rail only 43kg)<br>
• Weight: 49kg <br>
• Possible to accommodated under laboratory table(H655*mm* or more). <br>
• Drawers have keys with different numbers, and each drawer is partitioned with partition boards, so they can be managed securely. <br>
• Design is coordinated with wooden laboratory table so it is arranged neat and tidy.
$0
Wooden Chemical Storage Unit (Ut-Lab.) 463 x 478 x 650
AS ONE Corporation
<br>
• Model number: DAP-G<br>
• Size (mm): 463 x 478 x 650<br>
• Material: Body/particle board, Rail/steel<br>
• Standard amount of storage : 500mL reagent bottle x 40 volumes, Gallon bottle x 4 volumes<br>
• Withstand load: (Upper) 25kg, Lower 80kg (rail only 43kg)<br>
• Weight: 49kg <br>
• Possible to accommodated under laboratory table(H655*mm* or more). <br>
• Drawers have keys with different numbers, and each drawer is partitioned with partition boards, so they can be managed securely. <br>
• Design is coordinated with wooden laboratory table so it is arranged neat and tidy.
$0
Medicine Paper Case Small
AS ONE Corporation
<br>
• Model number: for small<br>
• Size (mm): 104 x 105 x 78<br>
• Material: Acrylic resin<br>
• Maximum amount of storage 1000 sheets <br>
• Lid on case keeps medical paper clean. <br>
• Lid opens upwards, which makes taking paper out easier. <br>
• Entire case is sloped to keep paper sheets neatly stacked and easy to take out.
$0
Medicine Paper Case Medium
AS ONE Corporation
<br>
• Model number: for medium<br>
• Size (mm): 119 x 120 x 78<br>
• Material: Acrylic resin<br>
• Maximum amount of storage 1000 sheets <br>
• Lid on case keeps medical paper clean. <br>
• Lid opens upwards, which makes taking paper out easier. <br>
• Entire case is sloped to keep paper sheets neatly stacked and easy to take out.
$0
Medicine Paper Case Large
AS ONE Corporation
<br>
• Model number: for large<br>
• Size (mm): 134 x 135 x 78<br>
• Material: Acrylic resin<br>
• Maximum amount of storage 1000 sheets <br>
• Lid on case keeps medical paper clean. <br>
• Lid opens upwards, which makes taking paper out easier. <br>
• Entire case is sloped to keep paper sheets neatly stacked and easy to take out.
$0
Medicine Paper Case Extra-Large
AS ONE Corporation
<br>
• Model number: for extra-large<br>
• Size (mm): 164 x 165 x 78<br>
• Material: Acrylic resin<br>
• Maximum amount of storage 1000 sheets <br>
• Lid on case keeps medical paper clean. <br>
• Lid opens upwards, which makes taking paper out easier. <br>
• Entire case is sloped to keep paper sheets neatly stacked and easy to take out.
$0
Stainless Steel Basket Wagon
AS ONE Corporation
<br>
• Model number: NBW<br>
• Size (mm): 740 x 450 x 1050<br>
• Material: Stainless steel (SUS304)<br>
• Shelf height: First stage/350mm, Second stage/880mm (height from the floor)<br>
• Withstand load: 10 kg/shelf<br>
• Caster: f75mm silent caster (with diagonal stopper) <br>
• Stainless steel wagon that can hold two SUS baskets(0-1419-01~03)and be moved around. <br>
• Each of shelves holding SUS baskets has removable drainage tray. <br>
• Silent casters provide smooth quiet movement.
$0
Bottle Inclined Stand For Tubes
AS ONE Corporation
<br>
• Model number: For 3 tubes<br>
• Size (mm): 308 x 62 x 108<br>
• Material: Stainless steel (SUS304)<br>
• Applicable reagent bottle size: Body diameter f48 - 92mm, Overall height 105 - 220mm <br>
• Facilitates pipetting from reagent bottle. <br>
• Compatible with reagent bottles of 100~1000*ml*. <br>
• Made of highly chemical resistant stainless steel.
