Factory Work Tools & Supplies

• Size (mm): 150 x 182 x 76
• Weight (kg): 1
• Ozone generation: 0.004 ppm or less (Distance 150 mm)
• Ion Balance (Distance 300 mm, Factory Default): ? 3 V or Less
• air volume : 1.4 to 3.5 m3/min
• Wind velocity: 1.5 to 2.9 m/sec (Straight Louver Distance 300 mm Center), 0.1 to 0.3 m/sec (Wide-angle Louver Distance 300 mm Center)
• Input power supply: DC24V (AC Adapter Included AC100 to 240 V Compatible)
• capacity: 12 VA
• Output Voltage: ? 7,500 V 0-P
• Accessories: AC adapter, wide-angle louver, lead wire for output signal (2 pieces Gumi)
• ?Static Elimination Time: 1.5 Seconds or Less (Distance 300 mm, Factory Default)
• ?environment used : Ambient Temperature : 0 to 40 ? C Ambient Humidity : 15 to 85 %RH (noncondensing)
• ?filters: prefilter class
• ?Output Signal: MOS FET Relay Non-Voltage Contact Output (NC Output) (OFF at high voltage error or fan error)
• ?Noise: 63 dB (A) (Distance 1m)
• ?material: Body/ABS Plastic, Discharge Needle/Tungsten, Stand/SECC, Louver/PC/ASA

• Frontage (mm): 900
• Depth (mm): 600
• Height (mm): 740
• Color: Green
• equal load (kg): 800
• Top board material: Steel
• Mass (kg): 31
• Assembly
• Adjuster screw Size: M16x2 0
• Adjuster adjustment range: 20mm
• Body: Steel
• Application: Various manufacturer, etc., factory work suitable.
• Country of origin: Japan
• Weight: 29.5kg
• Manufacturer's model number: GWS0960
• CODE No.: 301-1984

• Model number: TFV-01
• Size: 125 x 36 x 78mm
• Weight: Approximately 240g (including battery)
• Display range: Wind speed/0 - 10m/s (value), 0 - 5m/s (bar graph), Temperature/0 - 50?
• Resolution: Wind speed/0.01m/s, Temperature/0.1?
• Accuracy: Wind speed/+/- 10%rdg +/- 0.1m/s (10 - 40?), Temperature/+/- 1? (at time of factory shipment)
• Measuring method: Thermal type (thermistor)
• Function: Peak hold, calibration (0.5m/s 1 point correction), external sensor automatic switching
• Battery life: Approx 100 hours (using alkaline dry cell, at wind speed 1m/s)
• Power supply: AA dry battery x 4 pieces (included for testing) or AC adapter (optional)
• Possible to intuitively check wind velocity because bar graph expands and contracts in real time.
• Adjusts display with anemometer by calibration function.
• Possible to monitor wind speed of remote location with using external sensor(sold separately).

• Model number: Color sleeve for replacement (for f5mm shaft)
• Material: POM (polyacetal)
• Both hands to be free If you use the foot switch, continuous work is possible.
• Because It is combination of sleeve bearing, can be stirred to ensure load it takes.

• Model number: Color sleeve for replacement (for f6mm shaft)
• Material: POM (polyacetal)
• Both hands to be free If you use the foot switch, continuous work is possible.
• Because It is combination of sleeve bearing, can be stirred to ensure load it takes.

• Model number: Color sleeve for replacement (for f7mm shaft)
• Material: POM (polyacetal)
• Both hands to be free If you use the foot switch, continuous work is possible.
• Because It is combination of sleeve bearing, can be stirred to ensure load it takes.

• Model number: Color sleeve for replacement (for f8mm shaft)
• Material: POM (polyacetal)
• Both hands to be free If you use the foot switch, continuous work is possible.
• Because It is combination of sleeve bearing, can be stirred to ensure load it takes.

• Standard
• Outer dimension (mm): 350 x 350 x 400
• Weight (kg): 4.6
• Material: Body, bottom side/PMMA (acrylic)
• Opening: f120mm (natural rubber with cut)
• Inner box is easily observable for inclined type, and space-saving type for prevention scattering.
• By being interlocked with optional fan unit, exhaust duct type can work by exhausting inner box.

• with Exhaust duct
• Outer dimension (mm): 350 x 391 x 400
• Weight (kg): 4.8
• Material: Body, bottom side/PMMA (acrylic)
• Opening: f120mm (natural rubber with cut)
• Adaptive exhaust duct size: f75mm
• Inner box is easily observable for inclined type, and space-saving type for prevention scattering.
• By being interlocked with optional fan unit, exhaust duct type can work by exhausting inner box.

