Auto Dry Desiccator Caster Specification

$0.00

  • Model:1-4169-02
Product may vary slightly from image representation.

• Auto dry type
• Material: Body/PMMA (acrylic), Frame/aluminum sash, Shelf board/stainless steel (SUS430)
• Knob for moving: It can be attached to the left and right frame at the top of the aluminum frame
• Dehumidification system: H2O electric decomposition discharge (using solid high polymer electrolyte membrane)
• Reaching humidity: Approximately 15%RH (after 12 hours, with no internal load, depending on the usage environment)
• Shelf board dimensions: 268 x 256 x 10mm
• Shelf board mounting pitch: 100mm (shelf rest position fixed) x 4 stages
• Shelf board load capacity: Approximately 5kg/board
• Total withstand load: Approx 10kg
• Door specification: Draw latch type
• Caster: F40mm Nylon made (with stopper)
• Power supply: AC100V 50/60Hz 4W
• Power cord length: Approximately 2m (2P plug)
• Body weight: 7.6kg
• Accessories: Shelf board x 2 (SUS430), knob for moving x 1
• Model number: SP-UTK
• Caster specification
• Size (mm): 302 x 318 x 600 (*The size excludes projections. )
• UT-Lab.
• *Temperature and humidity meter is not included.
• Inside of body is highly airtight.
• Select rubber-foot type for installation on desktop or floor surface.Select caster type for installation under lab bench or movement for each sample.
• This desiccator directly decomposes moisture inside chamber by electric current, and continuously removes it for stable dehumidification.
Manufacturers