$0
Security Box for Select Lab 360 x 355 x 315
AS ONE Corporation
<br>
• Model number: M<br>
• Size (mm): 360 x 355 x 315<br>
• Effective inner dimension (mm): 324 x 332 x 265<br>
• Material: Body/steel (chemical resistance resin powder coating)<br>
• Attachable type: LOP-7L, 7, 9, LOG-7, 9, LOS-7, 9, LSG-7, 9, LSS-7L, 7, 9<br>
• Accessories: Key 3 volumes (for cylinder lock 2 volumes, for emergency release of mechanical numeric key lock 1 volume) <br>
• Double lock with the mechanical numeric keypad lock and cylinder lock does not required the power supply. <br>
• Movable shelves that can be attacked inside the cabinet are supplied(L only).
$0
Security Box for Select Lab 360 x 355 x 530
AS ONE Corporation
<br>
• Model number: L<br>
• Size (mm): 360 x 355 x 530<br>
• Effective inner dimension (mm): 324 x 332 x 480<br>
• Material: Body/steel (chemical resistance resin powder coating)<br>
• Attachable type: LOP-7L, 7, 9, LOG-7, 9, LOS-7, 9, LSG-7, 9, LSS-7L, 7, 9<br>
• Accessories: 1 shelf boards, Key 3 volumes (for cylinder lock 2 volumes, for emergency release of mechanical numeric key lock 1 volume) <br>
• Double lock with the mechanical numeric keypad lock and cylinder lock does not required the power supply. <br>
• Movable shelves that can be attacked inside the cabinet are supplied(L only).
$0
Flexible Needle 300mm
AS ONE Corporation
<br>
• Model number: FN-30<br>
• Size (mm): 300<br>
• Material: Stainless steel<br>
• Needle tip: 90? cut<br>
• Needle gauge: 22s<br>
• Length: 300mm<br>
• Connection shape: Female luer lock <br>
• Needle part is specially treated so that it is fully bendable.
$0
Digital Syringe Pump for 1 Syringe
AS ONE Corporation
<br>
• Model number: SPDC-1<br>
• Syringe number of hanging: 1 piece<br>
• Size (mm): 234 x 164 x 130<br>
• Weight (kg): Approximately 3.5<br>
• Flow rate setting range: 0.1 - 300mL/h (maximum stroke 110mm)<br>
• Speed range: 0.01 - 17.5mm/min<br>
• Correspond syringe: 10 - 100mL<br>
• Linear force: 9.5kg<br>
• With injection movement pause function (settings changable)<br>
• Safety device: Push block stop function, power failure display<br>
• Power supply: 100VAC 50/60Hz (including AC adapter)<br>
• Power cord length: 1.5m <br>
• High viscosity liquid such as 50,000mP?s CMC can also be pumped. <br>
• Syringe data for those of major manufacturers is already input so that you can easily select the one used. <br>
• Multiple conditions, such as injection amount and time, and amount injected per hour, can be set. <br>
• Setting conditions and cumulative injection amount are displayed.
$0
Digital Syringe Pump for 2 Syringes
AS ONE Corporation
<br>
• Model number: SPDC-2<br>
• Syringe number of hanging: 2 pieces<br>
• Size (mm): 234 x 184 x 130<br>
• Weight (kg): Approximately 4.0<br>
• Flow rate setting range: 0.1 - 300mL/h (maximum stroke 110mm)<br>
• Speed range: 0.01 - 17.5mm/min<br>
• Correspond syringe: 10 - 100mL<br>
• Linear force: 9.5kg<br>
• With injection movement pause function (settings changable)<br>
• Safety device: Push block stop function, power failure display<br>
• Power supply: 100VAC 50/60Hz (including AC adapter)<br>
• Power cord length: 1.5m<br>
• *Demonstration equipment is available. <br>
• High viscosity liquid such as 50,000mP?s CMC can also be pumped. <br>
• Syringe data for those of major manufacturers is already input so that you can easily select the one used. <br>
• Multiple conditions, such as injection amount and time, and amount injected per hour, can be set. <br>
• Setting conditions and cumulative injection amount are displayed.