• Lower suction
• Outer dimension (mm): 350 x 405 x 420
• Weight (kg): 5.2
• Material: Body, bottom side/PVC (vinyl chloride resin)
• Opening: f120mm (natural rubber with cut)
• Adaptive exhaust duct size: f75mm
• Inner box is easily observable for inclined type, and space-saving type for prevention scattering.
• By being interlocked with optional fan unit, exhaust duct type can work by exhausting inner box.

• Top plate/wooden plywood soft edges processing (surface antibacterial decorative plywood)
• Trestle frame: 40 x 20mm Steel pipe (melamine baking coating)
• Caster: f65mm (with front stopper x 2 pieces)
• Withstand load: Approx 80kg
• Weight: 17kg
• Model number: Basic work table
• Size (mm): 940 x 600 x 800
• Multipurpose combination bench
• Possible to combined or added according to purpose flexibly.
• Work surface has been antibacterial processed and soft edge finish.

• Inner dimension: 380 x 422 x 145mm
• Material: Poly plywood
• Weight: 6kg
• Model number: Drawer unit
• Size (mm): 448 x 468 x 200
• Multipurpose combination bench
• Possible to combined or added according to purpose flexibly.
• Work surface has been antibacterial processed and soft edge finish.

• Material: Top plate/wooden plywood soft edges processing (surface antibacterial decorative board), Strut/melamine baking 40 x 20mm square steel
• Caster: f65mm (with stopper x 2 pieces)
• Weight: 7kg
• Model number: WL
• Top board size (mm): 450 x 300
• Total height (mm): 1050
• *For light work, Is not suitable for haulage of heavy load.
• It is convenient for easy light work, such as record under experiment, communicating in writing, and is work table for standing postures.

• Material: hood / stainless steel (SUS304), mount / aluminum frame, door / transparent PVC (vinyl chloride Plastic), work plane / stainless (SUS304)
• Exhaust duct diameter: f 100 mm
• power supply: AC100V 50 / 60Hz
• fluorescent lamps: 15 W
• Caster: 75 mm (with adjuster)
• Work area enabled Dimensions: 698 x 499 x 599 mm
• air volume: approx. 4 m 2 / min (Door 1/3 open, 0.5 m/s face speed without load) * It may change by environment used
• Exhaust fan ability: 50Hz / 360 Pa ? 6.7 m3/min, 60Hz / 500 Pa ? 5.8 m3/min
• Accessory: Duct hose f 100 mm x 2.5 m
• Model number: CDB -700
• Size (mm): 700 x 600 x 1500
• Weight (kg): 45
• * Shipping, carrying, installation and assembly costs are required separately. Please contact us
• * Please contact your facility group for an application for local exhaust equipment
• ?<> AS ONE Corporation Facilities Group ? TEL : 0120-500-558 ? Fax : 0120-500-483 ? Email : setsubi@so.as-1.co.jp ? TEL Reception Time / 9 : 00 to 5 : 30 (Excluding soil, days and holidays)
• Height of work plane is 700*mm* same as office desk, sitting work and prolonged work is possible.
• Protect experimenter from gas during experiment by exhaust function.
• Work efficient with fluorescent light can be done.
• Inclination attaches front door so that it may be easy to work.
• Work plane is strong product made from stainless steel(SUS304).
• Please use in case of biological experiment, and medicine repack, etc.

• Model number: adjuster specification
• Size (mm): 500 x 430 x 570 to 920
• Material: Steel (powder coating)
• Uniform load tolerance: 50kg
• Caster: f 50mm (4-wheel with stopper)
• Height adjustment pitch: 50mm
• Tilt angle: 22.5 degrees, 45 degrees
• Top board size: 500 x 400mm
• Assembly (assembly guide: 30 minutes)
• Possible to work at any height since height can be adjusted.
• Possible to work with top board inclined since tilt function is equipped.
• Fall-prevention fence is equipped.

• Model number: caster specifications
• Size (mm): 500 x 430 x 620 to 970
• Material: Steel (powder coating)
• Uniform load tolerance: 50kg
• Caster: f 50mm (4-wheel with stopper)
• Height adjustment pitch: 50mm
• Tilt angle: 22.5 degrees, 45 degrees
• Top board size: 500 x 400mm
• Assembly (assembly guide: 30 minutes)
• Possible to work at any height since height can be adjusted.
• Possible to work with top board inclined since tilt function is equipped.
• Fall-prevention fence is equipped.