$0
Metallic Safety Cover (For Heat Press Machine) for 5Ton
AS ONE Corporation
<br>
• Model number: AP-5<br>
• Specification: for 5ton type<br>
• Size (mm): 430 x 315 x 360<br>
• Material: Stainless steel (SUS430) <br>
• Protect workers from scattered samples during destructive test. <br>
• Dedicated for H300 series?HC300 series?H400 series(P.213).
$0
Metallic Safety Cover (For Heat Press Machine) for 10Ton
AS ONE Corporation
<br>
• Model number: AP-10<br>
• Specification: for 10ton type<br>
• Size (mm): 430 x 315 x 360<br>
• Material: Stainless steel (SUS430) <br>
• Protect workers from scattered samples during destructive test. <br>
• Dedicated for H300 series?HC300 series?H400 series(P.213).
$0
Metallic Safety Cover (For Heat Press Machine) for 15Ton
AS ONE Corporation
<br>
• Model number: AP-15<br>
• Specification: for 15ton type<br>
• Size (mm): 430 x 315 x 360<br>
• Material: Stainless steel (SUS430) <br>
• Protect workers from scattered samples during destructive test. <br>
• Dedicated for H300 series?HC300 series?H400 series(P.213).
$0
Polyvinyl Chloride Safety Cover (For High Pressure Jack) for 5T
AS ONE Corporation
<br>
• Model number: SP-5<br>
• Specification: for 5t type<br>
• Size (mm): 422 x 290 x 314<br>
• Material: Soft PVC (vinyl chloride resin)<br>
• Sheet thickness 0.5mm <br>
• Protect workers from scattered samples during destructive test. <br>
• This highly visible transparent cover can be washed with detergent. <br>
• SP-5 is dedicated for J-5(1-1187-02) and SP-15 for J-15(1-313-01)(Refer to above).
$0
Polyvinyl Chloride Safety Cover (For High Pressure Jack) for 15T
AS ONE Corporation
<br>
• Model number: SP-15<br>
• Specification: for 15t type<br>
• Size (mm): 422 x 290 x 314<br>
• Material: Soft PVC (vinyl chloride resin)<br>
• Sheet thickness 0.5mm <br>
• Protect workers from scattered samples during destructive test. <br>
• This highly visible transparent cover can be washed with detergent. <br>
• SP-5 is dedicated for J-5(1-1187-02) and SP-15 for J-15(1-313-01)(Refer to above).
$0
High Accuracy Electroformed Sieve (Nickel Filter) (JIS) Opening Dimension 23?m Pitch 40?m
AS ONE Corporation
<br>
• Model number: S23H30 (JIS)<br>
• Opening dimensions (?m): 23<br>
• Pitch (?m): 40<br>
• Material: Filter part/nickel, Frame part/stainless steel (SUS304)<br>
• Frame standards: JIS/JISZ8801-1 (f75mm) compliance, ISO/ISO3301-1 (f75mm) compliance, ASTM/ASTM E11 (f76mm) compliance<br>
• Hole shape: ?<br>
• Hole Diameter intersect: +/- 0.5?m (+/- 0.8?m for 15?m or more)<br>
• Accessories: Inspection certificate<br>
• Frame: JIS<br>
• Compliance Standards: Z8801<br>
• Inner diameter (mm): 75<br>
• Inner high (mm): 20<br>
• Outer high (mm): 26<br>
• Material: SUS304<br>
• *Hole shape ? is also available.<br>
• *H50 Series with low aperture ratio and stronger, thick mesh is also available.<br>
• *Adding support mesh (0.21mm ? 1.8mmP) is also available. Please contact with us. <br>
• X-ray lithography technology combined with advanced electroforming technology realizes this high accuracy sieve. <br>
• Non-woven mesh is adopted, enabling high speed dispensing and avoiding powder clogging. <br>
• Made of high corrosion-resistant material, this product can be used for corrosive powders. <br>
• Since it has total inspection certificate, possible to used with confidence.
$0